Xilinx .ucf

[Amontec Team, Laurent Gau]

Hi all,

Is that possible to invert a signal in the Xilinx .ucf file (thinking an
input or output signal on a PAD)?
if yes, which syntax?

Thanks in advance,

Laurent Gauch
www.amontec.com

------------ And now a word from our sponsor ---------------------
For a secure high performance FTP using SSL/TLS encryption
upgrade to SurgeFTP
---- See http://netwinsite.com/sponsor/sponsor_surgeftp.htm ----

 

[Muthu]

"Amontec Team, Laurent Gauch" <laurent.gauch@amontecDELETEALLCAPS.com> wrote in message news:<3fe06c60$1@news.vsnet.ch>...

Hi all,

Is that possible to invert a signal in the Xilinx .ucf file (thinking an
input or output signal on a PAD)?
if yes, which syntax?

Thanks in advance,

Laurent Gauch
www.amontec.com

------------ And now a word from our sponsor ---------------------
For a secure high performance FTP using SSL/TLS encryption
upgrade to SurgeFTP
---- See http://netwinsite.com/sponsor/sponsor_surgeftp.htm ----

It is not possible with the .ucf

You have to manually Edit the Floor Planner. But i am not sure, is
there any way to do this editing with scripts .. (command line)

-Muthu

 

[Antti Lukats]

"Amontec Team, Laurent Gauch" <laurent.gauch@amontecDELETEALLCAPS.com> wrote in message news:<3fe06c60$1@news.vsnet.ch>...

Hi all,

Is that possible to invert a signal in the Xilinx .ucf file (thinking an
input or output signal on a PAD)?
if yes, which syntax?

No

Antti