Xilinx Swift interface Licence (?) problem

A

Andrea Sabatini

Guest
I all.

I finally succeded (or at list I think I did!) in setting up the swift
libraries to simulate my design with a PPC in it (Xilinx EDK6.2), but when I
run the simulation with ModelSim XE I got this "strange" message:

# ** Error: Failure to license for PE Swift Interface.
# ** Error: Unable to check out PE Swift license.

WHY PE edition if I have a XE edition, I did everything required (see
http://www.xilinx.com/xlnx/xil_ans_display.jsp?getPagePath=14019 ) and I
compiled the Xilinx libraries in ModelSim with the following command line???

compxlib -s mti_se -f virtex2p:m -l vhdl -w

Does anyone out of there out to solve this issue?

Thanks in advance,

Andrea
 
The Swift interface is an option you have to pay extra for with ModelSim PE,
and I assume XE.

"Andrea Sabatini" <andrea@dapdesign_N_O_S_P_A_M_.com> wrote in message
news:412a11a2$0$65124$e4fe514c@news.xs4all.nl...
I all.

I finally succeded (or at list I think I did!) in setting up the swift
libraries to simulate my design with a PPC in it (Xilinx EDK6.2), but when
I
run the simulation with ModelSim XE I got this "strange" message:

# ** Error: Failure to license for PE Swift Interface.
# ** Error: Unable to check out PE Swift license.

WHY PE edition if I have a XE edition, I did everything required (see
http://www.xilinx.com/xlnx/xil_ans_display.jsp?getPagePath=14019 ) and I
compiled the Xilinx libraries in ModelSim with the following command
line???

compxlib -s mti_se -f virtex2p:m -l vhdl -w

Does anyone out of there out to solve this issue?

Thanks in advance,

Andrea
Click to expand...
 
On Mon, 23 Aug 2004 09:18:46 -0700, Robert Sefton wrote:

The Swift interface is an option you have to pay extra for with ModelSim PE,
and I assume XE.

"Andrea Sabatini" <andrea@dapdesign_N_O_S_P_A_M_.com> wrote in message
news:412a11a2$0$65124$e4fe514c@news.xs4all.nl...
I all.

I finally succeded (or at list I think I did!) in setting up the swift
libraries to simulate my design with a PPC in it (Xilinx EDK6.2), but when
I
run the simulation with ModelSim XE I got this "strange" message:

# ** Error: Failure to license for PE Swift Interface.
# ** Error: Unable to check out PE Swift license.

WHY PE edition if I have a XE edition, I did everything required (see
http://www.xilinx.com/xlnx/xil_ans_display.jsp?getPagePath=14019 ) and I
compiled the Xilinx libraries in ModelSim with the following command
line???

compxlib -s mti_se -f virtex2p:m -l vhdl -w

Does anyone out of there out to solve this issue?

Thanks in advance,

Andrea
Click to expand...
A SWIFT license is one of the things that differentiate PE from XE. You
have to upgrade to XE if you want to use SWIFT models.
 
"General Schvantzkoph" <schvantzkoph@yahoo.com> wrote in message
news:pan.2004.08.23.17.45.14.800673@yahoo.com...
On Mon, 23 Aug 2004 09:18:46 -0700, Robert Sefton wrote:

A SWIFT license is one of the things that differentiate PE from XE. You
have to upgrade to XE if you want to use SWIFT models.
Click to expand...
You're thinking of SE, which includes the SWIFT license. I think XE is just
a Xilinx-specific version of PE, not a PE upgrade. My guess is that XE users
have to pony up for the SWIFT license separately.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top