Xilinx PowerPC simulation problems

[Andrea Sabatini]

Hi all.

I have a project for the XilinxPlatformStudio 6.1.0.3i with a PPC in it. I
generated the simulation model (structural) but the PPC component (called
PPC_405) is not in the Xilinx related library (UNISIM) included with the
"library" statement in its wrapper, so I can not simulate that project.

I generated with the compedklib and cmpxlib the library with the simulation
models for the fpga architecture that I have to use but it did not work.

Does anyone there have suggestions?

Thanks in advance,

Andrea

 

[gilles]

Andrea Sabatini wrote:

Hi all.

I have a project for the XilinxPlatformStudio 6.1.0.3i with a PPC in it. I
generated the simulation model (structural) but the PPC component (called
PPC_405) is not in the Xilinx related library (UNISIM) included with the
"library" statement in its wrapper, so I can not simulate that project.

I generated with the compedklib and cmpxlib the library with the simulation
models for the fpga architecture that I have to use but it did not work.

Does anyone there have suggestions?

Thanks in advance,

Andrea

Dear,

Simulation of V2PRO hardware components (PPC405, ROCKETIO) need
installation of Swift Models.
See Xilinx answer records to know supported simulators and how to
install and use this models with your simulator.
For modelsim
http://www.xilinx.com/xlnx/xil_ans_display.jsp?getPagePath=14019

Hopping that helps you !!

Gilles