Xilinx DB-01 info?

J

John Patrick

Guest
I have two Xilinx DB-01 demo boards with the XC2064-33
FPGA, and the ML 4 cable and connector.

Does anyone have any info about these? I have no real
use for them, and was thinking about eBay... unless there
is someone here who makes me an offer.

John
 
I have two Xilinx DB-01 demo boards with the XC2064-33
FPGA, and the ML 4 cable and connector.

Does anyone have any info about these? I have no real
use for them, and was thinking about eBay... unless there
is someone here who makes me an offer.
They are very old. Best use would be in a museum.

I don't think software that supports them is available any more.
If you can find it, it probably needs an old version of DOS.

--
The suespammers.org mail server is located in California. So are all my
other mailboxes. Please do not send unsolicited bulk e-mail or unsolicited
commercial e-mail to my suespammers.org address or any of my other addresses.
These are my opinions, not necessarily my employer's. I hate spam.
 
Hal Murray wrote:
I have two Xilinx DB-01 demo boards with the XC2064-33
FPGA, and the ML 4 cable and connector.

Does anyone have any info about these? I have no real
use for them, and was thinking about eBay... unless there
is someone here who makes me an offer.

They are very old. Best use would be in a museum.

I don't think software that supports them is available any more.
If you can find it, it probably needs an old version of DOS.
Thanks. That's what I thought.

I also have a FPGA DEMO BOARD, with a XC3020A-7 and a XC4003A-6,
with the XChecker cable and flying leads. I think this is more
recent, but I can't find what software works with this.

John
 
In article <zxVXb.8259$PY.4716@newssvr26.news.prodigy.com>,
John Patrick <j.s.paNOtrick@ieNOee.orgNO> wrote:
I also have a FPGA DEMO BOARD, with a XC3020A-7 and a XC4003A-6,
with the XChecker cable and flying leads. I think this is more
recent, but I can't find what software works with this.
Not by much. Back, oh, in the old days (Fall 94, well, its the old
days in terms of FPGAs!) the class project was build a MIDI
synthesizer into a 4005. So this is still pretty darn old!
--
Nicholas C. Weaver nweaver@cs.berkeley.edu
 

Welcome to EDABoard.com

Sponsor

Back
Top