X error

[firegardeneve]

Hi everyone,



I am trying to run Abstract Generator 5.4 and was having some trouble
with the X display and was hoping someone might have come across the
error ....



Mapping /blah/blah/abstract.dxl...done.

Mapping /blah/blah/acl503.epll.

Allegro CL Enterprise Edition 5.0 [SPARC] (5/18/4 18:10) Copyright (C)
1985-1998, Franz Inc., Berkeley, CA, USA. All Rights Reserved.

;; Optimization settings: safety 1, space 1, speed 2, debug 3.

;; For a complete description of all compiler switches given the ;;
current optimization settings evaluate (explain-compiler-settings).

;;---

;; Current reader case mode: :case-sensitive-lower ; Autoloading for
excl::list-copy-seq*:

; Fast loading from bundle code/seq2.fasl.

; Using Design Planner hierarchy: /blah/blah/tools

; Initializing galaxy...

Load the resource file

'/blah/blah/pillar.vr'.

An error has occurred. The following chain of information is
available:

error 1: /Return/

message: X error: BadAccess (attempt to access private
resource denied); serial: 403; major: 131; minor: 1; resource:
11534345;



Until last night I was able to run it after vnc-ing into another
server and then ssh-ing into the server i work on. But now I am
getting the same error again. And sometimes the window pops up and
dies.


Any ideas? There's obviously some display setting that is screwing
things up.. but I have no clue what it might be...



Mallika

 

[Graeme Bunyan]

firegardeneve wrote:

Hi everyone,



I am trying to run Abstract Generator 5.4 and was having some trouble
with the X display and was hoping someone might have come across the
error ....



Mapping /blah/blah/abstract.dxl...done.

Mapping /blah/blah/acl503.epll.

Allegro CL Enterprise Edition 5.0 [SPARC] (5/18/4 18:10) Copyright (C)
1985-1998, Franz Inc., Berkeley, CA, USA. All Rights Reserved.

;; Optimization settings: safety 1, space 1, speed 2, debug 3.

;; For a complete description of all compiler switches given the ;;
current optimization settings evaluate (explain-compiler-settings).

;;---

;; Current reader case mode: :case-sensitive-lower ; Autoloading for
excl::list-copy-seq*:

; Fast loading from bundle code/seq2.fasl.

; Using Design Planner hierarchy: /blah/blah/tools

; Initializing galaxy...

Load the resource file

'/blah/blah/pillar.vr'.

An error has occurred. The following chain of information is
available:

error 1: /Return/

message: X error: BadAccess (attempt to access private
resource denied); serial: 403; major: 131; minor: 1; resource:
11534345;



Until last night I was able to run it after vnc-ing into another
server and then ssh-ing into the server i work on. But now I am
getting the same error again. And sometimes the window pops up and
dies.


Any ideas? There's obviously some display setting that is screwing
things up.. but I have no clue what it might be...



Mallika

Hi Mallika,

It's not something I've seen before, but here are a few things you could try
which may help:

* Make sure your display is set correctly and that you've done an 'xhost
+mallika' command on your local display machine (assuming your username is
mallika).

* Try running it natively on the machine (ie. not using VNC). If this works,
try to use the same display settings for your vnc session ('xdpyinfo' should
give you the resolution and colour depth of the display).

* Try different VNC settings - 8-bit, 16-bit, 24-bit, different resolutions,
etc.

Other than that, I'm afraid that's all I can think of. Neither the
common-lisp error nor the X error are particularly indicative of the problem,
sadly.

Best regards,
Graeme.