Guest
I am looking for the schematics of the serial interface T1678 between
the wiltron 68XXX synthesizer and a PC in hyper terminal mode : the
generator has a RJ45 connector on the rear panel but it contains two
RS232, one for documented calibration thru the PC and another one for
proprietary use and the box splits the two with two RJ11 connectors,
only one going to the PC thru an RJ11 to DB9 or 25 adapter. The wiring
of the RJ45 on the rear panel is equaly adequate ( I have got no
schematics of this generator)
I am looking too for the software Wilton PN 2300-104 for RF level
calibration.
Thanks
the wiltron 68XXX synthesizer and a PC in hyper terminal mode : the
generator has a RJ45 connector on the rear panel but it contains two
RS232, one for documented calibration thru the PC and another one for
proprietary use and the box splits the two with two RJ11 connectors,
only one going to the PC thru an RJ11 to DB9 or 25 adapter. The wiring
of the RJ45 on the rear panel is equaly adequate ( I have got no
schematics of this generator)
I am looking too for the software Wilton PN 2300-104 for RF level
calibration.
Thanks