Why does NCVerilog fail to annotate these timing checks?

[Kelvin]

Why my NCVerilog fail to annotate these three timing checks?

Thanks
Kelvin







Annotating SDF timing data:
Compiled SDF file: sdm_wlan_worst_max.sdf.X
Log file:
Backannotation scope: tsdg.sdm_wlan
Configuration file:
MTM control:
Scale factors:
Scale type:
ncelab: *W,SDFNET: Failed Attempt to annotate to non-existent timing check
(RECOVERY (posedge CL) (posedge CK) (64.11)) of instance
tsdg.sdm_wlan.\r_sumout4_reg[2] of module SCJFD21S20.
ncelab: *W,SDFNET: Failed Attempt to annotate to non-existent timing check
(SETUP (posedge D) (posedge CK) (188.037)) of instance
tsdg.sdm_wlan.\r_sumout4_reg[2] of module SCJFD21S20.
ncelab: *W,SDFNET: Failed Attempt to annotate to non-existent timing check
(SETUP (negedge D) (posedge CK) (187.369)) of instance
tsdg.sdm_wlan.\r_sumout4_reg[2] of module SCJFD21S20.
ncelab: *W,SDFNET: Failed Attempt to annotate to non-existent timing check
(HOLD (posedge D) (posedge CK) (114.384)) of instance
tsdg.sdm_wlan.\r_sumout4_reg[2] of module SCJFD21S20.
ncelab: *W,SDFNET: Failed Attempt to annotate to non-existent timing check
(HOLD (negedge D) (posedge CK) (114.766)) of instance
tsdg.sdm_wlan.\r_sumout4_reg[2] of module SCJFD21S20.
ncelab: *W,SDFNET: Failed Attempt to annotate to non-existent timing check
(RECOVERY (posedge CL) (posedge CK) (64.11)) of instance
tsdg.sdm_wlan.r_ovf3_reg of module SCJFD21S20.
ncelab: *W,SDFNET: Failed Attempt to annotate to non-existent timing check
(SETUP (posedge D) (posedge CK) (189.775)) of instance
tsdg.sdm_wlan.r_ovf3_reg of module SCJFD21S20.
ncelab: *W,SDFNET: Failed Attempt to annotate to non-existent timing check
(SETUP (negedge D) (posedge CK) (187.682)) of instance
tsdg.sdm_wlan.r_ovf3_reg of module SCJFD21S20.
....