P
peek^
Guest
Hi. I have a PCB design. Basically I want to know some places where I can
get them printed very cheap.
Thank you.
get them printed very cheap.
Thank you.
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
J
Jack
Guest
http://www.expresspcb.com/ExpressPCBHtm/SpecsMiniboard.htm
"peek^" <sniffpeek@hotmail.com> wrote in message
news:KgCrh.27648$FY2.5536@bignews1.bellsouth.net...
"peek^" <sniffpeek@hotmail.com> wrote in message
news:KgCrh.27648$FY2.5536@bignews1.bellsouth.net...
Hi. I have a PCB design. Basically I want to know some places where I
can get them printed very cheap.
Thank you.
P
peek^
Guest
Is there anything cheaper than that?
J
Jack
Guest
That's a pretty reasonable price considering you get 3 boards and they
supply the layout software.
This is probably the cheapest source but I have never used them and don't
know anyone who has.
http://www.pcbcart.com/cart.php?target=product&product_id=2&pageID=0
If you have more time than money and the circuit has not been prototyped you
are probably best advised to wire wrap the first board to make sure it
works.
"peek^" <sniffpeek@hotmail.com> wrote in message
news:1sKrh.4379$Oe2.4043@bignews7.bellsouth.net...
supply the layout software.
This is probably the cheapest source but I have never used them and don't
know anyone who has.
http://www.pcbcart.com/cart.php?target=product&product_id=2&pageID=0
If you have more time than money and the circuit has not been prototyped you
are probably best advised to wire wrap the first board to make sure it
works.
"peek^" <sniffpeek@hotmail.com> wrote in message
news:1sKrh.4379$Oe2.4043@bignews7.bellsouth.net...
Is there anything cheaper than that?
G
GM
Guest
"peek^" <sniffpeek@hotmail.com> wrote in message
news:KgCrh.27648$FY2.5536@bignews1.bellsouth.net...
really tryied them, so I am not sure if the quality of the PCBs that they
produce follows an inverse law with respect to how much they cost you, which
I assume is not the case. Just Google
news:KgCrh.27648$FY2.5536@bignews1.bellsouth.net...
There are some small Chinese PCB manufacturers that sell cheap, but neverHi. I have a PCB design. Basically I want to know some places where I
can
get them printed very cheap.
Thank you.
really tryied them, so I am not sure if the quality of the PCBs that they
produce follows an inverse law with respect to how much they cost you, which
I assume is not the case. Just Google
G
Geoff
Guest
J
JeffM
Guest
"peek^" <sniffpeek@ hotmail.com> wrote
It sounds like you want them *fabricated*.
It is possible to make 2-layer hobby boards yourself quite cheaply.
http://www.fullnet.com/~tomg/gooteepc.htm
http://www.google.com/search?q=press-n-peel
BTW, your Usenet technique could use some work.
http://66.102.9.104/search?q=cache:SXIajvWUVHAJ:groups.google.com/support/bin/answer.py=answer=12348+Tempting-though-it-is-*-*-*-*-*-*+remove-*-*-*-irrelevant+STOP+before.the.original.*.*+zz+Summarize.what.you're.following.up+BOTTOM+*.*.*.relevant.*+Usenet
Jack TOP-POSTED:
2) Their software does NOT allow easy printing to document your work.
3) Their software does NOT produce gerbers, making it LOCK-IN-WARE
I want to know some places where I can get them printed very cheap.
If you want them *printed*, take your artwork to Kinko's.
It sounds like you want them *fabricated*.
It is possible to make 2-layer hobby boards yourself quite cheaply.
http://www.fullnet.com/~tomg/gooteepc.htm
http://www.google.com/search?q=press-n-peel
BTW, your Usenet technique could use some work.
http://66.102.9.104/search?q=cache:SXIajvWUVHAJ:groups.google.com/support/bin/answer.py=answer=12348+Tempting-though-it-is-*-*-*-*-*-*+remove-*-*-*-irrelevant+STOP+before.the.original.*.*+zz+Summarize.what.you're.following.up+BOTTOM+*.*.*.relevant.*+Usenet
Jack TOP-POSTED:
Anything done up to this point will have to be redone in their program.expresspcb.com
1) You have to use THEIR software.
2) Their software does NOT allow easy printing to document your work.
3) Their software does NOT produce gerbers, making it LOCK-IN-WARE