Guest
I'm curious about what this is. http://i199.photobucket.com/albums/aa115/jimi_026/glassres.jpg
The markings on it say, T1 1% US 60G. Could it be 60gig ohms?
The markings on it say, T1 1% US 60G. Could it be 60gig ohms?
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
B
Boris Mohar
Guest
On Thu, 16 Aug 2007 22:53:34 -0000, jfezl07@googlemail.com wrote:
resistors.
--
--
Posted via a free Usenet account from http://www.teranews.com
It could be since it is encapsulated in glass. I have few one Tera ohmI'm curious about what this is. http://i199.photobucket.com/albums/aa115/jimi_026/glassres.jpg
The markings on it say, T1 1% US 60G. Could it be 60gig ohms?
resistors.
--
--
Posted via a free Usenet account from http://www.teranews.com
M
Mike Harrison
Guest
On Thu, 16 Aug 2007 19:25:54 -0400, Boris Mohar <borism_-void-_@sympatico.ca> wrote:
meaningful.
Quite possibly, but mounted on uncoated FR4 as it appears to be I doubt the 1% would be veryOn Thu, 16 Aug 2007 22:53:34 -0000, jfezl07@googlemail.com wrote:
I'm curious about what this is. http://i199.photobucket.com/albums/aa115/jimi_026/glassres.jpg
The markings on it say, T1 1% US 60G. Could it be 60gig ohms?
It could be since it is encapsulated in glass. I have few one Tera ohm
resistors.
meaningful.
Guest
On 17 Aug, 01:49, Mike Harrison <m...@whitewing.co.uk> wrote:
Would it be ok if the glass body wasn't touching the board? I read
something about making very high value resistors with a piece of
insulation. The resistor is from this circuit; http://www.bargeconcepts.com/bp/hpschem.html
I was wondering why such high value resistors were in there. It's R1
and R2 in the schematic. I was guessing Q1 and Q2 would have to be
darlingtons for it to work. Any thoughts on that?
On Thu, 16 Aug 2007 19:25:54 -0400, Boris Mohar <borism_-voi...@sympatico.ca> wrote:
On Thu, 16 Aug 2007 22:53:34 -0000, jfez...@googlemail.com wrote:
I'm curious about what this is.http://i199.photobucket.com/albums/aa115/jimi_026/glassres.jpg
The markings on it say, T1 1% US 60G. Could it be 60gig ohms?
It could be since it is encapsulated in glass. I have few one Tera ohm
resistors.
Quite possibly, but mounted on uncoated FR4 as it appears to be I doubt the 1% would be very
meaningful.
Would it be ok if the glass body wasn't touching the board? I read
something about making very high value resistors with a piece of
insulation. The resistor is from this circuit; http://www.bargeconcepts.com/bp/hpschem.html
I was wondering why such high value resistors were in there. It's R1
and R2 in the schematic. I was guessing Q1 and Q2 would have to be
darlingtons for it to work. Any thoughts on that?