Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Basically, your choice is to replace the control board.I'm trying to repair a Weller soldering station model # EC 1002.It has an ic
marked weller 185 9307 also a xistor marked L4004f91.Can anyone tell me what
these are and if there's a replacement for them?Any help would be greatly
appreciated.
Bill
Don't know about the 185 9307 part, but the L4004F91 part would appear to bembhelect wrote:
I'm trying to repair a Weller soldering station model # EC 1002.It has
an ic
marked weller 185 9307 also a xistor marked L4004f91.Can anyone tell me
what
these are and if there's a replacement for them?Any help would be
greatly
appreciated.
Bill
Basically, your choice is to replace the control board.
Sometimes, you can find them new or used on Ebay.
Are you sure the control board is bad and that the pencil is
OK?
BOB
Check this out to see if its the same."BOB URZ" <"sound(remove)"@inetnebr.com> wrote in message
news:3FCAAEB1.CA1A763@inetnebr.com...
mbhelect wrote:
I'm trying to repair a Weller soldering station model # EC 1002.It has
an ic
marked weller 185 9307 also a xistor marked L4004f91.Can anyone tell me
what
these are and if there's a replacement for them?Any help would be
greatly
appreciated.
Bill
Basically, your choice is to replace the control board.
Sometimes, you can find them new or used on Ebay.
Are you sure the control board is bad and that the pencil is
OK?
BOB
Don't know about the 185 9307 part, but the L4004F91 part would appear to be
a Teccor L4004 Triac. Go to their web site at www.teccor.com and search for
that part number.
--
Tweetldee
Tweetldee at att dot net (Just subsitute the appropriate characters in the
address)
Never take a laxative and a sleeping pill at the same time!!
mbhelect wrote:
I'm trying to repair a Weller soldering station model # EC 1002.It has
an ic
marked weller 185 9307 also a xistor marked L4004f91.Can anyone tell me
what
these are and if there's a replacement for them?Any help would be
greatly
appreciated.
Bill
Basically, your choice is to replace the control board.
Sometimes, you can find them new or used on Ebay.
Are you sure the control board is bad and that the pencil is
OK?
BOB
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----