Weller EC1002

[mbhelect]

Would like some help in repairing my Weller EC1002 soldering station.It will
run the EC1302A iron but not the EC1201a iron.Any help would be greatly
appreciated.

Bill

 

[Jon Elson]

mbhelect wrote:

Would like some help in repairing my Weller EC1002 soldering station.It will
run the EC1302A iron but not the EC1201a iron.Any help would be greatly
appreciated.

Bill




If the temp sensor goes open, you get a reading of 959 F or something

wild like that,
and no heat. The sensor is pretty expensive. If your iron has 2 gold
pins in the
connector, measure between them with an ohmmeter. If it reads infinity, you
need a new sensor. You can compare the two irons.

Jon