S
Shenoki ANGCHANGCO
Guest
Warning from spectre during circuit read-in.
WARNING (SFE-2957): No schematic subckt definition is available, spf port order is used.Warning from spectre during circuit read-in.
I got this error in my post sim and it does not run my post sim dspf when I run it tgt with my pre sim the value does not change and it affected all of my previous cell
--
---*DISCLAIMER AND CONFIDENTIALITY NOTICE* The Mindanao State
University-Iligan Institute of Technology <http://www.iit.edu.ph/>Â
(MSU-IIT) makes no warranties of any kind, whether expressed or implied,
with respect to the MSU-IIT e-mail resources it provides. MSU-IIT will not
be responsible for damages resulting from the use of MSU-IIT e-mail
resources, including, but not limited to, loss of data resulting from
delays, non-deliveries, missed deliveries, service interruptions caused by
the negligence of a MSU-IIT employee, or by the User\'s error or omissions.
MSU-IIT specifically denies any responsibility for the accuracy or quality
of information obtained through MSU-IIT e-mail resources, except material
represented as an official MSU-IIT record. Any views expressed in this
e-mail are those of the individual sender and may not necessarily reflect
the views of MSU-IIT, except where the message states otherwise and the
sender is authorized to state them to be the views of MSU-IIT. The
information contained in this e-mail, including those in its attachments,
is confidential and intended only for the person(s) or entity(ies) to which
it is addressed. If you are not an intended recipient, you must not read,
copy, store, disclose, distribute this message, or act in reliance upon the
information contained in it. If you received this e-mail in error, please
contact the sender and delete the material from any computer or system.
WARNING (SFE-2957): No schematic subckt definition is available, spf port order is used.Warning from spectre during circuit read-in.
I got this error in my post sim and it does not run my post sim dspf when I run it tgt with my pre sim the value does not change and it affected all of my previous cell
--
---*DISCLAIMER AND CONFIDENTIALITY NOTICE* The Mindanao State
University-Iligan Institute of Technology <http://www.iit.edu.ph/>Â
(MSU-IIT) makes no warranties of any kind, whether expressed or implied,
with respect to the MSU-IIT e-mail resources it provides. MSU-IIT will not
be responsible for damages resulting from the use of MSU-IIT e-mail
resources, including, but not limited to, loss of data resulting from
delays, non-deliveries, missed deliveries, service interruptions caused by
the negligence of a MSU-IIT employee, or by the User\'s error or omissions.
MSU-IIT specifically denies any responsibility for the accuracy or quality
of information obtained through MSU-IIT e-mail resources, except material
represented as an official MSU-IIT record. Any views expressed in this
e-mail are those of the individual sender and may not necessarily reflect
the views of MSU-IIT, except where the message states otherwise and the
sender is authorized to state them to be the views of MSU-IIT. The
information contained in this e-mail, including those in its attachments,
is confidential and intended only for the person(s) or entity(ies) to which
it is addressed. If you are not an intended recipient, you must not read,
copy, store, disclose, distribute this message, or act in reliance upon the
information contained in it. If you received this e-mail in error, please
contact the sender and delete the material from any computer or system.