wanted 12 vdc to 240 volt ac inverter schematic ( s ) 100

M

mark krawczuk

Guest
hi, any body know where i can get a schematic ( s ) of 12 volt to 240 vac
inverter 100 to 200 watt ?

something with pretty well easy to obtain parts .. i`ve had a half decent
look on the net , found some good ones, but maybe some one has others ?

mark krawczuk
 
"mark krawczuk" <krawczuk@adam.com.au> wrote in message
news:r_mdnYGK6dN1EcPXnZ2dnUVZ_hGdnZ2d@adnap.net.au...
hi, any body know where i can get a schematic ( s ) of 12 volt to 240 vac
inverter 100 to 200 watt ?
Click to expand...
Far easier to just buy one these days. I've seen 150W ones for under $40. I
doubt you could buy the parts much cheaper than that.

MrT.
 
"mark krawczuk = crackpot "

hi, any body know where i can get a schematic ( s ) of 12 volt to 240 vac
inverter 100 to 200 watt ?

something with pretty well easy to obtain parts ..
Click to expand...

** How fucking REDICULOUS !!!!!

You are a TIME WASTING FUCKHEAD - pal.

Piss off and GO DROP DEAD !!!




..... Phil
 
"Mr.T"
"mark krawczuk = mark crackpot "
?
hi, any body know where i can get a schematic ( s ) of 12 volt to 240
vac
inverter 100 to 200 watt ?

Far easier to just buy one these days. I've seen 150W ones for under $40.
I
doubt you could buy the parts much cheaper than that.
Click to expand...
** Customer gave me a 300 watt inverter to fix about a month ago.

Inside were 2 ferrite transformers, 8 high current TO220 mosfets, 8 high
voltage TO220 mosfets, 3 ICs and dozens of diodes transistors & passives.

Over the counter in Sydney would cost you well over $200 to buy all the
bits and the transformers are naturally custom wound jobs.

The allow case alone would cost $40 .



..... Phil
 
HEY PHIL YOU ARE A TROLL AND A NEWBIE.... GO BACK TO FIXING UP TOASTERS.
ONE DAY PHIL I`M GONNA FIND YA AND I WILL KILL YOU .

I WATCH YOU THRU YA BEDROOM WINDOW WHILE YOU SCREW YOUR HEDGE HOG , THEN
I watch the sweat drip down the side of your face when you have nightmares
about me."

"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:7c7ii6F25idk6U1@mid.individual.net...
"mark krawczuk = crackpot "

hi, any body know where i can get a schematic ( s ) of 12 volt to 240
vac inverter 100 to 200 watt ?

something with pretty well easy to obtain parts ..


** How fucking REDICULOUS !!!!!

You are a TIME WASTING FUCKHEAD - pal.

Piss off and GO DROP DEAD !!!




.... Phil
Click to expand...
 
"mark krawczuk = crackpot "

HEY PHIL YOU ARE A TROLL AND A NEWBIE..
Click to expand...

** You gotta believe god put cretins like "mark" on earth to give the rest
of us someone to laugh at.




...... Phil
 
mark krawczuk wrote:
hi, any body know where i can get a schematic ( s ) of 12 volt to
240 vac inverter 100 to 200 watt ?

something with pretty well easy to obtain parts .. i`ve had a half
decent look on the net , found some good ones, but maybe some one has
others ?
mark krawczuk
Click to expand...
No chance of building one close to the price you can buy one for
off-the-shelf.
$55 at Jaycar retail:
http://jaycar.com.au/productView.asp?ID=MI5102&keywords=av&form=KEYWORD

Dave.

--
================================================
Check out my Electronics Engineering Video Blog & Podcast:
http://www.alternatezone.com/eevblog/
 
David L. Jones wrote:
mark krawczuk wrote:
hi, any body know where i can get a schematic ( s ) of 12 volt to
240 vac inverter 100 to 200 watt ?

something with pretty well easy to obtain parts .. i`ve had a half
decent look on the net , found some good ones, but maybe some one has
others ?
mark krawczuk

No chance of building one close to the price you can buy one for
off-the-shelf.
$55 at Jaycar retail:
http://jaycar.com.au/productView.asp?ID=MI5102&keywords=av&form=KEYWORD

Dave.

You can even get them at aldi
Click to expand...
 
"Phil Allison"


The *alloy* case alone would cost $40 alone.l




..... Phil
 
"mark krawczuk = crackpot "
you wanker have you ever thought taht i might have my own case and parts u
fukwit ?
Click to expand...

** You did not claim to before and still are not claiming to have any.

So no - I did not and still do not think that.

So you are a congenital LIAR as well as a criminal psychopath.




...... Phil
 
you wanker have you ever thought taht i might have my own case and parts u
fukwit ?



"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:7c8fm2F25inunU1@mid.individual.net...
"Phil Allison"


The *alloy* case alone would cost $40 alone.l




.... Phil
Click to expand...
 
tell me where u live phil and i`ll kill ya.


"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:7caefvF263m23U1@mid.individual.net...
"mark krawczuk = crackpot "

you wanker have you ever thought taht i might have my own case and parts
u fukwit ?


** You did not claim to before and still are not claiming to have any.

So no - I did not and still do not think that.

So you are a congenital LIAR as well as a criminal psychopath.




..... Phil
Click to expand...
 
you fuckwit phil , what do you think i was going to do with a schematic ,
i was going to make one, cause i felt like it , AND DO I HAVE TO SAY
EVERYTHING THAT I WANT , ALL I ASKED FOR WAS A SCHEMATIC... DOES IT MATTER
WETHER I HAVE PARTS OR NOT NO YOU NEWBIE.



"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:7caefvF263m23U1@mid.individual.net...
"mark krawczuk = crackpot "

you wanker have you ever thought taht i might have my own case and parts
u fukwit ?


** You did not claim to before and still are not claiming to have any.

So no - I did not and still do not think that.

So you are a congenital LIAR as well as a criminal psychopath.




..... Phil
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top