VXL PICK FROM SCHEMATIC'S SIZE PRAMATER PROBLEM

[ERIXLION]

Jean-Marc said:

Try setting CDS_Netlisting_Mode to Analog before launching the tool.

so I added a line into .bashrc:
export CDS_Netlisting_Mode=Analog

it works!!! now everything's working!!!

thanks man! you rock!


--
Message posted using http://www.talkaboutcad.com/group/comp.cad.cadence/
More information at http://www.talkaboutcad.com/faq.html

 

[Jean-Marc Bourguet]

fan gps <gpsfan@gmail.com> writes:

VXL PICK FROM SCHEMATIC'S SIZE PRAMATER PROBLEM


HI,
I just installed cadence 5.141 with VXL, everything works good, but
one thing, when I open a schematic , then VXL, then CREATE-->PICK FROM
SCHEMATIC, I got problem, I can only get a correct sized PMOS, NMOS,
but not other symbols, like inverter, nor2....when I pick them over to
VXL window, they just turn to be many standard PCELLs with minimum
size.

The parameters will be the one used in the inverter/nor2/... schematic.
I've just checked in a simple example, their are not the default.

--
Jean-Marc

 

[fan gps]

VXL PICK FROM SCHEMATIC'S SIZE PRAMATER PROBLEM


HI,
I just installed cadence 5.141 with VXL, everything works good, but
one thing, when I open a schematic , then VXL, then CREATE-->PICK FROM
SCHEMATIC, I got problem, I can only get a correct sized PMOS, NMOS,
but not other symbols, like inverter, nor2....when I pick them over to
VXL window, they just turn to be many standard PCELLs with minimum
size.

so I tried to setup CDF, I can use pick from schematic for other
symbols, but they are just the instances (not PCELL,and the instance's
size is not linked to the parameters what I set in schematic) of what
I built, I beleive I did some setting wrong on CDF,

what should I do to setup a correct PCELL size parameter link
schematic to VXL? or, what should I read? thanks.