Virtex XCV300 Board for sale on e-bay

[Hasan I.]

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2561068524&category=4663&rd=1

The board has:
* One Virtex XCV300-BG352 - 5 300k Gate FPGA
* 1 155MHz Crystal Oscilator
* 1 Linear Technology LT1580 (3.3V to 2.5V regulator)
* 1 Linear Technology LT1368
* 9 XEL123L LVPICL drivers
* JTAG interface for ease of programming
* High Density Connectorsw on the bottom side of the board for
easy access to the FPGA pins

 

[Farhad A]

This one is sold, there is anotherone at:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2563027892&category=4663&rd=1


Regards,
/Farhad A.
On Fri, 03 Oct 2003 02:25:35 GMT, Hasan I. <hahani@iri.net> wrote:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2561068524&category=4663&rd=1

The board has:
* One Virtex XCV300-BG352 - 5 300k Gate FPGA
* 1 155MHz Crystal Oscilator
* 1 Linear Technology LT1580 (3.3V to 2.5V regulator)
* 1 Linear Technology LT1368
* 9 XEL123L LVPICL drivers
* JTAG interface for ease of programming
* High Density Connectorsw on the bottom side of the board for
easy access to the FPGA pins

 

[Farhad A]

That one went really fast, this is the last one I have that I put on
e-bay:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2563076482&category=4663&rd=1

I will have new boards later this week with Altera EPM10k10, one 12
bits 125MHz A/D and 16 S&H analog inputs available later next week. I
am working on the schematic for those boards and testing them to make
sure they work properly.

Best regards,

/Farhad
On Sun, 05 Oct 2003 14:51:47 GMT, Farhad A
<farhad_abdolian@nospam.hotmail.com> wrote:

This one is sold, there is anotherone at:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2563027892&category=4663&rd=1


Regards,
/Farhad A.
On Fri, 03 Oct 2003 02:25:35 GMT, Hasan I. <hahani@iri.net> wrote:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2561068524&category=4663&rd=1

The board has:
* One Virtex XCV300-BG352 - 5 300k Gate FPGA
* 1 155MHz Crystal Oscilator
* 1 Linear Technology LT1580 (3.3V to 2.5V regulator)
* 1 Linear Technology LT1368
* 9 XEL123L LVPICL drivers
* JTAG interface for ease of programming
* High Density Connectorsw on the bottom side of the board for
easy access to the FPGA pins

 

[Hal Murray]

That one went really fast, this is the last one I have that I put on
e-bay:

I'm generally happy to hear about new boards and such, but I hope
you won't make a habbit of posting a message here every time
you put something up on ebay.

--
The suespammers.org mail server is located in California. So are all my
other mailboxes. Please do not send unsolicited bulk e-mail or unsolicited
commercial e-mail to my suespammers.org address or any of my other addresses.
These are my opinions, not necessarily my employer's. I hate spam.

 

[Antti Lukats]

hmurray@suespammers.org (Hal Murray) wrote in message news:<vo0u2l6d7v940e@corp.supernews.com>...

That one went really fast, this is the last one I have that I put on
e-bay:

I'm generally happy to hear about new boards and such, but I hope
you won't make a habbit of posting a message here every time
you put something up on ebay.

not to mention that the seller and group advertizer is actually lying
and selling the board with wrong advertizement information:

XCV300 is NOT supported by any free tools (except JBits 2.8)

ASFAIK. Or can somebody prove I am wrong?

antti