ViewSonic V775 monitor - only vert line in center

R

Rich

Guest
Hi All,

The picture on this monitor has shrunk to only a vertical line in the
center - about 1/4" wide. Prior to that, it would sometimes get
darker than normal, but brightness would return if I gave it a rest.

I can handle a component replacement, but outside of VOM have no other
instruments or service manual for this thing. Hate to thrash it,
since the picture was quite good, just before the failure. Any hints
?

Regards,

Rich
 
You would have to be able to troubleshoot the monitor for a failure in the
horizontal scanning. You can call Viewsonic to find their local service rep
for your area. With a proper estimate you can determine if you want to fix
the monitor. To service this you will need a lot more than a VOM and some
simple electronics knowledge.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"Rich" <rkoziol@lycos.com> wrote in message
news:gA2yb.347623$HS4.2933340@attbi_s01...
Hi All,

The picture on this monitor has shrunk to only a vertical line in the
center - about 1/4" wide. Prior to that, it would sometimes get
darker than normal, but brightness would return if I gave it a rest.

I can handle a component replacement, but outside of VOM have no other
instruments or service manual for this thing. Hate to thrash it,
since the picture was quite good, just before the failure. Any hints
?

Regards,

Rich
 
Thanks Jerry,

"Jerry G." <jerryg50@hotmail.com> wrote in message

You would have to be able to troubleshoot the monitor for a failure
in the
horizontal scanning.
Click to expand...
Is it possible to get the whole main board for monitors of that
vintage? Finding a bad component may be more than I can do, and too
much ($$) if someone else does it.

Regards,

Rich
 
Thanks Jerry,

"Jerry G." <jerryg50@hotmail.com> wrote in message

You would have to be able to troubleshoot the monitor for a failure
in the
horizontal scanning.
Click to expand...
Is it possible to get the whole main board for monitors of that
vintage? Finding a bad component may be more than I can do, and too
much ($$) if someone else does it.

Regards,

Rich
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top