Viewer for Gerber Photoplot File *.pho

P

Padraig FitzGerald

Guest
Hi,

I was wondering if anyone could reccomend a viewer for the above mentioned
file format? (preferrably free)

I have Orcad and GC-Prevue but neither of these semm to be up to the job,

regards

Padraig
 
"Padraig FitzGerald" <padraigfitz@SPAMeircom.net> wrote in message
news:32d431084fac3fd0db6fc255280ea859@news.teranews.com...
Hi,

I was wondering if anyone could reccomend a viewer for the above mentioned
file format? (preferrably free)

I have Orcad and GC-Prevue but neither of these semm to be up to the job,

regards

Padraig
Click to expand...
You could try ViewMate. I believe you get it from
http://www.pentalogix.com/, but I don't think the free version allows you to
make alterations and then save your work.
What's your limitation with GC-Prevue? It's always worked for me.
 
Thanks for that, It seems the limtation was with myself and not GC-Prevue,
I'm new to using it and had a couple of settings wrong, But it's working
now.


"G" <gpnomapson@hotmail.com> wrote in message
news:bl9cs1$9huqq$1@ID-154333.news.uni-berlin.de...
"Padraig FitzGerald" <padraigfitz@SPAMeircom.net> wrote in message
news:32d431084fac3fd0db6fc255280ea859@news.teranews.com...
Hi,

I was wondering if anyone could reccomend a viewer for the above
mentioned
file format? (preferrably free)

I have Orcad and GC-Prevue but neither of these semm to be up to the
job,

regards

Padraig


You could try ViewMate. I believe you get it from
http://www.pentalogix.com/, but I don't think the free version allows you
to
make alterations and then save your work.
What's your limitation with GC-Prevue? It's always worked for me.
Click to expand...
 
je crois que c est cela si mes souvenirs sont bons

dommage y a pas de notice pour l utilisation , mais j ai reussi a m en
servir

peut etre drl ou pho comme extension

http://www.designsystems.fi/downloads.htm

et c est tout en bas de la page --> **** ex2ger ****

peut etre en consultant l auteur

a noter je me sers aussi avec cela de gcprevue 8.12

ca permettait de mettre d une certaine maniere des trous noirs dans les
pastilles ( masi il y a ussi d autres combines avec gcprevue snas utiliser
cela )

salut Pierre


"G" <gpnomapson@hotmail.com> a écrit dans le message de
news:bl9cs1$9huqq$1@ID-154333.news.uni-berlin.de...
"Padraig FitzGerald" <padraigfitz@SPAMeircom.net> wrote in message
news:32d431084fac3fd0db6fc255280ea859@news.teranews.com...
Hi,

I was wondering if anyone could reccomend a viewer for the above
mentioned
file format? (preferrably free)

I have Orcad and GC-Prevue but neither of these semm to be up to the
job,

regards

Padraig


You could try ViewMate. I believe you get it from
http://www.pentalogix.com/, but I don't think the free version allows you
to
make alterations and then save your work.
What's your limitation with GC-Prevue? It's always worked for me.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top