VHF single channel NBFM RX

D

Dimmer

Guest
I wish to build a single channel NBFM receiver to operate around 149 MHz.
The XE1218 seems perfect but is a surface mount device. I wish to use a
pluggable DIL chip.

Is anyone aware of one or has any other suggestion, please?
 
On Thu, 11 Aug 2011 11:33:04 +1000, Dimmer wrote:

I wish to build a single channel NBFM receiver to operate around 149
MHz. The XE1218 seems perfect but is a surface mount device. I wish to
use a pluggable DIL chip.

Is anyone aware of one or has any other suggestion, please?
Click to expand...
MC13135 and MC13136 seem just fine and are available as DIL.
 
On Thu, 11 Aug 2011 11:33:04 +1000, "Dimmer" <Dimmer@Best.com> wrote:

I wish to build a single channel NBFM receiver to operate around 149 MHz.
The XE1218 seems perfect but is a surface mount device. I wish to use a
pluggable DIL chip.

Is anyone aware of one or has any other suggestion, please?
Click to expand...
ebay - used Tait T2010
 
Thanks very much for that. Those chips seem to need much more on the lines
of special supporting components than does the XE1218. I realise that I must
have a crystal (probably 3rd overtone) but any other ideas to minimise the
other specialist parts? Obviously R and C are no problem.

"asdf" <asdf@nospam.com> wrote in message
news:j1vr39$45b$1@speranza.aioe.org...
On Thu, 11 Aug 2011 11:33:04 +1000, Dimmer wrote:

I wish to build a single channel NBFM receiver to operate around 149
MHz. The XE1218 seems perfect but is a surface mount device. I wish to
use a pluggable DIL chip.

Is anyone aware of one or has any other suggestion, please?

MC13135 and MC13136 seem just fine and are available as DIL.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top