VCR question ...

[Arfa Daily]

Hi all

I just acquired a Toshiba model V726B VCR.

Can anyone tell me how I alter the UHF output channel, as it is currently
sitting right on top of one of my local channels, and completely wiping it
out. There is no obvious rear panel twiddler, and as the channel it is
currently outputting on is right up in the 60's, I guess it's probably a
programmed thing which you get at from some secret menu that I can't find.

If anyone can enlighten me, I'd be much obliged. Please mail me direct

monitech@freeuk.com

Thanks Geoff


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.528 / Virus Database: 324 - Release Date: 16/10/2003

 

[Sofie]

Use the factory remote control, get into the menu under setup, change the
output channel.
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
--------------------------------------


"Arfa Daily" <arfa.daily@ntlworld.com> wrote in message

I just acquired a Toshiba model V726B VCR.
Can anyone tell me how I alter the UHF output channel, as it is currently
sitting right on top of one of my local channels, and completely wiping it
out. There is no obvious rear panel twiddler, and as the channel it is
currently outputting on is right up in the 60's, I guess it's probably a
programmed thing which you get at from some secret menu that I can't find.
If anyone can enlighten me, I'd be much obliged. Please mail me direct
monitech@freeuk.com
Thanks Geoff

 

[Jim Adney]

On Tue, 21 Oct 2003 01:10:02 +0100 "Arfa Daily"
<arfa.daily@ntlworld.com> wrote:

I just acquired a Toshiba model V726B VCR.

Can anyone tell me how I alter the UHF output channel, as it is currently
sitting right on top of one of my local channels, and completely wiping it
out. There is no obvious rear panel twiddler, and as the channel it is
currently outputting on is right up in the 60's,

I didn't know that any VCRs had output in the UHF range. Isn't the
choice between channel 3 & 4 universal?

-
-----------------------------------------------
Jim Adney jadney@vwtype3.org
Madison, WI 53711 USA
-----------------------------------------------

 

[Sofie]

Jim Adney.....
This OP is in the UK...... this is a PAL VCR in the UK....... outputs in
the UHF channels.
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
-----------------------------


"Jim Adney" <jadney@vwtype3.org> wrote in message
news:i1obpvkutb2s6k05df0gihgrfrn4a938qc@4ax.com...

On Tue, 21 Oct 2003 01:10:02 +0100 "Arfa Daily"
arfa.daily@ntlworld.com> wrote:

I just acquired a Toshiba model V726B VCR.

Can anyone tell me how I alter the UHF output channel, as it is currently
sitting right on top of one of my local channels, and completely wiping
it
out. There is no obvious rear panel twiddler, and as the channel it is
currently outputting on is right up in the 60's,

I didn't know that any VCRs had output in the UHF range. Isn't the
choice between channel 3 & 4 universal?

-
-----------------------------------------------
Jim Adney jadney@vwtype3.org
Madison, WI 53711 USA
-----------------------------------------------