Valve Voltmeter

[Dan Allen]

Hiya,

hope this is the correct group for this question?

I have a Valve Volt Meter CT343, about 1970, J.S (NATO) Number
6625-99-943-6282

I've been trying to find a manual / circuit diag. for it, but can not
find any.
The main reason is that it does work, sort-of, but it doesn't seem to
display any voltage reading on the meter, only when set to 12v FSD,
with test leads unpluged, and in my hand do I get a FSD on the meter

Also I have a US Navy Frequancy Meter TS-186E/UP

if any one knows where I can find info for equipment like this please
let me know.

Location UK, all equipment is UK, execpt the Freq. meter which is US.
All equipment is Valve as well

cheers
--
Dan

 

[Watson A.Name \"Watt Sun]

Dan Allen wrote:

Hiya,

hope this is the correct group for this question?

I have a Valve Volt Meter CT343, about 1970, J.S (NATO) Number
6625-99-943-6282

I've been trying to find a manual / circuit diag. for it, but can not
find any.
The main reason is that it does work, sort-of, but it doesn't seem to
display any voltage reading on the meter, only when set to 12v FSD,
with test leads unpluged, and in my hand do I get a FSD on the meter

Also I have a US Navy Frequancy Meter TS-186E/UP

if any one knows where I can find info for equipment like this please
let me know.

Location UK, all equipment is UK, execpt the Freq. meter which is US.
All equipment is Valve as well

cheers

Try the Boat Anchor Manual Archive. http://bama.sbc.edu/

 

[Dan Allen]

On Fri, 07 May 2004 17:51:26 -0700, I was awakened by "Watson A.Name
\"Watt Sun - the Dark Remover\"" <NOSPAM@dslextreme.com> in
sci.electronics.equipment who caused me to spill hot coffee on my
keyboard by writing the following:

Dan Allen wrote:

Hiya,

hope this is the correct group for this question?

I have a Valve Volt Meter CT343, about 1970, J.S (NATO) Number
6625-99-943-6282

I've been trying to find a manual / circuit diag. for it, but can not
find any.
The main reason is that it does work, sort-of, but it doesn't seem to
display any voltage reading on the meter, only when set to 12v FSD,
with test leads unpluged, and in my hand do I get a FSD on the meter

Also I have a US Navy Frequancy Meter TS-186E/UP

if any one knows where I can find info for equipment like this please
let me know.

Location UK, all equipment is UK, execpt the Freq. meter which is US.
All equipment is Valve as well

cheers

Try the Boat Anchor Manual Archive. http://bama.sbc.edu/

OK,

I will try that...

Many Thanks

--
Dan