Using welder to jumpstart car, will try.

T

Tibur Waltson

Guest
Could I jump-start my Ford Escort with a 16VDC welder? Actually, the welder
is 32VAC, 100-amp, but if I hook up some diodes, maybe? Or maybe it's not a
good idea? But just hypothetically, would it work? I wake in the morning
with a dead battery and late for work. It's impossible to wait five hours
even on a strong charger. And I can strip the welder for parts. I might
consider getting a 100-amp charger/starter but maybe next paycheck? .Will it
work?
TIA
Tibur
 
"Tibur Waltson" <Toush@hi.com> wrote in message
news:2630afb9d8011ba1ca5fba0d6d3069a1@news.bubbanews.com...
Could I jump-start my Ford Escort with a 16VDC welder? Actually, the
welder
is 32VAC, 100-amp, but if I hook up some diodes, maybe? Or maybe it's not
a
good idea? But just hypothetically, would it work? I wake in the morning
with a dead battery and late for work. It's impossible to wait five hours
even on a strong charger. And I can strip the welder for parts. I might
consider getting a 100-amp charger/starter but maybe next paycheck? .Will
it
work?
TIA
Tibur
Click to expand...
Not recommended. ECU modules are quite fussy about the voltage they receive
and they are expensive!





 
In article <2630afb9d8011ba1ca5fba0d6d3069a1@news.bubbanews.com>,
Toush@hi.com says...

Could I jump-start my Ford Escort with a 16VDC welder? Actually, the welder
is 32VAC, 100-amp, but if I hook up some diodes, maybe? Or maybe it's not a
good idea? But just hypothetically, would it work? I wake in the morning
with a dead battery and late for work. It's impossible to wait five hours
even on a strong charger. And I can strip the welder for parts. I might
consider getting a 100-amp charger/starter but maybe next paycheck? .Will it
work?
Click to expand...
If your intention is to utterly fry your electrical system
(including your engine control computer), then yes, it will work
admirably well. Be standing by with a fire extinguisher, though, if you
want to salvage what will be left of your car.

If you have to jump-start, then use the proper equipment and
procedures. Welders are for welding, period.

--
Dr. Anton Squeegee, Director, Dutch Surrealist Plumbing Institute
(Known to some as Bruce Lane, KC7GR)
kyrrin a/t bluefeathertech d-o=t c&o&m
Motorola Radio Programming & Service Available -
http://www.bluefeathertech.com/rf.html
"Quando Omni Flunkus Moritati" (Red Green)
 
"Tibur Waltson" <Toush@hi.com> wrote in message
news:2630afb9d8011ba1ca5fba0d6d3069a1@news.bubbanews.com...
Could I jump-start my Ford Escort with a 16VDC welder? Actually, the
welder
is 32VAC, 100-amp, but if I hook up some diodes, maybe? Or maybe it's not
a
good idea? But just hypothetically, would it work? I wake in the morning
with a dead battery and late for work. It's impossible to wait five hours
even on a strong charger. And I can strip the welder for parts. I might
consider getting a 100-amp charger/starter but maybe next paycheck? .Will
it
work?
TIA
Tibur

A new battery will be a lot cheaper than a new car!!
Click to expand...
I think I smell smoke!
 
In article
<7qFGb.239488$Ec1.8396203@bgtnsc05-news.ops.worldnet.att.net>,
"Ross Mac" <this.is.a.mung@example.invalid> wrote:

"Tibur Waltson" <Toush@hi.com> wrote in message
news:2630afb9d8011ba1ca5fba0d6d3069a1@news.bubbanews.com...
Could I jump-start my Ford Escort with a 16VDC welder? Actually, the
welder
is 32VAC, 100-amp, but if I hook up some diodes, maybe? Or maybe it's not
a
good idea? But just hypothetically, would it work? I wake in the morning
with a dead battery and late for work. It's impossible to wait five hours
even on a strong charger. And I can strip the welder for parts. I might
consider getting a 100-amp charger/starter but maybe next paycheck? .Will
it
work?
TIA
Tibur

A new battery will be a lot cheaper than a new car!!
I think I smell smoke!
Click to expand...
Dunno about smoke, but I'm pretty sure I'm catching a whiff of troll...

--
Don Bruder - dakidd@sonic.net <--- Preferred Email - SpamAssassinated.
Hate SPAM? See <http://www.spamassassin.org> for some seriously great info.
I will choose a path that's clear: I will choose Free Will! - N. Peart
Fly trap info pages: <http://www.sonic.net/~dakidd/Horses/FlyTrap/index.html>
 
Each time a car battery goes dead it loses about half of its capacity...
So if its been dead several times a recharge won't help becasue it won't
hold the charge becasue its lost capacity..
Buy a new battery, Auto Zone will sell returns for about 1/2 price and
they're good!
Because they carry a guarantee..
good luck
hank wd5jfr
"Tibur Waltson" <Toush@hi.com> wrote in message
news:2630afb9d8011ba1ca5fba0d6d3069a1@news.bubbanews.com...
Could I jump-start my Ford Escort with a 16VDC welder? Actually, the
welder
is 32VAC, 100-amp, but if I hook up some diodes, maybe? Or maybe it's not
a
good idea? But just hypothetically, would it work? I wake in the morning
with a dead battery and late for work. It's impossible to wait five hours
even on a strong charger. And I can strip the welder for parts. I might
consider getting a 100-amp charger/starter but maybe next paycheck? .Will
it
work?
TIA
Tibur
Click to expand...
 
"Don Bruder"
"Ross Mac" wrote:
"Tibur Waltson"
Could I jump-start my Ford Escort with a 16VDC welder? Actually, the
welder
is 32VAC, 100-amp, but if I hook up some diodes, maybe? Or maybe it's
not
a
good idea? But just hypothetically, would it work? I wake in the
morning
with a dead battery and late for work. It's impossible to wait five
hours
even on a strong charger. And I can strip the welder for parts. I might
consider getting a 100-amp charger/starter but maybe next paycheck? .
Will it work?- Tibur

A new battery will be a lot cheaper than a new car!!
I think I smell smoke!

Dunno about smoke, but I'm pretty sure I'm catching a whiff of troll...
Click to expand...
Well, yeah, ..but I have three cars that says "DO NOT SUPPLY MORE THAN 18V,
Or your electronics will be DAMAGED." stuck to the hood. That means 16V is
still 2 volts less than the danger zone. Well, anyway considering what most
of you said, I ought to go and get a real equipment designed for it since car
computers aren't cheep.
 
"Don Bruder" <dakidd@sonic.net> wrote in message
news:FTFGb.4928$XF6.108274@typhoon.sonic.net...
In article
7qFGb.239488$Ec1.8396203@bgtnsc05-news.ops.worldnet.att.net>,
"Ross Mac" <this.is.a.mung@example.invalid> wrote:

"Tibur Waltson" <Toush@hi.com> wrote in message
news:2630afb9d8011ba1ca5fba0d6d3069a1@news.bubbanews.com...
Could I jump-start my Ford Escort with a 16VDC welder? Actually, the
welder
is 32VAC, 100-amp, but if I hook up some diodes, maybe? Or maybe it's
not
a
good idea? But just hypothetically, would it work? I wake in the
morning
with a dead battery and late for work. It's impossible to wait five
hours
even on a strong charger. And I can strip the welder for parts. I
might
consider getting a 100-amp charger/starter but maybe next paycheck?
..Will
it
work?
TIA
Tibur

A new battery will be a lot cheaper than a new car!!
I think I smell smoke!



Dunno about smoke, but I'm pretty sure I'm catching a whiff of troll...

--
Don Bruder - dakidd@sonic.net <--- Preferred Email - SpamAssassinated.
Hate SPAM? See <http://www.spamassassin.org> for some seriously great
info.
I will choose a path that's clear: I will choose Free Will! - N. Peart
Fly trap info pages:
http://www.sonic.net/~dakidd/Horses/FlyTrap/index.html
Click to expand...

No flame here, Don!.....That is unless that Escort gets 20 volts or so!
 
Could I jump-start my Ford Escort with a 16VDC welder?
Actually, the welder is 32VAC, 100-amp...diodes ?
Tibur Waltson

If your intention is to utterly fry your electrical system
(including your engine control computer), then yes
...fire extinguisher
Dr. A.T. Squeegee
Click to expand...
I don't know about Escorts, but one thing I liked about Fords in the past
was the way they mounted the starter solenoid up on the fender well.

In theory, if you disconnected the large-gauge wire which goes to the starter,
you could connect the external source to that wire.
If the battery had enough oomph to pull in the solenoid and run the ignition,
you could start the car without any risk of excessive voltage
running through the rest of the electrical system.
 
"JeffM" <jeffm_@email.com> wrote in message
news:f8b945bc.0312281239.2ac3c207@posting.google.com...
Could I jump-start my Ford Escort with a 16VDC welder?
Actually, the welder is 32VAC, 100-amp...diodes ?
Tibur Waltson

If your intention is to utterly fry your electrical system
(including your engine control computer), then yes
...fire extinguisher
Dr. A.T. Squeegee

I don't know about Escorts, but one thing I liked about Fords in the past
was the way they mounted the starter solenoid up on the fender well.

In theory, if you disconnected the large-gauge wire which goes to the
starter,
you could connect the external source to that wire.
If the battery had enough oomph to pull in the solenoid and run the
ignition,
you could start the car without any risk of excessive voltage
running through the rest of the electrical system.
Click to expand...
That solenoid up top, like they used to do it some years ago, sure made them
easy to hotwire too!
 
"JeffM"
Could I jump-start my Ford Escort with a 16VDC welder?
Actually, the welder is 32VAC, 100-amp...diodes ?
Tibur Waltson

If your intention is to utterly fry your electrical system
(including your engine control computer), then yes
...fire extinguisher
Dr. A.T. Squeegee

I don't know about Escorts, but one thing I liked about Fords in the past
was the way they mounted the starter solenoid up on the fender well.

In theory, if you disconnected the large-gauge wire which goes to the
you could connect the external source to that wire.
If the battery had enough oomph to pull in the solenoid and run the
you could start the car without any risk of excessive voltage
running through the rest of the electrical system.
Click to expand...
Wow, okay, I'll try using some alternator diodes if that's alright. Let's
see what happens. Thanks.
Tibur
 
...if you disconnected the large-gauge wire which goes to the starter
you could connect the external source to that wire.
JeffM

I'll try using some alternator diodes if that's alright.
Tibur Waltson
Click to expand...
Alternators are rated < 42 amps.
Starters can pull > 100 amps.
 
In article <f8b945bc.0312302206.340bbaa4@posting.google.com>,
jeffm_@email.com says...
...if you disconnected the large-gauge wire which goes to the starter
you could connect the external source to that wire.
JeffM

I'll try using some alternator diodes if that's alright.
Tibur Waltson

Alternators are rated < 42 amps.
Click to expand...
Continuously, and many automotive alternators are well above
this. 60A+ isn't unusual and 100A isn't unheard of.

Starters can pull > 100 amps.
Click to expand...
Intermittently. 60A diodes shouldn't spontaneously combust after
a few seconds of 100% overload.

--
Keith
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top