Z
Zhiheng Cao
Guest
Dear Cadence,
I could not find information on how to assign pins in the symbol, and
how to set parameters required by the spectreHDL module.
When I tried just giving pins the same name as the argument,
I got errors:
Running Artist Hierarchical Netlisting ...
\o ERROR: Netlister: unable to descend into any of the views defined in the
view
list: "spectreS spice cmos_sch cmos.sch schematic veriloga ahdl" for
instance I
22 in cell dsm.
\o Either add one of these views to: Library: DSM25 Cell: logger or modify
the v
iew list to contain an existing view.
\o End netlisting Feb 9 21:50:31 2005
\o "Netlister: There were errors, no netlist was produced."
"logger" is a cell containing "ahdl" and "symbol", when I open the ahdl
view, I can see my SpectreHDL code, where a module named "logger"
is defined.
Thanks,
Cao
I could not find information on how to assign pins in the symbol, and
how to set parameters required by the spectreHDL module.
When I tried just giving pins the same name as the argument,
I got errors:
Running Artist Hierarchical Netlisting ...
\o ERROR: Netlister: unable to descend into any of the views defined in the
view
list: "spectreS spice cmos_sch cmos.sch schematic veriloga ahdl" for
instance I
22 in cell dsm.
\o Either add one of these views to: Library: DSM25 Cell: logger or modify
the v
iew list to contain an existing view.
\o End netlisting Feb 9 21:50:31 2005
\o "Netlister: There were errors, no netlist was produced."
"logger" is a cell containing "ahdl" and "symbol", when I open the ahdl
view, I can see my SpectreHDL code, where a module named "logger"
is defined.
Thanks,
Cao