usb Parallel converter...

S

server

Guest
If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and 2007 computers.)

--
Vasos Panagiotopoulos, Columbia\'81+, Reagan, Mozart, Pindus
blog: panix.com/~vjp2/ruminatn.htm - = - web: panix.com/~vjp2/vasos.htm
facebook.com/vasjpan2 - linkedin.com/in/vasjpan02 - biostrategist.com
---{Nothing herein constitutes advice. Everything fully disclaimed.}---
 
In article <s7r85h$s2s$1@reader1.panix.com>,
vjp2.at@at.BioStrategist.dot.dot.com says...
Newsgroups: sci.electronics.repair
Subject: Re: usb Parallel converter
From: vjp2.at@at.BioStrategist.dot.dot.com



Basically my question is if the usb-prl converter works both ways.

Or how do I know if it does.
Click to expand...

Well, if you \"acquired\" an old scanner that had a parallel interface, if
it worked it must be two-way!
 
In article <s7r85h$s2s$1@reader1.panix.com>,
vjp2.at@at.BioStrategist.dot.dot.com says...
Newsgroups: sci.electronics.repair
Subject: Re: usb Parallel converter
From: vjp2.at@at.BioStrategist.dot.dot.com



Basically my question is if the usb-prl converter works both ways.

Or how do I know if it does.
Click to expand...

Well, if you \"acquired\" an old scanner that had a parallel interface, if
it worked it must be two-way!
 
vjp2.at@at.BioStrategist.dot.dot.com <vjp2.at@at.BioStrategist.dot.dot.com> wrote:
If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and 2007 computers.)
Click to expand...

No, that will not work!
 
On Friday, May 14, 2021 at 6:43:59 AM UTC-4, Rob wrote:
vjp...@at.BioStrategist.dot.dot.com <vjp...@at.BioStrategist.dot.dot.com> wrote:
If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and 2007 computers.)
No, that will not work!
Click to expand...

So, you have USB on a computer, and parallel on a printer, and you have a converter to connect them?

Now you want to get rid of the parallel printer and buy a USB printer? No, your converter won\'t work, but you won\'t need it anymore. You can go USB to USB.

Maybe I misunderstood what you are asking.
 
vjp2.at@at.BioStrategist.dot.dot.com <vjp2.at@at.BioStrategist.dot.dot.com> wrote:
If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and 2007 computers.)
Click to expand...

No, that will not work!
 
Tim R <timothy42b@aol.com> wrote:
On Friday, May 14, 2021 at 6:43:59 AM UTC-4, Rob wrote:
vjp...@at.BioStrategist.dot.dot.com <vjp...@at.BioStrategist.dot.dot.com> wrote:
If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and 2007 computers.)
No, that will not work!

So, you have USB on a computer, and parallel on a printer, and you have a converter to connect them?

Now you want to get rid of the parallel printer and buy a USB printer? No, your converter won\'t work, but you won\'t need it anymore. You can go USB to USB.

Maybe I misunderstood what you are asking.
Click to expand...

I have not asked anything, but I have read what the OP asked and understood
that he has a computer with parallel interface, and a printer with USB
interface, and is looking for a gadget to connect the two.

However, a \"USB to parallel printer\" converter (cable) will not do that,
it converts the other way around (USB computer to parallel printer).
 
Tim R <timothy42b@aol.com> wrote:
On Friday, May 14, 2021 at 6:43:59 AM UTC-4, Rob wrote:
vjp...@at.BioStrategist.dot.dot.com <vjp...@at.BioStrategist.dot.dot.com> wrote:
If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and 2007 computers.)
No, that will not work!

So, you have USB on a computer, and parallel on a printer, and you have a converter to connect them?

Now you want to get rid of the parallel printer and buy a USB printer? No, your converter won\'t work, but you won\'t need it anymore. You can go USB to USB.

Maybe I misunderstood what you are asking.
Click to expand...

I have not asked anything, but I have read what the OP asked and understood
that he has a computer with parallel interface, and a printer with USB
interface, and is looking for a gadget to connect the two.

However, a \"USB to parallel printer\" converter (cable) will not do that,
it converts the other way around (USB computer to parallel printer).
 
In article <s7lhg0$oen$1@reader1.panix.com>,
vjp2.at@at.BioStrategist.dot.dot.com says...
If I have a converter between a USB computer and a parallel printer,
will it also work between a usb printer and parallel computer?
Click to expand...

No, these are only designed for one-way conversion. I\'m not aware of any
that are bi-directional.

(I want to replace 1995 printer which is connected to 1995 and 2007
computers.)
Click to expand...

If you want to get a USB printer working on a computer with no USB
ports, I think your options are:

- Add USB ports to your computer by installing a USB expansion card that
fits in an ISA or PCI slot. However, you will need to check if suitable
printer drivers are available for the operating system on your older
computer, otherwise the new printer may still not be recognised. Also,
some older operating systems may not support USB at all.

- Buy a parallel-computer-to-USB-printer converter. These do exist, but
are rather specialist and expensive. Try https://www.lpt2usb.net/ or
https://www.retroprinter.com/ (I have not tried either of these devices,
so cannot say how well they work).

It may be easier to keep a parallel printer for use with the parallel-
only computer.

R
 
In article <s7lhg0$oen$1@reader1.panix.com>,
vjp2.at@at.BioStrategist.dot.dot.com says...
If I have a converter between a USB computer and a parallel printer,
will it also work between a usb printer and parallel computer?
Click to expand...

No, these are only designed for one-way conversion. I\'m not aware of any
that are bi-directional.

(I want to replace 1995 printer which is connected to 1995 and 2007
computers.)
Click to expand...

If you want to get a USB printer working on a computer with no USB
ports, I think your options are:

- Add USB ports to your computer by installing a USB expansion card that
fits in an ISA or PCI slot. However, you will need to check if suitable
printer drivers are available for the operating system on your older
computer, otherwise the new printer may still not be recognised. Also,
some older operating systems may not support USB at all.

- Buy a parallel-computer-to-USB-printer converter. These do exist, but
are rather specialist and expensive. Try https://www.lpt2usb.net/ or
https://www.retroprinter.com/ (I have not tried either of these devices,
so cannot say how well they work).

It may be easier to keep a parallel printer for use with the parallel-
only computer.

R
 
vjp2.at@at.BioStrategist.dot.dot.com wrote:
If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and
2007 computers.)
Click to expand...
Does your PC have a RJ45 Ethernet connector? In that case you can
connect a RaspberryPi, install Raspbian on it and CUPS and connect
your USB-printer to the RPi. By that way you can print via network.

Kind regards, Eike
 
vjp2.at@at.BioStrategist.dot.dot.com wrote:
If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and
2007 computers.)
Click to expand...
Does your PC have a RJ45 Ethernet connector? In that case you can
connect a RaspberryPi, install Raspbian on it and CUPS and connect
your USB-printer to the RPi. By that way you can print via network.

Kind regards, Eike
 
On 5/14/2021 9:23 AM, Rob wrote:
Tim R<timothy42b@aol.com> wrote:
On Friday, May 14, 2021 at 6:43:59 AM UTC-4, Rob wrote:
vjp...@at.BioStrategist.dot.dot.com<vjp...@at.BioStrategist.dot.dot.com> wrote:
If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and 2007 computers.)
No, that will not work!

So, you have USB on a computer, and parallel on a printer, and you have a converter to connect them?

Now you want to get rid of the parallel printer and buy a USB printer? No, your converter won\'t work, but you won\'t need it anymore. You can go USB to USB.

Maybe I misunderstood what you are asking.

I have not asked anything, but I have read what the OP asked and understood
that he has a computer with parallel interface, and a printer with USB
interface, and is looking for a gadget to connect the two.

However, a \"USB to parallel printer\" converter (cable) will not do that,
it converts the other way around (USB computer to parallel printer).
Click to expand...

Yes, it seems that he wants to connect a new USB printer to a parallel
printer port on said 1995 computer. Even if possible, the computer
won\'t recognize the new printer... good luck finding drivers for that
machine, likely running Win 3.11 or 95.
 
In sci.electronics.repair, Michael Trew <mt999999@ymail.com> wrote:
vjp...@at.BioStrategist.dot.dot.com<vjp...@at.BioStrategist.dot.dot.com
wrote:
(I want to replace 1995 printer which is connected to 1995 and 2007
computers.)
[...]
Yes, it seems that he wants to connect a new USB printer to a parallel
printer port on said 1995 computer. Even if possible, the computer
Click to expand...

Read again. Several computers oldest of which is 1995.

won\'t recognize the new printer... good luck finding drivers for that
machine, likely running Win 3.11 or 95.
Click to expand...

Generic PCL or Postscript will work fine with older computers. Also
Epson compatible line printing. I have seen VJP ask about XP and Linux
issues. I venture there are modern Linux distributions that can still
run on 1995 hardware.

Using network printing, possibly with a pi as a server, and generic PCL
/ Postscript is probably easiest for OSes of that era.

Elijah
------
first used network printing in 1991
 
In sci.electronics.repair, Michael Trew <mt999999@ymail.com> wrote:
vjp...@at.BioStrategist.dot.dot.com<vjp...@at.BioStrategist.dot.dot.com
wrote:
(I want to replace 1995 printer which is connected to 1995 and 2007
computers.)
[...]
Yes, it seems that he wants to connect a new USB printer to a parallel
printer port on said 1995 computer. Even if possible, the computer
Click to expand...

Read again. Several computers oldest of which is 1995.

won\'t recognize the new printer... good luck finding drivers for that
machine, likely running Win 3.11 or 95.
Click to expand...

Generic PCL or Postscript will work fine with older computers. Also
Epson compatible line printing. I have seen VJP ask about XP and Linux
issues. I venture there are modern Linux distributions that can still
run on 1995 hardware.

Using network printing, possibly with a pi as a server, and generic PCL
/ Postscript is probably easiest for OSes of that era.

Elijah
------
first used network printing in 1991
 
Eli the Bearded <*@eli.users.panix.com> wrote:
In sci.electronics.repair, Michael Trew <mt999999@ymail.com> wrote:
vjp...@at.BioStrategist.dot.dot.com<vjp...@at.BioStrategist.dot.dot.com
wrote:
(I want to replace 1995 printer which is connected to 1995 and 2007
computers.)
[...]
Yes, it seems that he wants to connect a new USB printer to a parallel
printer port on said 1995 computer. Even if possible, the computer

Read again. Several computers oldest of which is 1995.

won\'t recognize the new printer... good luck finding drivers for that
machine, likely running Win 3.11 or 95.

Generic PCL or Postscript will work fine with older computers. Also
Epson compatible line printing. I have seen VJP ask about XP and Linux
issues. I venture there are modern Linux distributions that can still
run on 1995 hardware.

Using network printing, possibly with a pi as a server, and generic PCL
/ Postscript is probably easiest for OSes of that era.

Elijah
------
first used network printing in 1991
Click to expand...

Of course it depends a lot on the printer. I have never bought \"toy
printers\" so I have no personal experience with that, I always used
printers that supported Postscript or well-recognized other standards.
However, I know that printers have existed (especially on USB) which
do not support any printer language and can only print a bitmap sent
to them in a proprietary protocol. The Windows driver that comes
with it does all the rendering on the computer then sends the prepared
pages to the printer.
No idea how common that still is.

A \"red flag\" is \"only drivers for Windows available for the printer\".
 
On Sat, 15 May 2021 00:39:33 +0000 (UTC), Eli the Bearded wrote:
In sci.electronics.repair, Michael Trew <mt999999@ymail.com> wrote:
vjp...@at.BioStrategist.dot.dot.com<vjp...@at.BioStrategist.dot.dot.com
wrote:
(I want to replace 1995 printer which is connected to 1995 and 2007
computers.)
[...]
Yes, it seems that he wants to connect a new USB printer to a parallel
printer port on said 1995 computer. Even if possible, the computer

Read again. Several computers oldest of which is 1995.

won\'t recognize the new printer... good luck finding drivers for that
machine, likely running Win 3.11 or 95.

Generic PCL or Postscript will work fine with older computers. Also
Epson compatible line printing. I have seen VJP ask about XP and Linux
issues. I venture there are modern Linux distributions that can still
run on 1995 hardware.
Click to expand...

heh... Just for grins, and some actual, but seldom needed use, I have
WordStar 6.0 running in xdosemu on my linux workstation. It prints
Just Fine to my lan connected HP Jetpro M404n, even tho\' WordStar \"thinks\"
it\'s still printing on my long gone HP LJ III.

Jonesy
--
Marvin L Jones | Marvin | W3DHJ.net | linux
38.238N 104.547W | @ jonz.net | Jonesy | FreeBSD
* Killfiling google & XXXXbanter.com: jonz.net/ng.htm
 
On Sat, 15 May 2021 00:39:33 +0000 (UTC), Eli the Bearded wrote:
In sci.electronics.repair, Michael Trew <mt999999@ymail.com> wrote:
vjp...@at.BioStrategist.dot.dot.com<vjp...@at.BioStrategist.dot.dot.com
wrote:
(I want to replace 1995 printer which is connected to 1995 and 2007
computers.)
[...]
Yes, it seems that he wants to connect a new USB printer to a parallel
printer port on said 1995 computer. Even if possible, the computer

Read again. Several computers oldest of which is 1995.

won\'t recognize the new printer... good luck finding drivers for that
machine, likely running Win 3.11 or 95.

Generic PCL or Postscript will work fine with older computers. Also
Epson compatible line printing. I have seen VJP ask about XP and Linux
issues. I venture there are modern Linux distributions that can still
run on 1995 hardware.
Click to expand...

heh... Just for grins, and some actual, but seldom needed use, I have
WordStar 6.0 running in xdosemu on my linux workstation. It prints
Just Fine to my lan connected HP Jetpro M404n, even tho\' WordStar \"thinks\"
it\'s still printing on my long gone HP LJ III.

Jonesy
--
Marvin L Jones | Marvin | W3DHJ.net | linux
38.238N 104.547W | @ jonz.net | Jonesy | FreeBSD
* Killfiling google & XXXXbanter.com: jonz.net/ng.htm
 
On Fri, 14 May 2021 09:56:16 +0000 (UTC),
vjp2.at@at.BioStrategist.dot.dot.com wrote:

If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and 2007 computers.)
Click to expand...

You probably won\'t need a converter as will almost certainly be USB to
USB.

Steve

--
http://www.npsnn.com
 
On Fri, 14 May 2021 09:56:16 +0000 (UTC),
vjp2.at@at.BioStrategist.dot.dot.com wrote:

If I have a converter between a USB computer and a parallel printer, will it
also work between a usb printer and parallel computer?

(I want to replace 1995 printer which is connected to 1995 and 2007 computers.)
Click to expand...

You probably won\'t need a converter as will almost certainly be USB to
USB.

Steve

--
http://www.npsnn.com
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top