USB Cables again

L

luudee

Guest
It seems this issue is coming up again and again, with each new ISE
release.

I am running Fedora 14, x86_64, and installed ISE 12.4.

And of course the platform USB cables stopped working ...

libusb is installed, and the drivers are installed ....

but impact is giving me this:
........
AutoDetecting cable. Please wait.
If you are using the Platform Cable USB, please refer to the USB Cable
Installation Guide (UG344) to install the libusb package.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the
cable
drivers. See Answer Record 22648.
Cable connection failed.
Connecting to cable (Parallel Port - parport0).
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the
cable
drivers. See Answer Record 22648.
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module parport_pc is not loaded. Please reinstall
the cable
drivers. See Answer Record 22648.
Cable connection failed.


Any ideas or suggestions ???

Thanks,
rudi
 
On 01/01/11 19:26, luudee wrote:
It seems this issue is coming up again and again, with each new ISE
release.

I am running Fedora 14, x86_64, and installed ISE 12.4.

And of course the platform USB cables stopped working ...

libusb is installed, and the drivers are installed ....

but impact is giving me this:
........
AutoDetecting cable. Please wait.
If you are using the Platform Cable USB, please refer to the USB Cable
Installation Guide (UG344) to install the libusb package.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the
cable
drivers. See Answer Record 22648.
Cable connection failed.
Connecting to cable (Parallel Port - parport0).
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the
cable
drivers. See Answer Record 22648.
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module parport_pc is not loaded. Please reinstall
the cable
drivers. See Answer Record 22648.
Cable connection failed.
Click to expand...
does fxload load the firmware? check lsusb for Product-ID 0008. The
"tempnode" string in the udev-rules is case sensitive. Can't remember if
upper or lower case is correct, but I had to change it once.

Do you have the symlink /usr/lib/libusb.so -> /usr/lib/libusb-[Version].so
This link was not created by default in my distribution and caused
problems in previous releases(don't know about fedora)

HTH
 
he wrote:
On 01/01/11 19:26, luudee wrote:
It seems this issue is coming up again and again, with each new ISE
release.

I am running Fedora 14, x86_64, and installed ISE 12.4.

And of course the platform USB cables stopped working ...

libusb is installed, and the drivers are installed ....

but impact is giving me this:
........
AutoDetecting cable. Please wait.
If you are using the Platform Cable USB, please refer to the USB Cable
Installation Guide (UG344) to install the libusb package.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the
cable
drivers. See Answer Record 22648.
Cable connection failed.
Connecting to cable (Parallel Port - parport0).
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the
cable
drivers. See Answer Record 22648.
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module parport_pc is not loaded. Please reinstall
the cable
drivers. See Answer Record 22648.
Cable connection failed.

does fxload load the firmware? check lsusb for Product-ID 0008. The
"tempnode" string in the udev-rules is case sensitive. Can't remember if
upper or lower case is correct, but I had to change it once.

Do you have the symlink /usr/lib/libusb.so -> /usr/lib/libusb-[Version].so
This link was not created by default in my distribution and caused
problems in previous releases(don't know about fedora)

HTH
Click to expand...
Update: ISE_DS 12.4 now searches for libusb.so in /usr/lib64 instead of
/usr/lib on 64bit machines.
-> Create a symlink /usr/lib64/libusb.so ->
/usr/lib64/libusb-[version].so and 12.4 detects the cable:


Release 12.4 - iMPACT M.81d (lin64)
Copyright (c) 1995-2010 Xilinx, Inc. All rights reserved.
Preference Table
Name Setting
StartupClock Auto_Correction
AutoSignature False
KeepSVF False
ConcurrentMode False
UseHighz False
ConfigOnFailure Stop
UserLevel Novice
MessageLevel Detailed
svfUseTime false
SpiByteSwap Auto_Correction
AutoInfer false
SvfPlayDisplayComments false
AutoDetecting cable. Please wait.
Connecting to cable (Usb Port - USB21).
Click to expand...
Checking cable driver.
File version of /opt/Xilinx/12.4/ISE_DS/ISE/bin/lin64/xusbdfwu.hex = 1030.
File version of /usr/share/xusbdfwu.hex = 1030.
Using libusb.
Kernel release = 2.6.18-194.26.1.el5.
Max current requested during enumeration is 74 mA.
Type = 0x0004.
Cable Type = 3, Revision = 0.
Setting cable speed to 6 MHz.
Cable connection established.
Firmware version = 1028.
File version of /opt/Xilinx/12.4/ISE_DS/ISE/data/xusb_xlp.hex = 1303.
Firmware hex file version = 1303.
Downloading /opt/Xilinx/12.4/ISE_DS/ISE/data/xusb_xlp.hex.
Downloaded firmware version = 1303.
PLD file version = 0012h.
PLD version = 0012h.
Type = 0x0004.
ESN option: 000013C1E1DF01.
Identifying chain contents...'0': : Manufacturer's ID = Xilinx
xc6vlx240t, Version : 2
Click to expand...
INFO:iMPACT:1777 -
Reading /opt/Xilinx/12.4/ISE_DS/ISE/virtex6/data/xc6vlx240t.bsd...
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'1': : Manufacturer's ID = Xilinx xccace, Version : 0
INFO:iMPACT:1777 -
Reading /opt/Xilinx/12.4/ISE_DS/ISE/acecf/data/xccace.bsd...
INFO:iMPACT:501 - '1': Added Device xccace successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Elapsed time = 1 sec.
Elapsed time = 0 sec.
----------------------------------------------------------------------
----------------------------------------------------------------------
Click to expand...
 
use strace to check where impact searches libusb.so (e.g. /lib or /lib64)
you may also need to create symlinks from libusb-[version].so to
libusb.so because the Xilinx tools only search for the libusb.so
(without version).

HTH
rndhro


On 10/22/2012 01:58 PM, adnan.kuleta@gmail.com wrote:
On Saturday, January 1, 2011 7:26:57 PM UTC+1, luudee wrote:
It seems this issue is coming up again and again, with each new ISE
release.

I am running Fedora 14, x86_64, and installed ISE 12.4.

And of course the platform USB cables stopped working ...

libusb is installed, and the drivers are installed ....

but impact is giving me this:
.......
AutoDetecting cable. Please wait.
If you are using the Platform Cable USB, please refer to the USB Cable
Installation Guide (UG344) to install the libusb package.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the
cable
drivers. See Answer Record 22648.
Cable connection failed.
Connecting to cable (Parallel Port - parport0).
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the
cable
drivers. See Answer Record 22648.
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module parport_pc is not loaded. Please reinstall
the cable
drivers. See Answer Record 22648.
Cable connection failed.


Any ideas or suggestions ???

Thanks,
rudi

HI,
System recognises th USB , and but whenever a want to do Cable AutoConnect it comes

WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
Click to expand...
 
On Saturday, January 1, 2011 7:26:57 PM UTC+1, luudee wrote:
It seems this issue is coming up again and again, with each new ISE
release.

I am running Fedora 14, x86_64, and installed ISE 12.4.

And of course the platform USB cables stopped working ...

libusb is installed, and the drivers are installed ....

but impact is giving me this:
.......
AutoDetecting cable. Please wait.
If you are using the Platform Cable USB, please refer to the USB Cable
Installation Guide (UG344) to install the libusb package.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the
cable
drivers. See Answer Record 22648.
Cable connection failed.
Connecting to cable (Parallel Port - parport0).
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the
cable
drivers. See Answer Record 22648.
Linux release = 2.6.36.2.RU1.
WARNING:iMPACT - Module parport_pc is not loaded. Please reinstall
the cable
drivers. See Answer Record 22648.
Cable connection failed.


Any ideas or suggestions ???

Thanks,
rudi
Click to expand...
HI,
System recognises th USB , and but whenever a want to do Cable AutoConnect it comes

WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top