A
anon
Guest
I appreciate the input by everyone in the group.
I intended to use a three step approach this morning. I cooled the hdd in
the fridge for an hour and was successful in removing the screw.
If that had not worked I would have tried heating the screw with a soldering
iron. My next step would have been using the dremel.
I also like the epoxy idea and will try that process on a few junk drives I
have in my inventory.
Thanks guys.
I have noticed this is one of the better NG's - generally helpful and not
full of spam or the b.s that appears in many other groups.
Dave
I intended to use a three step approach this morning. I cooled the hdd in
the fridge for an hour and was successful in removing the screw.
If that had not worked I would have tried heating the screw with a soldering
iron. My next step would have been using the dremel.
I also like the epoxy idea and will try that process on a few junk drives I
have in my inventory.
Thanks guys.
I have noticed this is one of the better NG's - generally helpful and not
full of spam or the b.s that appears in many other groups.
Dave