Guest
Greetings to all !
I started programming with VHDL two months ago. Now I want to implement
a project on a Spartan 3 (XC3S50 VQ100). The software I´m using is the
ISE Webpack 8.2.03i (Application Version: I.34).
This project is later supposed to be a bit error testing instance in
combination with an Microcontroller that is used to read out an compare
the sended and received data from the block RAMs of the Spartan 3.
I tested the components I used as standalone-designs and they all seem
to function but when I try to make one pice of all designs the FPGA
doesn´t show any expected behaviour at all-even some simple LED I
integrated in the design to indicate if the clock is active don't start
flashing.
Although i know it's probably not the smartest way to ask for help but
as I need this project to function for my thesis i have no other ideas
than posting the whole code - any words are very appreciated (the
comments are in german and not so important)!!!
p.s.: It would also help if someone would just copy and paste this code
into a new projektfile to find out if it´s running(simplest
indication: the State LED_Z0 should be on and the LED_Z1 should be
flashing) on his hardware.
#UCF - File :
****************************************************************************************************
NET "CLK_IN" LOC = "P36" | IOSTANDARD = LVTTL ; #Takt vom
Meltemi-Board (66 MHz)
NET "CLK_fromMC" LOC = "P39" | IOSTANDARD = LVTTL ;#Takt com MC
NET "DATA_toMC<0>" LOC = "P30" | IOSTANDARD = LVTTL
;#Datenleitungen
NET "DATA_toMC<1>" LOC = "P32" | IOSTANDARD = LVTTL ;
NET "DATA_toMC<2>" LOC = "P34" | IOSTANDARD = LVTTL ;
NET "DATA_toMC<3>" LOC = "P35" | IOSTANDARD = LVTTL ;
NET "MC_READY" LOC = "P43" | IOSTANDARD = LVTTL ;#MC ist fertig mit
Auslesen
NET "MC_READ" LOC = "P44" | IOSTANDARD = LVTTL ;#MC soll mit Auslesen
beginnen
NET "INDICATION_MUXtoMC<1>" LOC = "P47" | IOSTANDARD = LVTTL ;
NET "INDICATION_MUXtoMC<0>" LOC = "P59" | IOSTANDARD = LVTTL ;
NET "LED_Z0" LOC = "P72" | IOSTANDARD = LVTTL ;
NET "LED_Z1" LOC = "P50" | IOSTANDARD = LVTTL ;
NET "LED_Z2" LOC = "P55" | IOSTANDARD = LVTTL ;
###############LVDS-Kanäle###############################
NET "LVDS_Nr" LOC = "P88" | IOSTANDARD = LVDSEXT_25 ;#r: receive
NET "LVDS_Ns" LOC = "P90" | IOSTANDARD = LVDSEXT_25 ;#s: send
NET "LVDS_Pr" LOC = "P87" | IOSTANDARD = LVDSEXT_25 ;
NET "LVDS_Ps" LOC = "P89" | IOSTANDARD = LVDSEXT_25 ;
################TASTER####################################
NET "BUTTON" LOC = "P21" | IOSTANDARD = LVTTL ;#USERSTART
--Topmodule -File:
**********************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity TOPMODULE is
generic(
WAIT_WIDTH_USERSTART : positive := 28;
WAIT_WIDTH_MC_READY : positive := 10;
CNT_WIDTH : positive := 25
);
Port ( CLK_IN : in STD_LOGIC;
MC_READY : in STD_LOGIC;
BUTTON : in std_logic;
LVDS_Pr : in STD_LOGIC; --receive
LVDS_Nr : in STD_LOGIC;
LVDS_Ps : out STD_LOGIC;--send
LVDS_Ns : out STD_LOGIC;
LED_Z0 : out STD_LOGIC;
LED_Z1 : out STD_LOGIC;
LED_Z2 : out STD_LOGIC;
DATA_toMC : out STD_LOGIC_VECTOR (3 downto 0);
MC_READ : out STD_LOGIC;
CLK_fromMC : in std_logic;
INDICATION_MUXtoMC : out std_logic_vector(1 downto 0)
);
end TOPMODULE;
architecture Behavioral of TOPMODULE is
component STATE_MACHINE
port(CLKX1 : in std_logic;
USER_START : in std_logic;
ADDRESS_CONTROL_FINISH : in std_logic;
MC_READY : in std_logic;
BRAM1_EN_toMUX : out std_logic; --Ausgangssignale zu BRAM1
BRAM1_EN_SEND : out std_logic;
BRAM1_RESET_toMUX : out std_logic;
BRAM1_RESET_SEND : out std_logic;
BRAM2_EN_RECEIVE : out std_logic; --Ausgangssignale zu BRAM2
BRAM2_EN_toMUX : out std_logic;
BRAM2_RESET_toMUX : out std_logic;
BRAM2_WRITE_EN : out std_logic;
MUX_RESET : out std_logic;
DES_EN : out std_logic;
SER_NEN : out std_logic;
SER_RESET : out std_logic;
ADDR_CONTROL_RESET_NEN : out
std_logic;--ADDRESS_CONTROL_RESET_(and)NotENable
MC_READ : out std_logic;
LED_Z0 : out std_logic; --die LEDs signalisieren den aktuellen
Zustand
LED_Z2 : out std_logic--;
);
end component;
component ADDRESS_CONTROL
generic(
ADDRESS_WIDTH : positive := 10
);
Port ( CLKX1 : in std_logic;
RESET_NEN : in STD_LOGIC;
ADDR_BRAM1 : out STD_LOGIC_VECTOR (9 downto 0);
ADDR_BRAM2 : out STD_LOGIC_VECTOR (9 downto 0);
FINISH : out std_logic
);
end component;
component SER16to1
Port ( CLKX8 : in std_logic; --8facher Takt (bezogen auf den Takt des
16 Bit breiten Datenbus)
CLKX8_180 : in std_logic; --8facher Takt invertiert
RESET : in std_logic; --Reseteingang
NotENABLE : in std_logic;
DATA_PARALLEL : in std_logic_vector(15 downto 0);
ODATA_LVDSP : out std_logic;
ODATA_LVDSN : out std_logic);
end component;
component DES1to16
Port ( ENABLE : in std_logic; --mit DCM_LOCKED verbinden
IDATA_LVDSP : in std_logic;
IDATA_LVDSN : in std_logic;
CLKX8 : in STD_LOGIC;
CLKX8_180 : in STD_LOGIC;
CLKX1 : in STD_LOGIC;
DATA_OUT : out STD_LOGIC_VECTOR (15 downto 0)
);
end component;
component MUX
generic(
DATA_WIDTH: positive := 4;--Breite des Datenbusses
ADRESS_WIDTH_toMC: positive := 12;
CONTROL_WIDTH: positive := 2--Anzahl der Steuerleitungen
);
Port ( DATA1 : in STD_LOGIC_VECTOR (3 downto 0);--Daten von BRAM1
DATA2 : in STD_LOGIC_VECTOR (3 downto 0);--Daten von BRAM2
DATA_OUT : out STD_LOGIC_VECTOR (3 downto 0);--Datenbus zum
Mikrocontroller
ADRESS1 : out std_logic_vector(11 downto 0);--Adressbusse zu den
BRAMs
ADRESS2 : out std_logic_vector(11 downto 0);
RESET : in std_logic;--asynchrones Resetsignal von der
State-Machine
INDICATION : out STD_LOGIC_VECTOR(1 downto 0);--Kontrollbus
zum Mikrocontroller
CLK_extMC : in STD_LOGIC;--Auslesetakt für die BRAMs (vom
Mikrocontroller generiert)
CLK_fromMC
ut STD_LOGIC
);
end component;
component BRAM_SEND
port(
DATA_toMUX : out std_logic_vector(3 downto 0); -- Port A 4-bit
Data Output
DATA_toSER : out std_logic_vector(15 downto 0); -- Port B
16-bit Data Output
ADDRESS_MUX: in std_logic_vector(11 downto 0); -- Port A 12-bit
Address Input
ADDRESS_SEND: in std_logic_vector(9 downto 0); -- Port B 10-bit
Address Input
CLK_MUX : in std_logic; -- Port A Clock
CLKX1 : in std_logic; -- Port B Clock
EN_toMUX : in std_logic; -- Port A RAM Enable Input
EN_SEND : in std_logic; -- PortB RAM Enable Input
RESET_toMUX : in std_logic; -- Port A Synchronous Set/Reset
Input
RESET_SEND : in std_logic -- Port B Synchronous Set/Reset Input
);
end component;
component BRAM_RECEIVE
port(
DATA_toMUX : out std_logic_vector(3 downto 0); -- Port A 4-bit
Data Output
DATA_fromDES : in std_logic_vector(15 downto 0); -- Port B
16-bit Data Intput
ADDRESS_MUX: in std_logic_vector(11 downto 0); -- Port A 12-bit
Address Input
ADDRESS_RECEIVE: in std_logic_vector(9 downto 0); -- Port B
10-bit Address Input
CLK_MUX : in std_logic; -- Port A Clock
CLKX1_PS : in std_logic; -- Port B Clock (PS: phase-shifted)
Verzögerung des DUTs
EN_toMUX : in std_logic; -- Port A RAM Enable Input
EN_RECEIVE : in std_logic; -- PortB RAM Enable Input
RESET_toMUX : in std_logic; -- Port A Synchronous Set/Reset
Input
WRITE_ENABLE : in std_logic
);
end component;
component GENERATE_CLOCK
Port ( CLKIN_IN : in std_logic; --Oszillator mit 66 MHz
(meltemi: P36)
CLKDV_OUT : out std_logic; --33 Mhz Takt
CLKFX_OUT : out std_logic; --264 MHz Takt
CLKFX180_OUT : out std_logic
);
end component;
signal CLKX1, CLKX8, CLKX8_180 : std_logic;
signal ADDRESS_CONTROL_FINISH, BRAM1_EN_SEND, BRAM1_RESET_toMUX,
BRAM1_RESET_SEND : std_logic;
signal BRAM2_EN_RECEIVE, BRAM2_RESET_toMUX, BRAM2_WRITE_EN, MUX_RESET :
std_logic;
signal DES_EN, SER_NEN, SER_RESET, ADDR_CONTROL_RESET_NEN : std_logic;
signal ADDR_BRAM1, ADDR_BRAM2 : std_logic_vector(9 downto 0);
signal DATA_toSER16to1, DATA_fromDES1to16 : std_logic_vector(15 downto
0);
signal DATA_toMUX_BRAM_S, DATA_toMUX_BRAM_R : std_logic_vector(3 downto
0);
signal ADDRESS_BRAM_SEND, ADDRESS_BRAM_RECEIVE : std_logic_vector(11
downto 0);
signal BRAM1_EN_toMUX, BRAM2_EN_toMUX : std_logic;
signal USERSTART : std_logic := '0';
signal CLK_fromMC_buffered : STD_LOGIC;
--Taster :
--Tatser1 :
signal SHIFT_PB1 : STD_LOGIC_VECTOR (3 downto 0) := "0000";
signal BUTTON_DEBOUNCED1 : std_logic := '0';
signal LEVEL1 : std_logic := '0';
--CLK-Indication :
signal CNT : std_logic_vector(CNT_WIDTH-1 downto 0) := (others => '0');
constant MAX_CNT : std_logic_vector(CNT_WIDTH-1 downto 0) := (others =>
'1');
signal LEVEL : std_logic := '0';
begin
inst_GC : GENERATE_CLOCK
port map(
CLKIN_IN => CLK_IN, --externer Takt
CLKDV_OUT => CLKX1, --33 Mhz Takt
CLKFX_OUT => CLKX8, --264 MHz Takt
CLKFX180_OUT => CLKX8_180--CLKX8 um 180° phasenverschoben
);
inst_SM : STATE_MACHINE
port map(
CLKX1 => CLKX1,
USER_START => USERSTART,
ADDRESS_CONTROL_FINISH => ADDRESS_CONTROL_FINISH,
MC_READY => MC_READY,--MC herausgenommen
BRAM1_EN_toMUX => BRAM1_EN_toMUX, --Ausgangssignale zu BRAM1
BRAM1_EN_SEND => BRAM1_EN_SEND,
BRAM1_RESET_toMUX => BRAM1_RESET_toMUX,
BRAM1_RESET_SEND => BRAM1_RESET_SEND,
BRAM2_EN_RECEIVE => BRAM2_EN_RECEIVE, --Ausgangssignale zu BRAM2
BRAM2_EN_toMUX => BRAM2_EN_toMUX,
BRAM2_RESET_toMUX => BRAM2_RESET_toMUX,
BRAM2_WRITE_EN => BRAM2_WRITE_EN,
MUX_RESET => MUX_RESET,
DES_EN => DES_EN,
SER_NEN => SER_NEN,
SER_RESET => SER_RESET,
ADDR_CONTROL_RESET_NEN =>
ADDR_CONTROL_RESET_NEN,--ADDRESS_CONTROL_RESET_(and)NotENable
MC_READ => MC_READ,
LED_Z0 => LED_Z0, --die LEDs signalisieren den aktuellen Zustand
LED_Z2 => LED_Z2
);
inst_AC : ADDRESS_CONTROL
port map(
CLKX1 => CLKX1,
RESET_NEN => ADDR_CONTROL_RESET_NEN,
ADDR_BRAM1 => ADDR_BRAM1, --BRAM_SEND
ADDR_BRAM2 => ADDR_BRAM2, --BRAM_RECEIVE
FINISH => ADDRESS_CONTROL_FINISH
);
inst_SER : SER16to1
port map(
CLKX8 => CLKX8, --8facher Takt (bezogen auf den Takt des 16 Bit
breiten Datenbus)
CLKX8_180 => CLKX8_180, --8facher Takt invertiert
RESET => SER_RESET, --Reseteingang
NotENABLE => SER_NEN,
DATA_PARALLEL => DATA_toSER16to1,
ODATA_LVDSP => LVDS_Ps,
ODATA_LVDSN => LVDS_Ns
);
inst_DES : DES1to16
port map(
ENABLE => DES_EN, --mit DCM_LOCKED verbinden
IDATA_LVDSP => LVDS_Pr,
IDATA_LVDSN => LVDS_Nr,
CLKX8 => CLKX8,
CLKX8_180 => CLKX8_180,
CLKX1 => CLKX1,
DATA_OUT => DATA_fromDES1to16
);
inst_MUX : MUX
port map(
DATA1 => DATA_toMUX_BRAM_S,--Daten von BRAM1
DATA2 => DATA_toMUX_BRAM_R,--Daten von BRAM2
DATA_OUT => DATA_toMC,--Datenbus zum Mikrocontroller
ADRESS1 => ADDRESS_BRAM_SEND,--Adressbusse zu den BRAMs
ADRESS2 => ADDRESS_BRAM_RECEIVE,
RESET => MUX_RESET,--asynchrones Resetsignal von der State-Machine
INDICATION => INDICATION_MUXtoMC,--Kontrollbus zum
Mikrocontroller
CLK_extMC => CLK_fromMC--Auslesetakt für die BRAMs (vom
Mikrocontroller generiert)
);
inst_BRAM_S : BRAM_SEND --BRAM1
port map(
DATA_toMUX => DATA_toMUX_BRAM_S, -- Port A 4-bit Data Output
DATA_toSER => DATA_toSER16to1, -- Port B 16-bit Data Output
ADDRESS_MUX => ADDRESS_BRAM_SEND, -- Port A 12-bit Address Input
ADDRESS_SEND => ADDR_BRAM1, -- Port B 10-bit Address Input
CLK_MUX => CLK_fromMC_buffered, -- Port A Clock
CLKX1 => CLKX1, -- Port B Clock
EN_toMUX => BRAM1_EN_toMUX, -- Port A RAM Enable Input
EN_SEND => BRAM1_EN_SEND, -- PortB RAM Enable Input
RESET_toMUX => BRAM1_RESET_toMUX, -- Port A Synchronous
Set/Reset Input
RESET_SEND => BRAM1_RESET_SEND -- Port B Synchronous Set/Reset
Input
);
inst_BRAM_R : BRAM_RECEIVE
port map(
DATA_toMUX => DATA_toMUX_BRAM_R, -- Port A 4-bit Data Output
DATA_fromDES => DATA_fromDES1to16, -- Port B 16-bit Data
Intput
ADDRESS_MUX => ADDRESS_BRAM_RECEIVE, -- Port A 12-bit Address
Input
ADDRESS_RECEIVE => ADDR_BRAM2, -- Port B 10-bit Address Input
CLK_MUX => CLK_fromMC_buffered, -- Port A Clock
CLKX1_PS => CLKX1, -- Port B Clock (PS: phase-shifted)
Verzögerung des DUTs
EN_toMUX => BRAM2_EN_toMUX, -- Port A RAM Enable Input
EN_RECEIVE => BRAM2_EN_RECEIVE, -- PortB RAM Enable Input
RESET_toMUX => BRAM2_RESET_toMUX, -- Port A Synchronous
Set/Reset Input
WRITE_ENABLE => BRAM2_WRITE_EN
);
--CLK-Indication :
CLK_indication: process(CLKX1)
begin
if (CLKX1'event and CLKX1 = '1') then
if CNT = MAX_CNT then
LEVEL <= not LEVEL;
CNT <= (others => '0');
else
CNT <= CNT +1;
end if;
end if;
end process;
LED_Z1 <= LEVEL;
--LED_Z1 <= '1';
----Taster1 :
DEBOUNCE1: process(CLKX1)
begin
if (CLKX1'event and CLKX1 = '1') then
-- Use a shIFt register to filter switch contact bounce
SHIFT_PB1(2 downto 0) <= SHIFT_PB1(3 downto 1);
SHIFT_PB1(3) <= BUTTON;
if SHIFT_PB1(3 downto 0) = "0000" then
BUTTON_DEBOUNCED1 <= '0';
else
BUTTON_DEBOUNCED1 <= '1';
end if;
end if;
end process;
SWITCH1: process(BUTTON_DEBOUNCED1)
begin
if (BUTTON_DEBOUNCED1'event and BUTTON_DEBOUNCED1 = '1') then
LEVEL1 <= not LEVEL1;
end if;
end process;
USERSTART <= LEVEL1;
end Behavioral;
--GENERATE_CLOCK-FILE :
*********************************************************************************
library ieee;
use ieee.std_logic_1164.ALL;
use ieee.numeric_std.ALL;
library UNISIM;
use UNISIM.Vcomponents.ALL;
--konfiguriert für einen Eingangstakt der Frequenz 66 MHz
entity GENERATE_CLOCK is
port ( CLKIN_IN : in std_logic; --Oszillator mit 66 MHz
(meltemi: P36)
CLKDV_OUT : out std_logic; --33 Mhz Takt
CLKFX_OUT : out std_logic; --264 MHz Takt
CLKFX180_OUT : out std_logic
);-- = '1' -> DCM eingeschwungen
end GENERATE_CLOCK;
architecture BEHAVIORAL of GENERATE_CLOCK is
component BUFG
port ( I : in std_logic;
O : out std_logic);
end component;
component IBUFG
port ( I : in std_logic;
O : out std_logic);
end component;
-- Period Jitter (unit interval) for block DCM_INST = 0.17 UI
-- Period Jitter (Peak-to-Peak) for block DCM_INST = 0.63 ns
component DCM
generic( CLK_FEEDBACK : string := "1X";
CLKDV_DIVIDE : real := 2.0;
CLKFX_DIVIDE : integer := 1;
CLKFX_MULTIPLY : integer := 4; ---sonst 4 !!!
CLKIN_DIVIDE_BY_2 : boolean := FALSE;
CLKIN_PERIOD : real := 10.0;
CLKOUT_PHASE_SHIFT : string := "NONE";
DESKEW_ADJUST : string := "SYSTEM_SYNCHRONOUS";
DFS_FREQUENCY_MODE : string := "LOW";
DLL_FREQUENCY_MODE : string := "LOW";
DUTY_CYCLE_CORRECTION : boolean := TRUE;
FACTORY_JF : bit_vector := x"8080";
PHASE_SHIFT : integer := 0;
STARTUP_WAIT : boolean := FALSE;
DSS_MODE : string := "NONE");
port ( CLKIN : in std_logic;
CLKFB : in std_logic;
RST : in std_logic;
PSEN : in std_logic;
PSINCDEC : in std_logic;
PSCLK : in std_logic;
DSSEN : in std_logic;
CLK0 : out std_logic;
CLK90 : out std_logic;
CLK180 : out std_logic;
CLK270 : out std_logic;
CLKDV : out std_logic;
CLK2X : out std_logic;
CLK2X180 : out std_logic;
CLKFX : out std_logic;
CLKFX180 : out std_logic;
STATUS : out std_logic_vector (7 downto 0);
LOCKED : out std_logic;
PSDONE : out std_logic);
end component;
signal CLKDV_BUF : std_logic;
signal CLKFB_IN : std_logic;
signal CLKFX_BUF : std_logic;
signal CLKFX180_BUF : std_logic;
signal CLKIN_IBUFG : std_logic;
signal CLK0_BUF : std_logic;
signal GND1 : std_logic;
begin
GND1 <= '0';
CLKDV_BUFG_INST : BUFG
port map (I=>CLKDV_BUF,
O=>CLKDV_OUT);
CLKFX_BUFG_INST : BUFG
port map (I=>CLKFX_BUF,
O=>CLKFX_OUT);
CLKFX180_BUFG_INST : BUFG
port map (I=>CLKFX180_BUF,
O=>CLKFX180_OUT);
CLKIN_IBUFG_INST : IBUFG
port map (I=>CLKIN_IN,
O=>CLKIN_IBUFG);
CLK0_BUFG_INST : BUFG
port map (I=>CLK0_BUF,
O=>CLKFB_IN);
DCM_INST : DCM
generic map( CLK_FEEDBACK => "1X",
CLKDV_DIVIDE => 2.0,
CLKFX_DIVIDE => 1,
CLKFX_MULTIPLY => 4,
CLKIN_DIVIDE_BY_2 => FALSE,
CLKIN_PERIOD => 15.1515,
CLKOUT_PHASE_SHIFT => "NONE",
DESKEW_ADJUST => "SYSTEM_SYNCHRONOUS",
DFS_FREQUENCY_MODE => "HIGH",
DLL_FREQUENCY_MODE => "LOW",
DUTY_CYCLE_CORRECTION => TRUE,
FACTORY_JF => x"8080",
PHASE_SHIFT => 0,
STARTUP_WAIT => TRUE)
port map (CLKFB=>CLKFB_IN,
CLKIN=>CLKIN_IBUFG,
DSSEN=>GND1,
PSCLK=>GND1,
PSEN=>GND1,
PSINCDEC=>GND1,
RST=>'0',
CLKDV=>CLKDV_BUF,
CLKFX=>CLKFX_BUF,
CLKFX180=>CLKFX180_BUF,
CLK0=>CLK0_BUF,
CLK2X=>open,
CLK2X180=>open,
CLK90=>open,
CLK180=>open,
CLK270=>open,
LOCKED=>open,
PSDONE=>open,
STATUS=>open);
end BEHAVIORAL;
--STATE_MACHINE-FILE :
************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity STATE_MACHINE is
port(CLKX1 : in std_logic;
USER_START : in std_logic;
ADDRESS_CONTROL_FINISH : in std_logic;
MC_READY : in std_logic;
BRAM1_EN_toMUX : out std_logic; --Ausgangssignale zu BRAM1
BRAM1_EN_SEND : out std_logic;
BRAM1_RESET_toMUX : out std_logic;
BRAM1_RESET_SEND : out std_logic;
BRAM2_EN_RECEIVE : out std_logic; --Ausgangssignale zu BRAM2
BRAM2_EN_toMUX : out std_logic;
BRAM2_RESET_toMUX : out std_logic;
BRAM2_WRITE_EN : out std_logic;
MUX_RESET : out std_logic;
DES_EN : out std_logic;
SER_NEN : out std_logic;
SER_RESET : out std_logic;
ADDR_CONTROL_RESET_NEN : out
std_logic;--ADDRESS_CONTROL_RESET_(and)NotENable
MC_READ : out std_logic;
LED_Z0 : out std_logic;
LED_Z2 : out std_logic--;
);
end STATE_MACHINE;--Moore-Automat
architecture Behavioral of STATE_MACHINE is
type STATES is (Z0, Z1, Z2);
signal STATE: STATES := Z0;
signal NEXT_S: STATES := Z0;
signal STATE_Z0, STATE_Z2 : std_logic;
begin
STATE_MEMORY: process(CLKX1)
begin
if CLKX1'event and CLKX1 = '1' then--eventuell Flanke ändern?
STATE <= NEXT_S;
end if;
end process;
DEFINE_NEXT_STATE: process(USER_START, ADDRESS_CONTROL_FINISH, MC_READY
,STATE)
begin
case STATE is
when Z0 => if USER_START = '1' then
NEXT_S <= Z1;
else
NEXT_S <=Z0;
end if;
when Z1 => if ADDRESS_CONTROL_FINISH = '1' then
NEXT_S <= Z2;
else
NEXT_S <=Z1;
end if;
when Z2 => if MC_READY = '1' then
NEXT_S <= Z0;
else
NEXT_S <=Z2;
end if;
end case;
end process;
SET_OUTPUTS: process(STATE)
begin
case STATE is
when Z0 => BRAM1_EN_toMUX <= '0';
BRAM1_EN_SEND <= '0';
BRAM1_RESET_toMUX <= '1';
BRAM1_RESET_SEND <= '1';
BRAM2_EN_RECEIVE <= '0';
BRAM2_EN_toMUX <= '0';
BRAM2_RESET_toMUX <= '1';
BRAM2_WRITE_EN <= '0';
MUX_RESET <= '1';
DES_EN <= '0';
SER_NEN <= '1';
SER_RESET <= '1';
ADDR_CONTROL_RESET_NEN <= '1';
MC_READ <= '0';
when Z1 => BRAM1_EN_toMUX <= '0';
BRAM1_EN_SEND <= '1';
BRAM1_RESET_toMUX <= '1';
BRAM1_RESET_SEND <= '0';
BRAM2_EN_RECEIVE <= '1';
BRAM2_EN_toMUX <= '0';
BRAM2_RESET_toMUX <= '1';
BRAM2_WRITE_EN <= '1';
MUX_RESET <= '1';
DES_EN <= '1';
SER_NEN <= '0';
SER_RESET <= '0';
ADDR_CONTROL_RESET_NEN <= '0';
MC_READ <= '0';
when Z2 => BRAM1_EN_toMUX <= '1';
BRAM1_EN_SEND <= '0';
BRAM1_RESET_toMUX <= '0';
BRAM1_RESET_SEND <= '1';--eventuall ändern !
BRAM2_EN_RECEIVE <= '0';
BRAM2_EN_toMUX <= '1';
BRAM2_RESET_toMUX <= '0';
BRAM2_WRITE_EN <= '0';
MUX_RESET <= '0';
DES_EN <= '0';
SER_NEN <= '1';
SER_RESET <= '1';
ADDR_CONTROL_RESET_NEN <= '1';
MC_READ <= '1';
end case;
end process;
INDICATE_STATE: process(STATE)
begin
case STATE is
when Z0 => STATE_Z0 <= '1';
STATE_Z2 <= '0';
when Z1 => STATE_Z0 <= '0';
STATE_Z2 <= '0';
when Z2 => STATE_Z0 <= '0';
STATE_Z2 <= '1';
end case;
end process;
LED_Z0 <= STATE_Z0; --die LEDs signalisieren den aktuellen Zustand
LED_Z2 <= STATE_Z2;
end Behavioral;
ADDRESS_CONTROL-FILE :
********************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
entity ADDRESS_CONTROL is
generic(
ADDRESS_WIDTH : positive := 10
);
Port ( CLKX1 : in std_logic;
RESET_NEN : in STD_LOGIC;
ADDR_BRAM1 : out STD_LOGIC_VECTOR (ADDRESS_WIDTH-1 downto
0);
ADDR_BRAM2 : out STD_LOGIC_VECTOR (ADDRESS_WIDTH-1 downto
0);
FINISH : out std_logic
);
end ADDRESS_CONTROL;
architecture Behavioral of ADDRESS_CONTROL is
signal FINISH_FLAG : std_logic;
signal CNT : std_logic_vector(ADDRESS_WIDTH-1 downto 0);
constant MAX_ADDRESS : std_logic_vector(ADDRESS_WIDTH-1 downto 0) :"1111111111";
begin
CHANGE_ADDRESS: process(CLKX1)
begin
if CLKX1'event and CLKX1 = '1' then
if RESET_NEN = '1' then
CNT <= (others => '0');
FINISH_FLAG <= '0';
else
if CNT = MAX_ADDRESS then
FINISH_FLAG <= '1';
else
CNT <= CNT + 1;
FINISH_FLAG <= '0';
end if;
end if;
end if;
end process;
ADDR_BRAM1 <= CNT;
ADDR_BRAM2 <= CNT;
FINISH <= FINISH_FLAG;
end Behavioral;
--SER-FILE :
****************************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity SER16to1 is
Port ( CLKX8 : in std_logic; --8facher Takt (bezogen auf den Takt des
16 Bit breiten Datenbus)
CLKX8_180 : in std_logic; --8facher Takt invertiert
RESET : in std_logic; --Reseteingang
NotENABLE : in std_logic;
DATA_PARALLEL : in std_logic_vector(15 downto 0);
ODATA_LVDSP : out std_logic;
ODATA_LVDSN : out std_logic);
end SER16to1;
architecture Behavioral of SER16to1 is
signal DATA_POS_EDGE, DATA_NEG_EDGE, DOUBLE_R_DATA : std_logic;
signal CNT, CNT0: std_logic_vector(2 downto 0):= (others => '0');
begin
OFDDRRSE_inst : FDDRRSE --double datarate
port map (
Q => DOUBLE_R_DATA, -- Data output (connect directly to
top-level port)
C0 => CLKX8, -- 0 degree clock input
C1 => CLKX8_180, -- 180 degree clock input
--Commonly, the Digital Clock Manager
--(DCM) generates the two clock signals by mirroring an
--incoming signal, then shifting it 180 degrees. This approach
--ensures minimal skew between the two signals.
CE => '1', -- Clock enable input
D0 => DATA_POS_EDGE, -- Posedge data input
D1 => DATA_NEG_EDGE, -- Negedge data input
R => NotENABLE, -- Synchronous reset input
S => '0' -- Synchronous preset input
);
OBUFDS_inst : OBUFDS --LVDS-Output
generic map(
IOSTANDARD => "LVDSEXT_25")--Standard: siehe Datasheet S.62(Tabelle
36)
port map (
O => ODATA_LVDSP, -- Diff_p output (connect directly to
top-level port)
OB => ODATA_LVDSN, -- Diff_n output (connect directly to
top-level port)
I => DOUBLE_R_DATA -- Buffer input
);
--***********************************************************************
-- Prozess: COUNT
--
--Der Prozess fungiert als taktsynchroner Zähler von 0 bis 7 mit
--synchronem Reseteingang(highaktiv), der den Zählerstand auf Null
setzt.
--
-- Input (->: CLK8X, RESET
--***********************************************************************
COUNT: process(CLKX8_180)
begin
if(CLKX8_180'event and CLKX8_180='1') then
if RESET = '1' then
CNT <= (others => '0');
CNT0 <= (others => '0');
else
CNT <= CNT + '1';
CNT0 <= CNT;
end if;
end if;
end process;
--***********************************************************************
-- Prozess: MULTIPLEX
--
--Der Prozess legt in Abhängigkeit des Zählerstandes in CNT zwei
--aufeinanderfolgende Bits des parallelen Datenbusses DATA_PARALLEL an
--DATA_POS_EDGE und DATA_NEG_EDGE an.
--
-- Input (->: CLK8X_180, DATA_PARALLEL, CNT
-- Output(<-): DATA_POS_EDGE, DATA_NEG_EDGE
--***********************************************************************
MULTIPLEX: process(CLKX8_180)
begin
if(CLKX8_180'event and CLKX8_180='1') then
if(CNT0 = 0) then
DATA_POS_EDGE <= DATA_PARALLEL(0);--eventuell Reihenfolge aus
SERDES-File verwenden
DATA_NEG_EDGE <= DATA_PARALLEL(1);
elsif(CNT0 = 1) then
DATA_POS_EDGE <= DATA_PARALLEL(2);
DATA_NEG_EDGE <= DATA_PARALLEL(3);
elsif(CNT0 = 2) then
DATA_POS_EDGE <= DATA_PARALLEL(4);
DATA_NEG_EDGE <= DATA_PARALLEL(5);
elsif(CNT0 = 3) then
DATA_POS_EDGE <= DATA_PARALLEL(6);
DATA_NEG_EDGE <= DATA_PARALLEL(7);
elsif(CNT0 = 4) then
DATA_POS_EDGE <= DATA_PARALLEL(8);
DATA_NEG_EDGE <= DATA_PARALLEL(9);
elsif(CNT0 = 5) then
DATA_POS_EDGE <= DATA_PARALLEL(10);
DATA_NEG_EDGE <= DATA_PARALLEL(11);
elsif(CNT0 = 6) then
DATA_POS_EDGE <= DATA_PARALLEL(12);
DATA_NEG_EDGE <= DATA_PARALLEL(13);
else
DATA_POS_EDGE <= DATA_PARALLEL(14);
DATA_NEG_EDGE <= DATA_PARALLEL(15);
end if;
end if;
end process;--nach dem Reset wird die seriellen Daten mit CLK8X/2
verzögert ausgegeben
end Behavioral;
--DES-FILE :
****************************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
-- Die Daten werden nach 2 Perioden von CLKX1 an DATA_OUT ausgegeben
library UNISIM;
use UNISIM.VComponents.all;
entity DES1to16 is
Port ( ENABLE : in std_logic; --mit DCM_LOCKED verbinden
IDATA_LVDSP : in std_logic;
IDATA_LVDSN : in std_logic;
CLKX8 : in STD_LOGIC;
CLKX8_180 : in STD_LOGIC;
CLKX1 : in STD_LOGIC;
DATA_OUT : out STD_LOGIC_VECTOR (15 downto 0));
end DES1to16;
architecture Behavioral of DES1to16 is
signal DOUBLE_RATE_DATA_DES, DATA_NEG_EDGE, DATA_POS_EDGE : std_logic;
signal DD2 : std_logic_vector(15 downto 0);
signal DD1 : std_logic_vector(13 downto 0);
begin
IBUFDS_inst : IBUFDS
generic map (
IOSTANDARD => "LVDSEXT_25")
port map (
O => DOUBLE_RATE_DATA_DES, -- Clock buffer output
I => IDATA_LVDSP, -- Diff_p clock buffer input (connect directly
to top-level port)
IB => IDATA_LVDSN -- Diff_n clock buffer input (connect directly
to top-level port)
);
double_data_rate1: process(CLKX8)
begin
if CLKX8'event and CLKX8 = '1' then
DATA_POS_EDGE <= DOUBLE_RATE_DATA_DES;
end if;
end process;
double_data_rate2: process(CLKX8_180)
begin
if CLKX8_180'event and CLKX8_180 = '1' then
DATA_NEG_EDGE <= DOUBLE_RATE_DATA_DES;
end if;
end process;
process(CLKX8_180) begin
if(CLKX8_180'event and CLKX8_180='1') then
DD2(15) <= DATA_POS_EDGE;
DD2(14) <= DATA_NEG_EDGE;
DD2(13) <= DD2(15);
DD2(12) <= DD2(14);
DD2(11) <= DD2(13);
DD2(10) <= DD2(12);
DD2(9) <= DD2(11);
DD2(8) <= DD2(10);
DD2(7) <= DD2(9);
DD2(6) <= DD2(8);
DD2(5) <= DD2(7);
DD2(4) <= DD2(6);
DD2(3) <= DD2(5);
DD2(2) <= DD2(4);
DD2(1) <= DD2(3);
DD2(0) <= DD2(2);
end if;
end process;
process(CLKX1) begin
if(CLKX1'event and CLKX1 = '1') then
DD1 <= DD2(15 downto 2);
end if;
end process;
process(CLKX1) begin
if(CLKX1'event and CLKX1 = '1') then
if ENABLE = '1' then
DATA_OUT <= DD2(1 downto 0) & DD1;
else
DATA_OUT <= (others => '0');
end if;
end if;
end process;
end Behavioral;
--MUX-FILE :
****************************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity MUX is
generic(
DATA_WIDTH: positive := 4;--Breite des Datenbusses
ADRESS_WIDTH_toMC: positive := 12;
CONTROL_WIDTH: positive := 2--Anzahl der Steuerleitungen
);
Port ( DATA1 : in STD_LOGIC_VECTOR (DATA_WIDTH-1 downto 0);--Daten
von BRAM1
DATA2 : in STD_LOGIC_VECTOR (DATA_WIDTH-1 downto 0);--Daten
von BRAM2
DATA_OUT : out STD_LOGIC_VECTOR (DATA_WIDTH-1 downto
0);--Datenbus zum Mikrocontroller
ADRESS1 : out std_logic_vector(ADRESS_WIDTH_toMC-1 downto
0);--Adressbusse zu den BRAMs
ADRESS2 : out std_logic_vector(ADRESS_WIDTH_toMC-1 downto 0);
RESET : in std_logic;--asynchrones Resetsignal von der
State-Machine
INDICATION : out STD_LOGIC_VECTOR(CONTROL_WIDTH-1 downto
0);--Kontrollbus zum Mikrocontroller
CLK_extMC : in STD_LOGIC;--Auslesetakt für die BRAMs (vom
Mikrocontroller generiert)
CLK_fromMCut STD_LOGIC
);
end MUX;
architecture Behavioral of MUX is
signal CHOOSE: std_logic := '0';
signal ADRESS : std_logic_vector(ADRESS_WIDTH_toMC-1 downto 0);
signal CLK_MC : std_logic;
signal DATA_OUTs : std_logic_vector(DATA_WIDTH-1 downto 0);
constant MAX_ADRESS : std_logic_vector(ADRESS_WIDTH_toMC-1 downto 0) :"111111111111";--:= (others => '1');
begin
IBUFG_inst : IBUFG
generic map (
IOSTANDARD => "LVTTL")--Vmax = 3,3 V
port map (
O => CLK_MC, -- Clock buffer output
I => CLK_extMC -- Clock buffer input (connect directly to
top-level port)
);
COUNT: process(RESET,CLK_MC)
begin
if RESET = '1' then
ADRESS <= (others => '0'); --eventuell auf 2 oder 3 setzen
(Verzögerung des DES)
INDICATION <= "00";
CHOOSE <= '0';
DATA_OUTs <= "0000";
elsif CLK_MC'event and CLK_MC = '1' then
if ADRESS = MAX_ADRESS and CHOOSE = '1' then
INDICATION <= "11";
elsif CHOOSE = '1' then
INDICATION <= "10";
ADRESS <= ADRESS + 1;
DATA_OUTs <= DATA2;
CHOOSE <= not CHOOSE;
elsif CHOOSE = '0' then
INDICATION <= "01";
DATA_OUTs <= DATA1;
CHOOSE <= not CHOOSE;
end if;
end if;
end process;
ADRESS1 <= ADRESS;
ADRESS2 <= ADRESS;
DATA_OUT <= DATA_OUTs;
CLK_fromMC <= CLK_MC;
end Behavioral;
--BRAM_SEND-FILE :
*****************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity BRAM_SEND is
port(
DATA_toMUX : out std_logic_vector(3 downto 0); -- Port A 4-bit
Data Output
DATA_toSER : out std_logic_vector(15 downto 0); -- Port B
16-bit Data Output
ADDRESS_MUX: in std_logic_vector(11 downto 0); -- Port A 12-bit
Address Input
ADDRESS_SEND: in std_logic_vector(9 downto 0); -- Port B 10-bit
Address Input
CLK_MUX : in std_logic; -- Port A Clock
CLKX1 : in std_logic; -- Port B Clock
EN_toMUX : in std_logic; -- Port A RAM Enable Input
EN_SEND : in std_logic; -- PortB RAM Enable Input
RESET_toMUX : in std_logic; -- Port A Synchronous Set/Reset
Input
RESET_SEND : in std_logic -- Port B Synchronous Set/Reset Input
);
end BRAM_SEND;
architecture Behavioral of BRAM_SEND is
begin
RAMB16_S4_S18_instBRAM_S : RAMB16_S4_S18
generic map (
INIT_A => X"0", -- Value of output RAM registers on Port A at
startup
INIT_B => "000000000000000000", -- Value of output RAM registers
on Port B at startup
SRVAL_A => X"0", -- Port A ouput value upon SSR assertion
SRVAL_B => "000000000000000000", -- Port B ouput value upon SSR
assertion
WRITE_MODE_A => "WRITE_FIRST", -- WRITE_FIRST, READ_FIRST or
NO_CHANGE
WRITE_MODE_B => "WRITE_FIRST", -- WRITE_FIRST, READ_FIRST or
NO_CHANGE
SIM_COLLISION_CHECK => "ALL", -- "NONE", "WARNING",
"GENERATE_X_ONLY", "ALL
-- The following INIT_xx declarations specify the initial
contents of the RAM
-- Port A Address 0 to 1023, Port B Address 0 to 255
INIT_00 =>
X"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa",
INIT_01 =>
X"31A24DB059A566389894651BBD99BD2D8C9B354390CB86B5E70923CC10B65204",
INIT_02 =>
X"B75A641ACB7C72335E48B321BA380BC5AE9283A6251BEA66393419843808728D",
INIT_03 =>
X"3D2602D4EB565E4BD3ED9E420A33DC4880330B8BE847CCD78EA28B0D1629203B",
INIT_04 =>
X"7B584C96B3261E267E525534B3690D7A2AD1CC72E9BEB9DC5AE412A0D3E34174",
INIT_05 =>
X"4764D5C1BA875991B1B88A0DC825861D6714624105DBEEC93E9559134288753B",
INIT_06 =>
X"2A24E99ECED52732D58D25C5872420D4D2B6DC080B272BEA253E5AA815B2AA5E",
INIT_07 =>
X"A9EAB4871BD31ED9E7ACA6A2A562D3997107CE0748D5273B21A54A715116623A",
INIT_08 =>
X"0E8D512E0DDDA220348A7EC887150339A019A1CADA6B6C67C646B272C65B3945",
INIT_09 =>
X"47658CE4977E28C8BA23A832911095B56EAD0D46DE2E6D6A23B0D6A022B798C8",
INIT_0A =>
X"6D5D528AC725EB0D5AC9AA396A985E2041340DCCE61726EA3E62AD8796790D74",
INIT_0B =>
X"A63A2C98BD68A190ECE31E3705A9378C9D1E8552B3E7E5EE00A8D013C727A363",
INIT_0C =>
X"825E50D3C337E391D285B3E810E3A0D7685653D94D3E71908B1A0B41E592532B",
INIT_0D =>
X"37BBD94017A3516B4967BD75065601C1A07433BCD239DE86D92D4DA53D55B981",
INIT_0E =>
X"3E764373E02864893E1301E208892D2569D1ED0979D06EC0000928245A49AA11",
INIT_0F =>
X"AEA8387C19D3BAD3DED01AE68780851E039D6569CD94656616126E516764E078",
INIT_10 =>
X"9107D66D37276715944658B74A886219E8245299D83648117887622ACD2C35C5",
INIT_11 =>
X"397370A02C1787D6B595D4A5AC755CBE31E689D3051A08405ECC1E99030855C1",
INIT_12 =>
X"7331991EA02E2DEA3D652D24661C90E9D16940AA1AAE91399003462DD631AC94",
INIT_13 =>
X"A2CB044E7A59C17279009084672932CC3533E4EBED516AC7721ECBD266883CD1",
INIT_14 =>
X"A1765046C93423316DD2B122D28AD0DCDD103BA92EE602D8422012220C91032D",
INIT_15 =>
X"4592C5C36758B8D5D1C023E6382A362A9D368B2D4A55B635A832D51AA42728CE",
INIT_16 =>
X"EE8C72A89284A695C3D69DB5902E5319A2EA837D7609ACA4AA6CA489B7D302B1",
INIT_17 =>
X"5C3E3E9E9C0878C8AC6ECBE615836CCB43C1A5E4603224A7B01C4D30BA613848",
INIT_18 =>
X"70CE6A81349A33784ED013CDB6E62C469B471315970CB17B7589025586833A6C",
INIT_19 =>
X"05540E35E27C1277A11C0E6D17D114926B534032D816C57B7B11B524306498ED",
INIT_1A =>
X"708D82706D0B19581D1A8E58BCE5D5296C61CA6022E55BDD1DD16162094D4EED",
INIT_1B =>
X"2A693B87804ABE0A13AA3AB724B2A791C18DA76921DC35228D5EC1D9763C6725",
INIT_1C =>
X"D990AB41C6BD350363DB64D013484D6A59A0065A6DE67C00A7A256C28001D80B",
INIT_1D =>
X"E820A2025B1818A1A471AC876C288829A0594A85445B1B7834C73D5434DEC9E5",
INIT_1E =>
X"5247B680E5856510890DEB25C1835930256A2CEE12857D397DDE185EB277186D",
INIT_1F =>
X"BA60A017C650389739C753904943A841538E0670A65E83AC4043790C30E6669A",
INIT_20 =>
X"246C9E9DCB5D2D4CC66AA13C65AC49401B640926975ED881D5BE04838EA68123",
INIT_21 =>
X"3B98B3398E27C17667801A7AB02CA95E8756A83B02A24CD777936336AB82B0B7",
INIT_22 =>
X"EAB1A46DD0A426D85C40E307D858ADC1608B8CCDECD0CDC508129ED37712EA08",
INIT_23 =>
X"906539C37E94749A9EE3587351CB4DD87E382834ACABCB5C1B805D840C3C22A0",
INIT_24 =>
X"23BBD272324592E18081970242A3BA026693A37DA93CD1AC2CB3A7A8186951B5",
INIT_25 =>
X"BA4CD0D6ABC1C9948551DAA39CDA85BE7D666853B026573D5A6149D83C83230B",
INIT_26 =>
X"E82DE897419589BE836419AC18918889C2D9A1EACDE94ABD93E92A845B9D6C00",
INIT_27 =>
X"6061B4CDA55B0B32779A270D19D8AA0531A0C89BA1E17A4016A002ADD2235777",
INIT_28 =>
X"9CB86AED9549A707235322D3C5463796DE311DC541AB2CD0912CDE44B8DDCE71",
INIT_29 =>
X"B43024155B29AC819D78944DA8574EED8A0E357072CEE0916AE57D686471EE3C",
INIT_2A =>
X"DD6C8048AE468CD92990C481D7C1EB6ED8681E022A608828D190B171463592C4",
INIT_2B =>
X"11ED653750DC76D8B653769DE776DCA4279A0DC428ABBE7934917B70EB280301",
INIT_2C =>
X"E679CCAB8C41DA9B3C68E037E62CCDA28AC3B962EAB29EB840A2A6648C910749",
INIT_2D =>
X"B3E18D758E9B71D12B73BB60DEB04C7951BC8D98BD468207AC1C06C1C04DB702",
INIT_2E =>
X"B2A81000A55C3B44BE30D942E9E6068DA8BE420998BE13EB6813059B03C71897",
INIT_2F =>
X"CD935A639274D03D83B1597E77BA72725D6543414079037792295D6D3ED02B6E",
INIT_30 =>
X"D3EB4528A277C02A53B405BAC8C291B90D86A83AAB0C0659A64D9A1722B2E7D6",
INIT_31 =>
X"A52B397960E0BB813D650DEDDE8934E6E7CC0CD738835C83BD0670310A89035E",
INIT_32 =>
X"3008A539DA3B2B0CC660AB7C3335BD7B4E7851EDBB1D82494D09EC22011E5C59",
INIT_33 =>
X"867370158A154636585837376EB91D7B5A3CA037846706665D94A89DC25E6590",
INIT_34 =>
X"52B23273DD410DD802E4D86211B4866A46D719B12187B7C9E21DC9D816CA43A9",
INIT_35 =>
X"494494A876798145C8D4C19D2C4828D2698C994356323A4A3444ED9D03D67DD9",
INIT_36 =>
X"3560BB813222D28614B06885C11BADB5481ADE0402EE672076DD96935A02EBAC",
INIT_37 =>
X"747673B5ACB7B60DC6B8BA3B99612D36B82D479503719C6C0BBE9E9BB0AB5C50",
INIT_38 =>
X"7E5B3037525C8044D085A4C294204C32786478A4D7D08D1C2E91486C5CCA00DA",
INIT_39 =>
X"72E9D33644047E9C975DC8EACD22A7C1BCA17E08AC475B5382D57712DD5B9495",
INIT_3A =>
X"E1ECEA16C38C7B91004A1DB9621DEBE7AAAA53319860BAB59736958915AE8110",
INIT_3B =>
X"06D6C17D9EA65C31707CE127460640BE179626E758C41A5D117E85748E79770D",
INIT_3C =>
X"46746B699DBE74D2582A669821825634984163E8C49B48494A71122A135CA2EC",
INIT_3D =>
X"E63E9317D9678103A976196BE59BB75816A6140C68E95221567E103CB184E5A1",
INIT_3E =>
X"55BADDCBB01705A7A516A9EE5261952711D56002138E300DC5A8068ACE48243E",
INIT_3F =>
X"DA2A16DDDC46264E61237022D97510AA6AC244EA0A66C6D62A0A934EDB27C9CB",
-- The next set of INITP_xx are for the parity bits
-- Port A Address 0 to 1023, Port B Address 0 to 255
INITP_00 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
INITP_01 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
-- Port A Address 1024 to 2047, Port B Address 256 to 511
INITP_02 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
INITP_03 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
-- Port A Address 2048 to 3071, Port B Address 512 to 767
INITP_04 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
INITP_05 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
-- Port A Address 3072 to 4095, Port B Address 768 to 1023
INITP_06 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
INITP_07 =>
X"0000000000000000000000000000000000000000000000000000000000000000")
port map (
DOA => DATA_toMUX, -- Port A 4-bit Data Output
DOB => DATA_toSER, -- Port B 16-bit Data Output
DOPB => open, -- Port B 2-bit Parity Output
ADDRA => ADDRESS_MUX, -- Port A 12-bit Address Input
ADDRB => ADDRESS_SEND, -- Port B 10-bit Address Input
CLKA => CLK_MUX, -- Port A Clock
CLKB => CLKX1, -- Port B Clock
DIA => "1111", -- Port A 4-bit Data Input
DIB => "1111111111111111", -- Port B 16-bit Data Input
DIPB => "11", -- Port-B 2-bit parity Input
ENA => EN_toMUX, -- Port A RAM Enable Input
ENB => EN_SEND, -- PortB RAM Enable Input
SSRA => RESET_toMUX, -- Port A Synchronous Set/Reset Input
SSRB => RESET_SEND, -- Port B Synchronous Set/Reset Input
WEA => '0', -- Port A Write Enable Input
WEB => '0' -- Port B Write Enable Input
);
end Behavioral;
--BRAM_RECEIVE-FILE :
*************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity BRAM_RECEIVE is
port(
DATA_toMUX : out std_logic_vector(3 downto 0); -- Port A 4-bit
Data Output
DATA_fromDES : in std_logic_vector(15 downto 0); -- Port B
16-bit Data Intput
ADDRESS_MUX: in std_logic_vector(11 downto 0); -- Port A 12-bit
Address Input
ADDRESS_RECEIVE: in std_logic_vector(9 downto 0); -- Port B
10-bit Address Input
CLK_MUX : in std_logic; -- Port A Clock
CLKX1_PS : in std_logic; -- Port B Clock (PS: phase-shifted)
Verzögerung des DUTs
EN_toMUX : in std_logic; -- Port A RAM Enable Input
EN_RECEIVE : in std_logic; -- PortB RAM Enable Input
RESET_toMUX : in std_logic; -- Port A Synchronous Set/Reset
Input
WRITE_ENABLE : in std_logic
);
end BRAM_RECEIVE;
architecture Behavioral of BRAM_RECEIVE is
begin
RAMB16_S4_S18_instBRAM_R : RAMB16_S4_S18
generic map (
INIT_A => X"0", -- Value of output RAM registers on Port A at
startup
INIT_B => "000000000000000000", -- Value of output RAM registers
on Port B at startup
SRVAL_A => X"0", -- Port A ouput value upon SSR assertion
SRVAL_B => "000000000000000000", -- Port B ouput value upon SSR
assertion
WRITE_MODE_A => "WRITE_FIRST", -- WRITE_FIRST, READ_FIRST or
NO_CHANGE
WRITE_MODE_B => "WRITE_FIRST", -- WRITE_FIRST, READ_FIRST or
NO_CHANGE
SIM_COLLISION_CHECK => "ALL", -- "NONE", "WARNING",
"GENERATE_X_ONLY", "ALL
-- The following INIT_xx declarations specify the initial
contents of the RAM
-- Port A Address 0 to 1023, Port B Address 0 to 255
INIT_00 =>
X"0B3590A1A174768987DBEA2C0A79BC3074933CE64B47E2B94839CABE379ECC71",
INIT_01 =>
X"757BD429738DA3B5A0B9494ED34701908332C6C3E6E7B76EA71E874BD75ACC6D",
INIT_02 =>
X"EE5D23172975488DE0E4C2CBB8107AC1E5944BB3DA3C0EB51318D2EA77138A60",
INIT_03 =>
X"579DB42A34470D66B69964892EE560544E7403D0487D9CA8010837BDAD631005",
INIT_04 =>
X"2399A631B2036C2EB2AC8E53ABE27DEDBC5188D14B3A3392557ABE3738321422",
INIT_05 =>
X"C8090DEA9B8B3E883E6489635B31E416468ED9687A5B358874275327AE030008",
INIT_06 =>
X"731B6C3308B38B6C0D326BB6D3E06770238588261AA155D9C1C4A5A3D13429C7",
INIT_07 =>
X"C918863BBECA868E6B3C85928E1CBDB6C38E6CA474D1679D512EC630D4714340",
INIT_08 =>
X"10566A52029BCCB3908DEDE5BCD66D8A0B9A8EA8209E86E46846C0B2809843B9",
INIT_09 =>
X"859E4E4D966313D79E3D6468BE556E5D2E86E7DED1E6BCA47B8A969969AB0356",
INIT_0A =>
X"5C8D1CEBB5E6E922785C707BED2633EB00BD915C902A056B5D06ED024914310A",
INIT_0B =>
X"550D1E5B4D9A10859202097C13533CDD9A9760BDB0D15C5A8404AC334CE35E32",
INIT_0C =>
X"134CB61CC92880A2A3A07045E587DECE9B9211B70944E4A2521E0940AC9113E3",
INIT_0D =>
X"EC82D7253C621B02A01DB21467D4A940EAE7491CE779070CDD17C0180DA6E7D6",
INIT_0E =>
X"7515EB022A8849ACA9A5C75251862103763144ADDB5AD12D599A57A120E4223B",
INIT_0F =>
X"24A096D40000CCBC1AAB8A64746725837098DE73BDBDC5324B670B7E29240533",
INIT_10 =>
X"D53CE81960775D439C74ED1D2754229BD42D46DDB9950CE2859B7B8241166535",
INIT_11 =>
X"A7A790B1BED30631AB5EC5B9BDB59EAB0CAC4E3D88EDDD6A1D182AADA54B3D4A",
INIT_12 =>
X"251CBA57185B5D4668AB34A466D81970AD1CEBE3AC0A187E3EB74187A6AC2CDA",
INIT_13 =>
X"7EEDE77DD75437D53E9207A92BBC67914A41A408566072127EA3B2DEB9D53C06",
INIT_14 =>
X"E0D1C599386389B6B54BA14C2B789E3A979811CB416933A62937ADD04EB189AB",
INIT_15 =>
X"464662DA8020A74474A87C2A52A407C41CE69291558C3937C34C86DACA5D2775",
INIT_16 =>
X"16A4643C5E97803607E2864BE61C5BA3014B497CE6128D18A6E77C582681A4A8",
INIT_17 =>
X"C6A37A99254E0DD0462D39BEC8034DCECCDAE6BB732134CD59878443E675A089",
INIT_18 =>
X"739914A602CD098E674EE2A54AD370EC953A4ADCB8D35EA090394325DC72B3CC",
INIT_19 =>
X"63A805EACD00E597D70C8AB5A681BA8294272390BE1C33BC6D1725509C23EDAC",
INIT_1A =>
X"B144B8C3B9B62748CE689E60B1C5A36DCE9E268D484B9154976ADAE407567E18",
INIT_1B =>
X"D4077889214A840C1A88E3CADE1A880EC65E97784521D515C37D575B0ABEA0E1",
INIT_1C =>
X"41403DE8985618E4D9D71A8856371D92C76DBA6E890929A021DCBA19051A60C4",
INIT_1D =>
X"6DACB5AA04550902A834C0B4031A04A6BC0DB5149DCA4BB2B9C7EE058586885C",
INIT_1E =>
X"DD3DE0AB96E7EED41168A0EA91E9D0715A48DA1C947D0383DD73A5BBECE04E38",
INIT_1F =>
X"6864B20C2D189816EC938CB71656978122D7781DA562ADB21CAED81AC5E2A53A",
INIT_20 =>
X"B2236BB14A6770370DED633D27ECB88C50622A3D7D77EB87A7E0379662DBCA98",
INIT_21 =>
X"289EC1D363D15E3B38601D02A13523815674B6B59335BB8815309DA65EC8381B",
INIT_22 =>
X"3EBAE3DE211C45498C23112D6765593CE3B6CE3C436C2D16A8E84BD7D4968C8B",
INIT_23 =>
X"DC91077562070CDC3DB6CECE4776AD272663D3467C2C162C06041C9017714181",
INIT_24 =>
X"2E1715E9C1C88E9A1D23B47E7EB3CA8C1D71DB28E4A5AE90D3E6A8D4D22D34E3",
INIT_25 =>
X"62C6327D4A632400B881AC5C789708D4434B51E6A006C582B3201913B742A06C",
INIT_26 =>
X"34BB8C76C978EC4BB4092BD8645E5B7B7BA4465D0D7038ADE925D8C17133E249",
INIT_27 =>
X"02E14B2469EA143810931358BBE92B3917948E026B91B8207BBD18CCB41B0536",
INIT_28 =>
X"B15BDDB22ED3989D6A58D0A63D1D1CEBDB8340E917447B31950EC8C347BB0D17",
INIT_29 =>
X"66052893E55DC45710706D8E3CBBD618CA2D67162DE6E8EE0AD2049BA2B46777",
INIT_2A =>
X"977285925069B73AC154A8ECE130AD752A897E48AC719623504164B83C76E0C5",
INIT_2B =>
X"89B4BE42541A847B0223922554D451094A635DE9544205622B36D293799B11A1",
INIT_2C =>
X"79B9CD247A7973EA5B762E132C955D0901C3AE80C74CB38CC58C8EBDD4DBE0E3",
INIT_2D =>
X"2C92774BAA711678215E1A62B54395664089B050AC764D18463D6E025888103D",
INIT_2E =>
X"A94C2C9C964974C62ADC092CC62AA01B53814B569290A0DE47C61E084D49BEDC",
INIT_2F =>
X"7BCBA95019C7D167B6A6BC80584578582C9389EE1757C4D506249C2BBAD9BE9C",
INIT_30 =>
X"81211DC8374AD2D8AAAE52068C386219D13749970D68D60B97CE1ED587786C32",
INIT_31 =>
X"CE616EA9658D4B3724958B4DCB9C7C308929AC8BA7C7B048BE8DD12D31E09A57",
INIT_32 =>
X"CAE0555E5C4AED028CE36ECE5CAEA51E5C790CD086D69513970B538117ED91D4",
INIT_33 =>
X"79EE0487DC6BC15325DE54501B4E6A86C36291590CAAC1D2300BB75E382066E0",
INIT_34 =>
X"48CC0E891D2146B3A1524249B64321EA29EA7A0ECB60066E7AA0CE99035A2B53",
INIT_35 =>
X"ACA96E9CDDDEB7CBE385827B481BC8454A6D97117CBAA7E64421E5D9E6C24946",
INIT_36 =>
X"4CC35D2066B48B1545E9393DC665EDC8EA458C9753EC40910935507B6A3C8582",
INIT_37 =>
X"5C0279A105462789E9AC29566D527E65324A26ECC674D31A3E8A7CED5ACD525D",
INIT_38 =>
X"888551B655EC6E6930C940B71B755A7E3EEC888729349B981ECEE2C4A9437681",
INIT_39 =>
X"A13539E0D35A409D50E07EACE4D86067D219A133EEA04CBBB8533356EAD153AC",
INIT_3A =>
X"D7AE7AA282818050A618B3321458D9190A9C8274402C18C7ED2901487E7D36B0",
INIT_3B =>
X"05B4E9256519A36309D976C500ADE14590D51A175C3D6B68351424C15A8462C5",
INIT_3C =>
X"9BB38E3071EE97A40156A5AD5DBE49E757E16D1BD195DEC7C7A7D79D488AB5AA",
INIT_3D =>
X"13539E09B9339078A1151363907AA370AB6A49B1366A6889DCD2AD14741DA981",
INIT_3E =>
X"765B0AED38804B7D11A8CC166E97A3A3676AE7A1C656A80116A394203D03D4B8",
INIT_3F =>
X"35061DB65D374DB727B6AA34C3ADA0E8D6A4A00489978B220AD0214A73C5D8E9")
port map (
DOA => DATA_toMUX, -- Port A 4-bit Data Output
DOB => open, -- Port B 16-bit Data Output
DOPB => open, -- Port B 2-bit Parity Output
ADDRA => ADDRESS_MUX, -- Port A 12-bit Address Input
ADDRB => ADDRESS_RECEIVE, -- Port B 10-bit Address Input
CLKA => CLK_MUX, -- Port A Clock
CLKB => CLKX1_PS, -- Port B Clock
DIA => "1111", -- Port A 4-bit Data Input
DIB => DATA_fromDES, -- Port B 16-bit Data Input
DIPB => "11", -- Port-B 2-bit parity Input
ENA => EN_toMUX, -- Port A RAM Enable Input
ENB => EN_RECEIVE, -- PortB RAM Enable Input
SSRA => RESET_toMUX, -- Port A Synchronous Set/Reset Input
SSRB => '0', -- Port B Synchronous Set/Reset Input
WEA => '0', -- Port A Write Enable Input
WEB => WRITE_ENABLE -- Port B Write Enable Input
);
end Behavioral;
I started programming with VHDL two months ago. Now I want to implement
a project on a Spartan 3 (XC3S50 VQ100). The software I´m using is the
ISE Webpack 8.2.03i (Application Version: I.34).
This project is later supposed to be a bit error testing instance in
combination with an Microcontroller that is used to read out an compare
the sended and received data from the block RAMs of the Spartan 3.
I tested the components I used as standalone-designs and they all seem
to function but when I try to make one pice of all designs the FPGA
doesn´t show any expected behaviour at all-even some simple LED I
integrated in the design to indicate if the clock is active don't start
flashing.
Although i know it's probably not the smartest way to ask for help but
as I need this project to function for my thesis i have no other ideas
than posting the whole code - any words are very appreciated (the
comments are in german and not so important)!!!
p.s.: It would also help if someone would just copy and paste this code
into a new projektfile to find out if it´s running(simplest
indication: the State LED_Z0 should be on and the LED_Z1 should be
flashing) on his hardware.
#UCF - File :
****************************************************************************************************
NET "CLK_IN" LOC = "P36" | IOSTANDARD = LVTTL ; #Takt vom
Meltemi-Board (66 MHz)
NET "CLK_fromMC" LOC = "P39" | IOSTANDARD = LVTTL ;#Takt com MC
NET "DATA_toMC<0>" LOC = "P30" | IOSTANDARD = LVTTL
;#Datenleitungen
NET "DATA_toMC<1>" LOC = "P32" | IOSTANDARD = LVTTL ;
NET "DATA_toMC<2>" LOC = "P34" | IOSTANDARD = LVTTL ;
NET "DATA_toMC<3>" LOC = "P35" | IOSTANDARD = LVTTL ;
NET "MC_READY" LOC = "P43" | IOSTANDARD = LVTTL ;#MC ist fertig mit
Auslesen
NET "MC_READ" LOC = "P44" | IOSTANDARD = LVTTL ;#MC soll mit Auslesen
beginnen
NET "INDICATION_MUXtoMC<1>" LOC = "P47" | IOSTANDARD = LVTTL ;
NET "INDICATION_MUXtoMC<0>" LOC = "P59" | IOSTANDARD = LVTTL ;
NET "LED_Z0" LOC = "P72" | IOSTANDARD = LVTTL ;
NET "LED_Z1" LOC = "P50" | IOSTANDARD = LVTTL ;
NET "LED_Z2" LOC = "P55" | IOSTANDARD = LVTTL ;
###############LVDS-Kanäle###############################
NET "LVDS_Nr" LOC = "P88" | IOSTANDARD = LVDSEXT_25 ;#r: receive
NET "LVDS_Ns" LOC = "P90" | IOSTANDARD = LVDSEXT_25 ;#s: send
NET "LVDS_Pr" LOC = "P87" | IOSTANDARD = LVDSEXT_25 ;
NET "LVDS_Ps" LOC = "P89" | IOSTANDARD = LVDSEXT_25 ;
################TASTER####################################
NET "BUTTON" LOC = "P21" | IOSTANDARD = LVTTL ;#USERSTART
--Topmodule -File:
**********************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity TOPMODULE is
generic(
WAIT_WIDTH_USERSTART : positive := 28;
WAIT_WIDTH_MC_READY : positive := 10;
CNT_WIDTH : positive := 25
);
Port ( CLK_IN : in STD_LOGIC;
MC_READY : in STD_LOGIC;
BUTTON : in std_logic;
LVDS_Pr : in STD_LOGIC; --receive
LVDS_Nr : in STD_LOGIC;
LVDS_Ps : out STD_LOGIC;--send
LVDS_Ns : out STD_LOGIC;
LED_Z0 : out STD_LOGIC;
LED_Z1 : out STD_LOGIC;
LED_Z2 : out STD_LOGIC;
DATA_toMC : out STD_LOGIC_VECTOR (3 downto 0);
MC_READ : out STD_LOGIC;
CLK_fromMC : in std_logic;
INDICATION_MUXtoMC : out std_logic_vector(1 downto 0)
);
end TOPMODULE;
architecture Behavioral of TOPMODULE is
component STATE_MACHINE
port(CLKX1 : in std_logic;
USER_START : in std_logic;
ADDRESS_CONTROL_FINISH : in std_logic;
MC_READY : in std_logic;
BRAM1_EN_toMUX : out std_logic; --Ausgangssignale zu BRAM1
BRAM1_EN_SEND : out std_logic;
BRAM1_RESET_toMUX : out std_logic;
BRAM1_RESET_SEND : out std_logic;
BRAM2_EN_RECEIVE : out std_logic; --Ausgangssignale zu BRAM2
BRAM2_EN_toMUX : out std_logic;
BRAM2_RESET_toMUX : out std_logic;
BRAM2_WRITE_EN : out std_logic;
MUX_RESET : out std_logic;
DES_EN : out std_logic;
SER_NEN : out std_logic;
SER_RESET : out std_logic;
ADDR_CONTROL_RESET_NEN : out
std_logic;--ADDRESS_CONTROL_RESET_(and)NotENable
MC_READ : out std_logic;
LED_Z0 : out std_logic; --die LEDs signalisieren den aktuellen
Zustand
LED_Z2 : out std_logic--;
);
end component;
component ADDRESS_CONTROL
generic(
ADDRESS_WIDTH : positive := 10
);
Port ( CLKX1 : in std_logic;
RESET_NEN : in STD_LOGIC;
ADDR_BRAM1 : out STD_LOGIC_VECTOR (9 downto 0);
ADDR_BRAM2 : out STD_LOGIC_VECTOR (9 downto 0);
FINISH : out std_logic
);
end component;
component SER16to1
Port ( CLKX8 : in std_logic; --8facher Takt (bezogen auf den Takt des
16 Bit breiten Datenbus)
CLKX8_180 : in std_logic; --8facher Takt invertiert
RESET : in std_logic; --Reseteingang
NotENABLE : in std_logic;
DATA_PARALLEL : in std_logic_vector(15 downto 0);
ODATA_LVDSP : out std_logic;
ODATA_LVDSN : out std_logic);
end component;
component DES1to16
Port ( ENABLE : in std_logic; --mit DCM_LOCKED verbinden
IDATA_LVDSP : in std_logic;
IDATA_LVDSN : in std_logic;
CLKX8 : in STD_LOGIC;
CLKX8_180 : in STD_LOGIC;
CLKX1 : in STD_LOGIC;
DATA_OUT : out STD_LOGIC_VECTOR (15 downto 0)
);
end component;
component MUX
generic(
DATA_WIDTH: positive := 4;--Breite des Datenbusses
ADRESS_WIDTH_toMC: positive := 12;
CONTROL_WIDTH: positive := 2--Anzahl der Steuerleitungen
);
Port ( DATA1 : in STD_LOGIC_VECTOR (3 downto 0);--Daten von BRAM1
DATA2 : in STD_LOGIC_VECTOR (3 downto 0);--Daten von BRAM2
DATA_OUT : out STD_LOGIC_VECTOR (3 downto 0);--Datenbus zum
Mikrocontroller
ADRESS1 : out std_logic_vector(11 downto 0);--Adressbusse zu den
BRAMs
ADRESS2 : out std_logic_vector(11 downto 0);
RESET : in std_logic;--asynchrones Resetsignal von der
State-Machine
INDICATION : out STD_LOGIC_VECTOR(1 downto 0);--Kontrollbus
zum Mikrocontroller
CLK_extMC : in STD_LOGIC;--Auslesetakt für die BRAMs (vom
Mikrocontroller generiert)
CLK_fromMC
ut STD_LOGIC);
end component;
component BRAM_SEND
port(
DATA_toMUX : out std_logic_vector(3 downto 0); -- Port A 4-bit
Data Output
DATA_toSER : out std_logic_vector(15 downto 0); -- Port B
16-bit Data Output
ADDRESS_MUX: in std_logic_vector(11 downto 0); -- Port A 12-bit
Address Input
ADDRESS_SEND: in std_logic_vector(9 downto 0); -- Port B 10-bit
Address Input
CLK_MUX : in std_logic; -- Port A Clock
CLKX1 : in std_logic; -- Port B Clock
EN_toMUX : in std_logic; -- Port A RAM Enable Input
EN_SEND : in std_logic; -- PortB RAM Enable Input
RESET_toMUX : in std_logic; -- Port A Synchronous Set/Reset
Input
RESET_SEND : in std_logic -- Port B Synchronous Set/Reset Input
);
end component;
component BRAM_RECEIVE
port(
DATA_toMUX : out std_logic_vector(3 downto 0); -- Port A 4-bit
Data Output
DATA_fromDES : in std_logic_vector(15 downto 0); -- Port B
16-bit Data Intput
ADDRESS_MUX: in std_logic_vector(11 downto 0); -- Port A 12-bit
Address Input
ADDRESS_RECEIVE: in std_logic_vector(9 downto 0); -- Port B
10-bit Address Input
CLK_MUX : in std_logic; -- Port A Clock
CLKX1_PS : in std_logic; -- Port B Clock (PS: phase-shifted)
Verzögerung des DUTs
EN_toMUX : in std_logic; -- Port A RAM Enable Input
EN_RECEIVE : in std_logic; -- PortB RAM Enable Input
RESET_toMUX : in std_logic; -- Port A Synchronous Set/Reset
Input
WRITE_ENABLE : in std_logic
);
end component;
component GENERATE_CLOCK
Port ( CLKIN_IN : in std_logic; --Oszillator mit 66 MHz
(meltemi: P36)
CLKDV_OUT : out std_logic; --33 Mhz Takt
CLKFX_OUT : out std_logic; --264 MHz Takt
CLKFX180_OUT : out std_logic
);
end component;
signal CLKX1, CLKX8, CLKX8_180 : std_logic;
signal ADDRESS_CONTROL_FINISH, BRAM1_EN_SEND, BRAM1_RESET_toMUX,
BRAM1_RESET_SEND : std_logic;
signal BRAM2_EN_RECEIVE, BRAM2_RESET_toMUX, BRAM2_WRITE_EN, MUX_RESET :
std_logic;
signal DES_EN, SER_NEN, SER_RESET, ADDR_CONTROL_RESET_NEN : std_logic;
signal ADDR_BRAM1, ADDR_BRAM2 : std_logic_vector(9 downto 0);
signal DATA_toSER16to1, DATA_fromDES1to16 : std_logic_vector(15 downto
0);
signal DATA_toMUX_BRAM_S, DATA_toMUX_BRAM_R : std_logic_vector(3 downto
0);
signal ADDRESS_BRAM_SEND, ADDRESS_BRAM_RECEIVE : std_logic_vector(11
downto 0);
signal BRAM1_EN_toMUX, BRAM2_EN_toMUX : std_logic;
signal USERSTART : std_logic := '0';
signal CLK_fromMC_buffered : STD_LOGIC;
--Taster :
--Tatser1 :
signal SHIFT_PB1 : STD_LOGIC_VECTOR (3 downto 0) := "0000";
signal BUTTON_DEBOUNCED1 : std_logic := '0';
signal LEVEL1 : std_logic := '0';
--CLK-Indication :
signal CNT : std_logic_vector(CNT_WIDTH-1 downto 0) := (others => '0');
constant MAX_CNT : std_logic_vector(CNT_WIDTH-1 downto 0) := (others =>
'1');
signal LEVEL : std_logic := '0';
begin
inst_GC : GENERATE_CLOCK
port map(
CLKIN_IN => CLK_IN, --externer Takt
CLKDV_OUT => CLKX1, --33 Mhz Takt
CLKFX_OUT => CLKX8, --264 MHz Takt
CLKFX180_OUT => CLKX8_180--CLKX8 um 180° phasenverschoben
);
inst_SM : STATE_MACHINE
port map(
CLKX1 => CLKX1,
USER_START => USERSTART,
ADDRESS_CONTROL_FINISH => ADDRESS_CONTROL_FINISH,
MC_READY => MC_READY,--MC herausgenommen
BRAM1_EN_toMUX => BRAM1_EN_toMUX, --Ausgangssignale zu BRAM1
BRAM1_EN_SEND => BRAM1_EN_SEND,
BRAM1_RESET_toMUX => BRAM1_RESET_toMUX,
BRAM1_RESET_SEND => BRAM1_RESET_SEND,
BRAM2_EN_RECEIVE => BRAM2_EN_RECEIVE, --Ausgangssignale zu BRAM2
BRAM2_EN_toMUX => BRAM2_EN_toMUX,
BRAM2_RESET_toMUX => BRAM2_RESET_toMUX,
BRAM2_WRITE_EN => BRAM2_WRITE_EN,
MUX_RESET => MUX_RESET,
DES_EN => DES_EN,
SER_NEN => SER_NEN,
SER_RESET => SER_RESET,
ADDR_CONTROL_RESET_NEN =>
ADDR_CONTROL_RESET_NEN,--ADDRESS_CONTROL_RESET_(and)NotENable
MC_READ => MC_READ,
LED_Z0 => LED_Z0, --die LEDs signalisieren den aktuellen Zustand
LED_Z2 => LED_Z2
);
inst_AC : ADDRESS_CONTROL
port map(
CLKX1 => CLKX1,
RESET_NEN => ADDR_CONTROL_RESET_NEN,
ADDR_BRAM1 => ADDR_BRAM1, --BRAM_SEND
ADDR_BRAM2 => ADDR_BRAM2, --BRAM_RECEIVE
FINISH => ADDRESS_CONTROL_FINISH
);
inst_SER : SER16to1
port map(
CLKX8 => CLKX8, --8facher Takt (bezogen auf den Takt des 16 Bit
breiten Datenbus)
CLKX8_180 => CLKX8_180, --8facher Takt invertiert
RESET => SER_RESET, --Reseteingang
NotENABLE => SER_NEN,
DATA_PARALLEL => DATA_toSER16to1,
ODATA_LVDSP => LVDS_Ps,
ODATA_LVDSN => LVDS_Ns
);
inst_DES : DES1to16
port map(
ENABLE => DES_EN, --mit DCM_LOCKED verbinden
IDATA_LVDSP => LVDS_Pr,
IDATA_LVDSN => LVDS_Nr,
CLKX8 => CLKX8,
CLKX8_180 => CLKX8_180,
CLKX1 => CLKX1,
DATA_OUT => DATA_fromDES1to16
);
inst_MUX : MUX
port map(
DATA1 => DATA_toMUX_BRAM_S,--Daten von BRAM1
DATA2 => DATA_toMUX_BRAM_R,--Daten von BRAM2
DATA_OUT => DATA_toMC,--Datenbus zum Mikrocontroller
ADRESS1 => ADDRESS_BRAM_SEND,--Adressbusse zu den BRAMs
ADRESS2 => ADDRESS_BRAM_RECEIVE,
RESET => MUX_RESET,--asynchrones Resetsignal von der State-Machine
INDICATION => INDICATION_MUXtoMC,--Kontrollbus zum
Mikrocontroller
CLK_extMC => CLK_fromMC--Auslesetakt für die BRAMs (vom
Mikrocontroller generiert)
);
inst_BRAM_S : BRAM_SEND --BRAM1
port map(
DATA_toMUX => DATA_toMUX_BRAM_S, -- Port A 4-bit Data Output
DATA_toSER => DATA_toSER16to1, -- Port B 16-bit Data Output
ADDRESS_MUX => ADDRESS_BRAM_SEND, -- Port A 12-bit Address Input
ADDRESS_SEND => ADDR_BRAM1, -- Port B 10-bit Address Input
CLK_MUX => CLK_fromMC_buffered, -- Port A Clock
CLKX1 => CLKX1, -- Port B Clock
EN_toMUX => BRAM1_EN_toMUX, -- Port A RAM Enable Input
EN_SEND => BRAM1_EN_SEND, -- PortB RAM Enable Input
RESET_toMUX => BRAM1_RESET_toMUX, -- Port A Synchronous
Set/Reset Input
RESET_SEND => BRAM1_RESET_SEND -- Port B Synchronous Set/Reset
Input
);
inst_BRAM_R : BRAM_RECEIVE
port map(
DATA_toMUX => DATA_toMUX_BRAM_R, -- Port A 4-bit Data Output
DATA_fromDES => DATA_fromDES1to16, -- Port B 16-bit Data
Intput
ADDRESS_MUX => ADDRESS_BRAM_RECEIVE, -- Port A 12-bit Address
Input
ADDRESS_RECEIVE => ADDR_BRAM2, -- Port B 10-bit Address Input
CLK_MUX => CLK_fromMC_buffered, -- Port A Clock
CLKX1_PS => CLKX1, -- Port B Clock (PS: phase-shifted)
Verzögerung des DUTs
EN_toMUX => BRAM2_EN_toMUX, -- Port A RAM Enable Input
EN_RECEIVE => BRAM2_EN_RECEIVE, -- PortB RAM Enable Input
RESET_toMUX => BRAM2_RESET_toMUX, -- Port A Synchronous
Set/Reset Input
WRITE_ENABLE => BRAM2_WRITE_EN
);
--CLK-Indication :
CLK_indication: process(CLKX1)
begin
if (CLKX1'event and CLKX1 = '1') then
if CNT = MAX_CNT then
LEVEL <= not LEVEL;
CNT <= (others => '0');
else
CNT <= CNT +1;
end if;
end if;
end process;
LED_Z1 <= LEVEL;
--LED_Z1 <= '1';
----Taster1 :
DEBOUNCE1: process(CLKX1)
begin
if (CLKX1'event and CLKX1 = '1') then
-- Use a shIFt register to filter switch contact bounce
SHIFT_PB1(2 downto 0) <= SHIFT_PB1(3 downto 1);
SHIFT_PB1(3) <= BUTTON;
if SHIFT_PB1(3 downto 0) = "0000" then
BUTTON_DEBOUNCED1 <= '0';
else
BUTTON_DEBOUNCED1 <= '1';
end if;
end if;
end process;
SWITCH1: process(BUTTON_DEBOUNCED1)
begin
if (BUTTON_DEBOUNCED1'event and BUTTON_DEBOUNCED1 = '1') then
LEVEL1 <= not LEVEL1;
end if;
end process;
USERSTART <= LEVEL1;
end Behavioral;
--GENERATE_CLOCK-FILE :
*********************************************************************************
library ieee;
use ieee.std_logic_1164.ALL;
use ieee.numeric_std.ALL;
library UNISIM;
use UNISIM.Vcomponents.ALL;
--konfiguriert für einen Eingangstakt der Frequenz 66 MHz
entity GENERATE_CLOCK is
port ( CLKIN_IN : in std_logic; --Oszillator mit 66 MHz
(meltemi: P36)
CLKDV_OUT : out std_logic; --33 Mhz Takt
CLKFX_OUT : out std_logic; --264 MHz Takt
CLKFX180_OUT : out std_logic
);-- = '1' -> DCM eingeschwungen
end GENERATE_CLOCK;
architecture BEHAVIORAL of GENERATE_CLOCK is
component BUFG
port ( I : in std_logic;
O : out std_logic);
end component;
component IBUFG
port ( I : in std_logic;
O : out std_logic);
end component;
-- Period Jitter (unit interval) for block DCM_INST = 0.17 UI
-- Period Jitter (Peak-to-Peak) for block DCM_INST = 0.63 ns
component DCM
generic( CLK_FEEDBACK : string := "1X";
CLKDV_DIVIDE : real := 2.0;
CLKFX_DIVIDE : integer := 1;
CLKFX_MULTIPLY : integer := 4; ---sonst 4 !!!
CLKIN_DIVIDE_BY_2 : boolean := FALSE;
CLKIN_PERIOD : real := 10.0;
CLKOUT_PHASE_SHIFT : string := "NONE";
DESKEW_ADJUST : string := "SYSTEM_SYNCHRONOUS";
DFS_FREQUENCY_MODE : string := "LOW";
DLL_FREQUENCY_MODE : string := "LOW";
DUTY_CYCLE_CORRECTION : boolean := TRUE;
FACTORY_JF : bit_vector := x"8080";
PHASE_SHIFT : integer := 0;
STARTUP_WAIT : boolean := FALSE;
DSS_MODE : string := "NONE");
port ( CLKIN : in std_logic;
CLKFB : in std_logic;
RST : in std_logic;
PSEN : in std_logic;
PSINCDEC : in std_logic;
PSCLK : in std_logic;
DSSEN : in std_logic;
CLK0 : out std_logic;
CLK90 : out std_logic;
CLK180 : out std_logic;
CLK270 : out std_logic;
CLKDV : out std_logic;
CLK2X : out std_logic;
CLK2X180 : out std_logic;
CLKFX : out std_logic;
CLKFX180 : out std_logic;
STATUS : out std_logic_vector (7 downto 0);
LOCKED : out std_logic;
PSDONE : out std_logic);
end component;
signal CLKDV_BUF : std_logic;
signal CLKFB_IN : std_logic;
signal CLKFX_BUF : std_logic;
signal CLKFX180_BUF : std_logic;
signal CLKIN_IBUFG : std_logic;
signal CLK0_BUF : std_logic;
signal GND1 : std_logic;
begin
GND1 <= '0';
CLKDV_BUFG_INST : BUFG
port map (I=>CLKDV_BUF,
O=>CLKDV_OUT);
CLKFX_BUFG_INST : BUFG
port map (I=>CLKFX_BUF,
O=>CLKFX_OUT);
CLKFX180_BUFG_INST : BUFG
port map (I=>CLKFX180_BUF,
O=>CLKFX180_OUT);
CLKIN_IBUFG_INST : IBUFG
port map (I=>CLKIN_IN,
O=>CLKIN_IBUFG);
CLK0_BUFG_INST : BUFG
port map (I=>CLK0_BUF,
O=>CLKFB_IN);
DCM_INST : DCM
generic map( CLK_FEEDBACK => "1X",
CLKDV_DIVIDE => 2.0,
CLKFX_DIVIDE => 1,
CLKFX_MULTIPLY => 4,
CLKIN_DIVIDE_BY_2 => FALSE,
CLKIN_PERIOD => 15.1515,
CLKOUT_PHASE_SHIFT => "NONE",
DESKEW_ADJUST => "SYSTEM_SYNCHRONOUS",
DFS_FREQUENCY_MODE => "HIGH",
DLL_FREQUENCY_MODE => "LOW",
DUTY_CYCLE_CORRECTION => TRUE,
FACTORY_JF => x"8080",
PHASE_SHIFT => 0,
STARTUP_WAIT => TRUE)
port map (CLKFB=>CLKFB_IN,
CLKIN=>CLKIN_IBUFG,
DSSEN=>GND1,
PSCLK=>GND1,
PSEN=>GND1,
PSINCDEC=>GND1,
RST=>'0',
CLKDV=>CLKDV_BUF,
CLKFX=>CLKFX_BUF,
CLKFX180=>CLKFX180_BUF,
CLK0=>CLK0_BUF,
CLK2X=>open,
CLK2X180=>open,
CLK90=>open,
CLK180=>open,
CLK270=>open,
LOCKED=>open,
PSDONE=>open,
STATUS=>open);
end BEHAVIORAL;
--STATE_MACHINE-FILE :
************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity STATE_MACHINE is
port(CLKX1 : in std_logic;
USER_START : in std_logic;
ADDRESS_CONTROL_FINISH : in std_logic;
MC_READY : in std_logic;
BRAM1_EN_toMUX : out std_logic; --Ausgangssignale zu BRAM1
BRAM1_EN_SEND : out std_logic;
BRAM1_RESET_toMUX : out std_logic;
BRAM1_RESET_SEND : out std_logic;
BRAM2_EN_RECEIVE : out std_logic; --Ausgangssignale zu BRAM2
BRAM2_EN_toMUX : out std_logic;
BRAM2_RESET_toMUX : out std_logic;
BRAM2_WRITE_EN : out std_logic;
MUX_RESET : out std_logic;
DES_EN : out std_logic;
SER_NEN : out std_logic;
SER_RESET : out std_logic;
ADDR_CONTROL_RESET_NEN : out
std_logic;--ADDRESS_CONTROL_RESET_(and)NotENable
MC_READ : out std_logic;
LED_Z0 : out std_logic;
LED_Z2 : out std_logic--;
);
end STATE_MACHINE;--Moore-Automat
architecture Behavioral of STATE_MACHINE is
type STATES is (Z0, Z1, Z2);
signal STATE: STATES := Z0;
signal NEXT_S: STATES := Z0;
signal STATE_Z0, STATE_Z2 : std_logic;
begin
STATE_MEMORY: process(CLKX1)
begin
if CLKX1'event and CLKX1 = '1' then--eventuell Flanke ändern?
STATE <= NEXT_S;
end if;
end process;
DEFINE_NEXT_STATE: process(USER_START, ADDRESS_CONTROL_FINISH, MC_READY
,STATE)
begin
case STATE is
when Z0 => if USER_START = '1' then
NEXT_S <= Z1;
else
NEXT_S <=Z0;
end if;
when Z1 => if ADDRESS_CONTROL_FINISH = '1' then
NEXT_S <= Z2;
else
NEXT_S <=Z1;
end if;
when Z2 => if MC_READY = '1' then
NEXT_S <= Z0;
else
NEXT_S <=Z2;
end if;
end case;
end process;
SET_OUTPUTS: process(STATE)
begin
case STATE is
when Z0 => BRAM1_EN_toMUX <= '0';
BRAM1_EN_SEND <= '0';
BRAM1_RESET_toMUX <= '1';
BRAM1_RESET_SEND <= '1';
BRAM2_EN_RECEIVE <= '0';
BRAM2_EN_toMUX <= '0';
BRAM2_RESET_toMUX <= '1';
BRAM2_WRITE_EN <= '0';
MUX_RESET <= '1';
DES_EN <= '0';
SER_NEN <= '1';
SER_RESET <= '1';
ADDR_CONTROL_RESET_NEN <= '1';
MC_READ <= '0';
when Z1 => BRAM1_EN_toMUX <= '0';
BRAM1_EN_SEND <= '1';
BRAM1_RESET_toMUX <= '1';
BRAM1_RESET_SEND <= '0';
BRAM2_EN_RECEIVE <= '1';
BRAM2_EN_toMUX <= '0';
BRAM2_RESET_toMUX <= '1';
BRAM2_WRITE_EN <= '1';
MUX_RESET <= '1';
DES_EN <= '1';
SER_NEN <= '0';
SER_RESET <= '0';
ADDR_CONTROL_RESET_NEN <= '0';
MC_READ <= '0';
when Z2 => BRAM1_EN_toMUX <= '1';
BRAM1_EN_SEND <= '0';
BRAM1_RESET_toMUX <= '0';
BRAM1_RESET_SEND <= '1';--eventuall ändern !
BRAM2_EN_RECEIVE <= '0';
BRAM2_EN_toMUX <= '1';
BRAM2_RESET_toMUX <= '0';
BRAM2_WRITE_EN <= '0';
MUX_RESET <= '0';
DES_EN <= '0';
SER_NEN <= '1';
SER_RESET <= '1';
ADDR_CONTROL_RESET_NEN <= '1';
MC_READ <= '1';
end case;
end process;
INDICATE_STATE: process(STATE)
begin
case STATE is
when Z0 => STATE_Z0 <= '1';
STATE_Z2 <= '0';
when Z1 => STATE_Z0 <= '0';
STATE_Z2 <= '0';
when Z2 => STATE_Z0 <= '0';
STATE_Z2 <= '1';
end case;
end process;
LED_Z0 <= STATE_Z0; --die LEDs signalisieren den aktuellen Zustand
LED_Z2 <= STATE_Z2;
end Behavioral;
ADDRESS_CONTROL-FILE :
********************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
entity ADDRESS_CONTROL is
generic(
ADDRESS_WIDTH : positive := 10
);
Port ( CLKX1 : in std_logic;
RESET_NEN : in STD_LOGIC;
ADDR_BRAM1 : out STD_LOGIC_VECTOR (ADDRESS_WIDTH-1 downto
0);
ADDR_BRAM2 : out STD_LOGIC_VECTOR (ADDRESS_WIDTH-1 downto
0);
FINISH : out std_logic
);
end ADDRESS_CONTROL;
architecture Behavioral of ADDRESS_CONTROL is
signal FINISH_FLAG : std_logic;
signal CNT : std_logic_vector(ADDRESS_WIDTH-1 downto 0);
constant MAX_ADDRESS : std_logic_vector(ADDRESS_WIDTH-1 downto 0) :"1111111111";
begin
CHANGE_ADDRESS: process(CLKX1)
begin
if CLKX1'event and CLKX1 = '1' then
if RESET_NEN = '1' then
CNT <= (others => '0');
FINISH_FLAG <= '0';
else
if CNT = MAX_ADDRESS then
FINISH_FLAG <= '1';
else
CNT <= CNT + 1;
FINISH_FLAG <= '0';
end if;
end if;
end if;
end process;
ADDR_BRAM1 <= CNT;
ADDR_BRAM2 <= CNT;
FINISH <= FINISH_FLAG;
end Behavioral;
--SER-FILE :
****************************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity SER16to1 is
Port ( CLKX8 : in std_logic; --8facher Takt (bezogen auf den Takt des
16 Bit breiten Datenbus)
CLKX8_180 : in std_logic; --8facher Takt invertiert
RESET : in std_logic; --Reseteingang
NotENABLE : in std_logic;
DATA_PARALLEL : in std_logic_vector(15 downto 0);
ODATA_LVDSP : out std_logic;
ODATA_LVDSN : out std_logic);
end SER16to1;
architecture Behavioral of SER16to1 is
signal DATA_POS_EDGE, DATA_NEG_EDGE, DOUBLE_R_DATA : std_logic;
signal CNT, CNT0: std_logic_vector(2 downto 0):= (others => '0');
begin
OFDDRRSE_inst : FDDRRSE --double datarate
port map (
Q => DOUBLE_R_DATA, -- Data output (connect directly to
top-level port)
C0 => CLKX8, -- 0 degree clock input
C1 => CLKX8_180, -- 180 degree clock input
--Commonly, the Digital Clock Manager
--(DCM) generates the two clock signals by mirroring an
--incoming signal, then shifting it 180 degrees. This approach
--ensures minimal skew between the two signals.
CE => '1', -- Clock enable input
D0 => DATA_POS_EDGE, -- Posedge data input
D1 => DATA_NEG_EDGE, -- Negedge data input
R => NotENABLE, -- Synchronous reset input
S => '0' -- Synchronous preset input
);
OBUFDS_inst : OBUFDS --LVDS-Output
generic map(
IOSTANDARD => "LVDSEXT_25")--Standard: siehe Datasheet S.62(Tabelle
36)
port map (
O => ODATA_LVDSP, -- Diff_p output (connect directly to
top-level port)
OB => ODATA_LVDSN, -- Diff_n output (connect directly to
top-level port)
I => DOUBLE_R_DATA -- Buffer input
);
--***********************************************************************
-- Prozess: COUNT
--
--Der Prozess fungiert als taktsynchroner Zähler von 0 bis 7 mit
--synchronem Reseteingang(highaktiv), der den Zählerstand auf Null
setzt.
--
-- Input (->
: CLK8X, RESET--***********************************************************************
COUNT: process(CLKX8_180)
begin
if(CLKX8_180'event and CLKX8_180='1') then
if RESET = '1' then
CNT <= (others => '0');
CNT0 <= (others => '0');
else
CNT <= CNT + '1';
CNT0 <= CNT;
end if;
end if;
end process;
--***********************************************************************
-- Prozess: MULTIPLEX
--
--Der Prozess legt in Abhängigkeit des Zählerstandes in CNT zwei
--aufeinanderfolgende Bits des parallelen Datenbusses DATA_PARALLEL an
--DATA_POS_EDGE und DATA_NEG_EDGE an.
--
-- Input (->
: CLK8X_180, DATA_PARALLEL, CNT-- Output(<-): DATA_POS_EDGE, DATA_NEG_EDGE
--***********************************************************************
MULTIPLEX: process(CLKX8_180)
begin
if(CLKX8_180'event and CLKX8_180='1') then
if(CNT0 = 0) then
DATA_POS_EDGE <= DATA_PARALLEL(0);--eventuell Reihenfolge aus
SERDES-File verwenden
DATA_NEG_EDGE <= DATA_PARALLEL(1);
elsif(CNT0 = 1) then
DATA_POS_EDGE <= DATA_PARALLEL(2);
DATA_NEG_EDGE <= DATA_PARALLEL(3);
elsif(CNT0 = 2) then
DATA_POS_EDGE <= DATA_PARALLEL(4);
DATA_NEG_EDGE <= DATA_PARALLEL(5);
elsif(CNT0 = 3) then
DATA_POS_EDGE <= DATA_PARALLEL(6);
DATA_NEG_EDGE <= DATA_PARALLEL(7);
elsif(CNT0 = 4) then
DATA_POS_EDGE <= DATA_PARALLEL(8);
DATA_NEG_EDGE <= DATA_PARALLEL(9);
elsif(CNT0 = 5) then
DATA_POS_EDGE <= DATA_PARALLEL(10);
DATA_NEG_EDGE <= DATA_PARALLEL(11);
elsif(CNT0 = 6) then
DATA_POS_EDGE <= DATA_PARALLEL(12);
DATA_NEG_EDGE <= DATA_PARALLEL(13);
else
DATA_POS_EDGE <= DATA_PARALLEL(14);
DATA_NEG_EDGE <= DATA_PARALLEL(15);
end if;
end if;
end process;--nach dem Reset wird die seriellen Daten mit CLK8X/2
verzögert ausgegeben
end Behavioral;
--DES-FILE :
****************************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
-- Die Daten werden nach 2 Perioden von CLKX1 an DATA_OUT ausgegeben
library UNISIM;
use UNISIM.VComponents.all;
entity DES1to16 is
Port ( ENABLE : in std_logic; --mit DCM_LOCKED verbinden
IDATA_LVDSP : in std_logic;
IDATA_LVDSN : in std_logic;
CLKX8 : in STD_LOGIC;
CLKX8_180 : in STD_LOGIC;
CLKX1 : in STD_LOGIC;
DATA_OUT : out STD_LOGIC_VECTOR (15 downto 0));
end DES1to16;
architecture Behavioral of DES1to16 is
signal DOUBLE_RATE_DATA_DES, DATA_NEG_EDGE, DATA_POS_EDGE : std_logic;
signal DD2 : std_logic_vector(15 downto 0);
signal DD1 : std_logic_vector(13 downto 0);
begin
IBUFDS_inst : IBUFDS
generic map (
IOSTANDARD => "LVDSEXT_25")
port map (
O => DOUBLE_RATE_DATA_DES, -- Clock buffer output
I => IDATA_LVDSP, -- Diff_p clock buffer input (connect directly
to top-level port)
IB => IDATA_LVDSN -- Diff_n clock buffer input (connect directly
to top-level port)
);
double_data_rate1: process(CLKX8)
begin
if CLKX8'event and CLKX8 = '1' then
DATA_POS_EDGE <= DOUBLE_RATE_DATA_DES;
end if;
end process;
double_data_rate2: process(CLKX8_180)
begin
if CLKX8_180'event and CLKX8_180 = '1' then
DATA_NEG_EDGE <= DOUBLE_RATE_DATA_DES;
end if;
end process;
process(CLKX8_180) begin
if(CLKX8_180'event and CLKX8_180='1') then
DD2(15) <= DATA_POS_EDGE;
DD2(14) <= DATA_NEG_EDGE;
DD2(13) <= DD2(15);
DD2(12) <= DD2(14);
DD2(11) <= DD2(13);
DD2(10) <= DD2(12);
DD2(9) <= DD2(11);
DD2(8) <= DD2(10);
DD2(7) <= DD2(9);
DD2(6) <= DD2(8);
DD2(5) <= DD2(7);
DD2(4) <= DD2(6);
DD2(3) <= DD2(5);
DD2(2) <= DD2(4);
DD2(1) <= DD2(3);
DD2(0) <= DD2(2);
end if;
end process;
process(CLKX1) begin
if(CLKX1'event and CLKX1 = '1') then
DD1 <= DD2(15 downto 2);
end if;
end process;
process(CLKX1) begin
if(CLKX1'event and CLKX1 = '1') then
if ENABLE = '1' then
DATA_OUT <= DD2(1 downto 0) & DD1;
else
DATA_OUT <= (others => '0');
end if;
end if;
end process;
end Behavioral;
--MUX-FILE :
****************************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity MUX is
generic(
DATA_WIDTH: positive := 4;--Breite des Datenbusses
ADRESS_WIDTH_toMC: positive := 12;
CONTROL_WIDTH: positive := 2--Anzahl der Steuerleitungen
);
Port ( DATA1 : in STD_LOGIC_VECTOR (DATA_WIDTH-1 downto 0);--Daten
von BRAM1
DATA2 : in STD_LOGIC_VECTOR (DATA_WIDTH-1 downto 0);--Daten
von BRAM2
DATA_OUT : out STD_LOGIC_VECTOR (DATA_WIDTH-1 downto
0);--Datenbus zum Mikrocontroller
ADRESS1 : out std_logic_vector(ADRESS_WIDTH_toMC-1 downto
0);--Adressbusse zu den BRAMs
ADRESS2 : out std_logic_vector(ADRESS_WIDTH_toMC-1 downto 0);
RESET : in std_logic;--asynchrones Resetsignal von der
State-Machine
INDICATION : out STD_LOGIC_VECTOR(CONTROL_WIDTH-1 downto
0);--Kontrollbus zum Mikrocontroller
CLK_extMC : in STD_LOGIC;--Auslesetakt für die BRAMs (vom
Mikrocontroller generiert)
CLK_fromMC
ut STD_LOGIC);
end MUX;
architecture Behavioral of MUX is
signal CHOOSE: std_logic := '0';
signal ADRESS : std_logic_vector(ADRESS_WIDTH_toMC-1 downto 0);
signal CLK_MC : std_logic;
signal DATA_OUTs : std_logic_vector(DATA_WIDTH-1 downto 0);
constant MAX_ADRESS : std_logic_vector(ADRESS_WIDTH_toMC-1 downto 0) :"111111111111";--:= (others => '1');
begin
IBUFG_inst : IBUFG
generic map (
IOSTANDARD => "LVTTL")--Vmax = 3,3 V
port map (
O => CLK_MC, -- Clock buffer output
I => CLK_extMC -- Clock buffer input (connect directly to
top-level port)
);
COUNT: process(RESET,CLK_MC)
begin
if RESET = '1' then
ADRESS <= (others => '0'); --eventuell auf 2 oder 3 setzen
(Verzögerung des DES)
INDICATION <= "00";
CHOOSE <= '0';
DATA_OUTs <= "0000";
elsif CLK_MC'event and CLK_MC = '1' then
if ADRESS = MAX_ADRESS and CHOOSE = '1' then
INDICATION <= "11";
elsif CHOOSE = '1' then
INDICATION <= "10";
ADRESS <= ADRESS + 1;
DATA_OUTs <= DATA2;
CHOOSE <= not CHOOSE;
elsif CHOOSE = '0' then
INDICATION <= "01";
DATA_OUTs <= DATA1;
CHOOSE <= not CHOOSE;
end if;
end if;
end process;
ADRESS1 <= ADRESS;
ADRESS2 <= ADRESS;
DATA_OUT <= DATA_OUTs;
CLK_fromMC <= CLK_MC;
end Behavioral;
--BRAM_SEND-FILE :
*****************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity BRAM_SEND is
port(
DATA_toMUX : out std_logic_vector(3 downto 0); -- Port A 4-bit
Data Output
DATA_toSER : out std_logic_vector(15 downto 0); -- Port B
16-bit Data Output
ADDRESS_MUX: in std_logic_vector(11 downto 0); -- Port A 12-bit
Address Input
ADDRESS_SEND: in std_logic_vector(9 downto 0); -- Port B 10-bit
Address Input
CLK_MUX : in std_logic; -- Port A Clock
CLKX1 : in std_logic; -- Port B Clock
EN_toMUX : in std_logic; -- Port A RAM Enable Input
EN_SEND : in std_logic; -- PortB RAM Enable Input
RESET_toMUX : in std_logic; -- Port A Synchronous Set/Reset
Input
RESET_SEND : in std_logic -- Port B Synchronous Set/Reset Input
);
end BRAM_SEND;
architecture Behavioral of BRAM_SEND is
begin
RAMB16_S4_S18_instBRAM_S : RAMB16_S4_S18
generic map (
INIT_A => X"0", -- Value of output RAM registers on Port A at
startup
INIT_B => "000000000000000000", -- Value of output RAM registers
on Port B at startup
SRVAL_A => X"0", -- Port A ouput value upon SSR assertion
SRVAL_B => "000000000000000000", -- Port B ouput value upon SSR
assertion
WRITE_MODE_A => "WRITE_FIRST", -- WRITE_FIRST, READ_FIRST or
NO_CHANGE
WRITE_MODE_B => "WRITE_FIRST", -- WRITE_FIRST, READ_FIRST or
NO_CHANGE
SIM_COLLISION_CHECK => "ALL", -- "NONE", "WARNING",
"GENERATE_X_ONLY", "ALL
-- The following INIT_xx declarations specify the initial
contents of the RAM
-- Port A Address 0 to 1023, Port B Address 0 to 255
INIT_00 =>
X"aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa",
INIT_01 =>
X"31A24DB059A566389894651BBD99BD2D8C9B354390CB86B5E70923CC10B65204",
INIT_02 =>
X"B75A641ACB7C72335E48B321BA380BC5AE9283A6251BEA66393419843808728D",
INIT_03 =>
X"3D2602D4EB565E4BD3ED9E420A33DC4880330B8BE847CCD78EA28B0D1629203B",
INIT_04 =>
X"7B584C96B3261E267E525534B3690D7A2AD1CC72E9BEB9DC5AE412A0D3E34174",
INIT_05 =>
X"4764D5C1BA875991B1B88A0DC825861D6714624105DBEEC93E9559134288753B",
INIT_06 =>
X"2A24E99ECED52732D58D25C5872420D4D2B6DC080B272BEA253E5AA815B2AA5E",
INIT_07 =>
X"A9EAB4871BD31ED9E7ACA6A2A562D3997107CE0748D5273B21A54A715116623A",
INIT_08 =>
X"0E8D512E0DDDA220348A7EC887150339A019A1CADA6B6C67C646B272C65B3945",
INIT_09 =>
X"47658CE4977E28C8BA23A832911095B56EAD0D46DE2E6D6A23B0D6A022B798C8",
INIT_0A =>
X"6D5D528AC725EB0D5AC9AA396A985E2041340DCCE61726EA3E62AD8796790D74",
INIT_0B =>
X"A63A2C98BD68A190ECE31E3705A9378C9D1E8552B3E7E5EE00A8D013C727A363",
INIT_0C =>
X"825E50D3C337E391D285B3E810E3A0D7685653D94D3E71908B1A0B41E592532B",
INIT_0D =>
X"37BBD94017A3516B4967BD75065601C1A07433BCD239DE86D92D4DA53D55B981",
INIT_0E =>
X"3E764373E02864893E1301E208892D2569D1ED0979D06EC0000928245A49AA11",
INIT_0F =>
X"AEA8387C19D3BAD3DED01AE68780851E039D6569CD94656616126E516764E078",
INIT_10 =>
X"9107D66D37276715944658B74A886219E8245299D83648117887622ACD2C35C5",
INIT_11 =>
X"397370A02C1787D6B595D4A5AC755CBE31E689D3051A08405ECC1E99030855C1",
INIT_12 =>
X"7331991EA02E2DEA3D652D24661C90E9D16940AA1AAE91399003462DD631AC94",
INIT_13 =>
X"A2CB044E7A59C17279009084672932CC3533E4EBED516AC7721ECBD266883CD1",
INIT_14 =>
X"A1765046C93423316DD2B122D28AD0DCDD103BA92EE602D8422012220C91032D",
INIT_15 =>
X"4592C5C36758B8D5D1C023E6382A362A9D368B2D4A55B635A832D51AA42728CE",
INIT_16 =>
X"EE8C72A89284A695C3D69DB5902E5319A2EA837D7609ACA4AA6CA489B7D302B1",
INIT_17 =>
X"5C3E3E9E9C0878C8AC6ECBE615836CCB43C1A5E4603224A7B01C4D30BA613848",
INIT_18 =>
X"70CE6A81349A33784ED013CDB6E62C469B471315970CB17B7589025586833A6C",
INIT_19 =>
X"05540E35E27C1277A11C0E6D17D114926B534032D816C57B7B11B524306498ED",
INIT_1A =>
X"708D82706D0B19581D1A8E58BCE5D5296C61CA6022E55BDD1DD16162094D4EED",
INIT_1B =>
X"2A693B87804ABE0A13AA3AB724B2A791C18DA76921DC35228D5EC1D9763C6725",
INIT_1C =>
X"D990AB41C6BD350363DB64D013484D6A59A0065A6DE67C00A7A256C28001D80B",
INIT_1D =>
X"E820A2025B1818A1A471AC876C288829A0594A85445B1B7834C73D5434DEC9E5",
INIT_1E =>
X"5247B680E5856510890DEB25C1835930256A2CEE12857D397DDE185EB277186D",
INIT_1F =>
X"BA60A017C650389739C753904943A841538E0670A65E83AC4043790C30E6669A",
INIT_20 =>
X"246C9E9DCB5D2D4CC66AA13C65AC49401B640926975ED881D5BE04838EA68123",
INIT_21 =>
X"3B98B3398E27C17667801A7AB02CA95E8756A83B02A24CD777936336AB82B0B7",
INIT_22 =>
X"EAB1A46DD0A426D85C40E307D858ADC1608B8CCDECD0CDC508129ED37712EA08",
INIT_23 =>
X"906539C37E94749A9EE3587351CB4DD87E382834ACABCB5C1B805D840C3C22A0",
INIT_24 =>
X"23BBD272324592E18081970242A3BA026693A37DA93CD1AC2CB3A7A8186951B5",
INIT_25 =>
X"BA4CD0D6ABC1C9948551DAA39CDA85BE7D666853B026573D5A6149D83C83230B",
INIT_26 =>
X"E82DE897419589BE836419AC18918889C2D9A1EACDE94ABD93E92A845B9D6C00",
INIT_27 =>
X"6061B4CDA55B0B32779A270D19D8AA0531A0C89BA1E17A4016A002ADD2235777",
INIT_28 =>
X"9CB86AED9549A707235322D3C5463796DE311DC541AB2CD0912CDE44B8DDCE71",
INIT_29 =>
X"B43024155B29AC819D78944DA8574EED8A0E357072CEE0916AE57D686471EE3C",
INIT_2A =>
X"DD6C8048AE468CD92990C481D7C1EB6ED8681E022A608828D190B171463592C4",
INIT_2B =>
X"11ED653750DC76D8B653769DE776DCA4279A0DC428ABBE7934917B70EB280301",
INIT_2C =>
X"E679CCAB8C41DA9B3C68E037E62CCDA28AC3B962EAB29EB840A2A6648C910749",
INIT_2D =>
X"B3E18D758E9B71D12B73BB60DEB04C7951BC8D98BD468207AC1C06C1C04DB702",
INIT_2E =>
X"B2A81000A55C3B44BE30D942E9E6068DA8BE420998BE13EB6813059B03C71897",
INIT_2F =>
X"CD935A639274D03D83B1597E77BA72725D6543414079037792295D6D3ED02B6E",
INIT_30 =>
X"D3EB4528A277C02A53B405BAC8C291B90D86A83AAB0C0659A64D9A1722B2E7D6",
INIT_31 =>
X"A52B397960E0BB813D650DEDDE8934E6E7CC0CD738835C83BD0670310A89035E",
INIT_32 =>
X"3008A539DA3B2B0CC660AB7C3335BD7B4E7851EDBB1D82494D09EC22011E5C59",
INIT_33 =>
X"867370158A154636585837376EB91D7B5A3CA037846706665D94A89DC25E6590",
INIT_34 =>
X"52B23273DD410DD802E4D86211B4866A46D719B12187B7C9E21DC9D816CA43A9",
INIT_35 =>
X"494494A876798145C8D4C19D2C4828D2698C994356323A4A3444ED9D03D67DD9",
INIT_36 =>
X"3560BB813222D28614B06885C11BADB5481ADE0402EE672076DD96935A02EBAC",
INIT_37 =>
X"747673B5ACB7B60DC6B8BA3B99612D36B82D479503719C6C0BBE9E9BB0AB5C50",
INIT_38 =>
X"7E5B3037525C8044D085A4C294204C32786478A4D7D08D1C2E91486C5CCA00DA",
INIT_39 =>
X"72E9D33644047E9C975DC8EACD22A7C1BCA17E08AC475B5382D57712DD5B9495",
INIT_3A =>
X"E1ECEA16C38C7B91004A1DB9621DEBE7AAAA53319860BAB59736958915AE8110",
INIT_3B =>
X"06D6C17D9EA65C31707CE127460640BE179626E758C41A5D117E85748E79770D",
INIT_3C =>
X"46746B699DBE74D2582A669821825634984163E8C49B48494A71122A135CA2EC",
INIT_3D =>
X"E63E9317D9678103A976196BE59BB75816A6140C68E95221567E103CB184E5A1",
INIT_3E =>
X"55BADDCBB01705A7A516A9EE5261952711D56002138E300DC5A8068ACE48243E",
INIT_3F =>
X"DA2A16DDDC46264E61237022D97510AA6AC244EA0A66C6D62A0A934EDB27C9CB",
-- The next set of INITP_xx are for the parity bits
-- Port A Address 0 to 1023, Port B Address 0 to 255
INITP_00 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
INITP_01 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
-- Port A Address 1024 to 2047, Port B Address 256 to 511
INITP_02 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
INITP_03 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
-- Port A Address 2048 to 3071, Port B Address 512 to 767
INITP_04 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
INITP_05 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
-- Port A Address 3072 to 4095, Port B Address 768 to 1023
INITP_06 =>
X"0000000000000000000000000000000000000000000000000000000000000000",
INITP_07 =>
X"0000000000000000000000000000000000000000000000000000000000000000")
port map (
DOA => DATA_toMUX, -- Port A 4-bit Data Output
DOB => DATA_toSER, -- Port B 16-bit Data Output
DOPB => open, -- Port B 2-bit Parity Output
ADDRA => ADDRESS_MUX, -- Port A 12-bit Address Input
ADDRB => ADDRESS_SEND, -- Port B 10-bit Address Input
CLKA => CLK_MUX, -- Port A Clock
CLKB => CLKX1, -- Port B Clock
DIA => "1111", -- Port A 4-bit Data Input
DIB => "1111111111111111", -- Port B 16-bit Data Input
DIPB => "11", -- Port-B 2-bit parity Input
ENA => EN_toMUX, -- Port A RAM Enable Input
ENB => EN_SEND, -- PortB RAM Enable Input
SSRA => RESET_toMUX, -- Port A Synchronous Set/Reset Input
SSRB => RESET_SEND, -- Port B Synchronous Set/Reset Input
WEA => '0', -- Port A Write Enable Input
WEB => '0' -- Port B Write Enable Input
);
end Behavioral;
--BRAM_RECEIVE-FILE :
*************************************************************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
library UNISIM;
use UNISIM.VComponents.all;
entity BRAM_RECEIVE is
port(
DATA_toMUX : out std_logic_vector(3 downto 0); -- Port A 4-bit
Data Output
DATA_fromDES : in std_logic_vector(15 downto 0); -- Port B
16-bit Data Intput
ADDRESS_MUX: in std_logic_vector(11 downto 0); -- Port A 12-bit
Address Input
ADDRESS_RECEIVE: in std_logic_vector(9 downto 0); -- Port B
10-bit Address Input
CLK_MUX : in std_logic; -- Port A Clock
CLKX1_PS : in std_logic; -- Port B Clock (PS: phase-shifted)
Verzögerung des DUTs
EN_toMUX : in std_logic; -- Port A RAM Enable Input
EN_RECEIVE : in std_logic; -- PortB RAM Enable Input
RESET_toMUX : in std_logic; -- Port A Synchronous Set/Reset
Input
WRITE_ENABLE : in std_logic
);
end BRAM_RECEIVE;
architecture Behavioral of BRAM_RECEIVE is
begin
RAMB16_S4_S18_instBRAM_R : RAMB16_S4_S18
generic map (
INIT_A => X"0", -- Value of output RAM registers on Port A at
startup
INIT_B => "000000000000000000", -- Value of output RAM registers
on Port B at startup
SRVAL_A => X"0", -- Port A ouput value upon SSR assertion
SRVAL_B => "000000000000000000", -- Port B ouput value upon SSR
assertion
WRITE_MODE_A => "WRITE_FIRST", -- WRITE_FIRST, READ_FIRST or
NO_CHANGE
WRITE_MODE_B => "WRITE_FIRST", -- WRITE_FIRST, READ_FIRST or
NO_CHANGE
SIM_COLLISION_CHECK => "ALL", -- "NONE", "WARNING",
"GENERATE_X_ONLY", "ALL
-- The following INIT_xx declarations specify the initial
contents of the RAM
-- Port A Address 0 to 1023, Port B Address 0 to 255
INIT_00 =>
X"0B3590A1A174768987DBEA2C0A79BC3074933CE64B47E2B94839CABE379ECC71",
INIT_01 =>
X"757BD429738DA3B5A0B9494ED34701908332C6C3E6E7B76EA71E874BD75ACC6D",
INIT_02 =>
X"EE5D23172975488DE0E4C2CBB8107AC1E5944BB3DA3C0EB51318D2EA77138A60",
INIT_03 =>
X"579DB42A34470D66B69964892EE560544E7403D0487D9CA8010837BDAD631005",
INIT_04 =>
X"2399A631B2036C2EB2AC8E53ABE27DEDBC5188D14B3A3392557ABE3738321422",
INIT_05 =>
X"C8090DEA9B8B3E883E6489635B31E416468ED9687A5B358874275327AE030008",
INIT_06 =>
X"731B6C3308B38B6C0D326BB6D3E06770238588261AA155D9C1C4A5A3D13429C7",
INIT_07 =>
X"C918863BBECA868E6B3C85928E1CBDB6C38E6CA474D1679D512EC630D4714340",
INIT_08 =>
X"10566A52029BCCB3908DEDE5BCD66D8A0B9A8EA8209E86E46846C0B2809843B9",
INIT_09 =>
X"859E4E4D966313D79E3D6468BE556E5D2E86E7DED1E6BCA47B8A969969AB0356",
INIT_0A =>
X"5C8D1CEBB5E6E922785C707BED2633EB00BD915C902A056B5D06ED024914310A",
INIT_0B =>
X"550D1E5B4D9A10859202097C13533CDD9A9760BDB0D15C5A8404AC334CE35E32",
INIT_0C =>
X"134CB61CC92880A2A3A07045E587DECE9B9211B70944E4A2521E0940AC9113E3",
INIT_0D =>
X"EC82D7253C621B02A01DB21467D4A940EAE7491CE779070CDD17C0180DA6E7D6",
INIT_0E =>
X"7515EB022A8849ACA9A5C75251862103763144ADDB5AD12D599A57A120E4223B",
INIT_0F =>
X"24A096D40000CCBC1AAB8A64746725837098DE73BDBDC5324B670B7E29240533",
INIT_10 =>
X"D53CE81960775D439C74ED1D2754229BD42D46DDB9950CE2859B7B8241166535",
INIT_11 =>
X"A7A790B1BED30631AB5EC5B9BDB59EAB0CAC4E3D88EDDD6A1D182AADA54B3D4A",
INIT_12 =>
X"251CBA57185B5D4668AB34A466D81970AD1CEBE3AC0A187E3EB74187A6AC2CDA",
INIT_13 =>
X"7EEDE77DD75437D53E9207A92BBC67914A41A408566072127EA3B2DEB9D53C06",
INIT_14 =>
X"E0D1C599386389B6B54BA14C2B789E3A979811CB416933A62937ADD04EB189AB",
INIT_15 =>
X"464662DA8020A74474A87C2A52A407C41CE69291558C3937C34C86DACA5D2775",
INIT_16 =>
X"16A4643C5E97803607E2864BE61C5BA3014B497CE6128D18A6E77C582681A4A8",
INIT_17 =>
X"C6A37A99254E0DD0462D39BEC8034DCECCDAE6BB732134CD59878443E675A089",
INIT_18 =>
X"739914A602CD098E674EE2A54AD370EC953A4ADCB8D35EA090394325DC72B3CC",
INIT_19 =>
X"63A805EACD00E597D70C8AB5A681BA8294272390BE1C33BC6D1725509C23EDAC",
INIT_1A =>
X"B144B8C3B9B62748CE689E60B1C5A36DCE9E268D484B9154976ADAE407567E18",
INIT_1B =>
X"D4077889214A840C1A88E3CADE1A880EC65E97784521D515C37D575B0ABEA0E1",
INIT_1C =>
X"41403DE8985618E4D9D71A8856371D92C76DBA6E890929A021DCBA19051A60C4",
INIT_1D =>
X"6DACB5AA04550902A834C0B4031A04A6BC0DB5149DCA4BB2B9C7EE058586885C",
INIT_1E =>
X"DD3DE0AB96E7EED41168A0EA91E9D0715A48DA1C947D0383DD73A5BBECE04E38",
INIT_1F =>
X"6864B20C2D189816EC938CB71656978122D7781DA562ADB21CAED81AC5E2A53A",
INIT_20 =>
X"B2236BB14A6770370DED633D27ECB88C50622A3D7D77EB87A7E0379662DBCA98",
INIT_21 =>
X"289EC1D363D15E3B38601D02A13523815674B6B59335BB8815309DA65EC8381B",
INIT_22 =>
X"3EBAE3DE211C45498C23112D6765593CE3B6CE3C436C2D16A8E84BD7D4968C8B",
INIT_23 =>
X"DC91077562070CDC3DB6CECE4776AD272663D3467C2C162C06041C9017714181",
INIT_24 =>
X"2E1715E9C1C88E9A1D23B47E7EB3CA8C1D71DB28E4A5AE90D3E6A8D4D22D34E3",
INIT_25 =>
X"62C6327D4A632400B881AC5C789708D4434B51E6A006C582B3201913B742A06C",
INIT_26 =>
X"34BB8C76C978EC4BB4092BD8645E5B7B7BA4465D0D7038ADE925D8C17133E249",
INIT_27 =>
X"02E14B2469EA143810931358BBE92B3917948E026B91B8207BBD18CCB41B0536",
INIT_28 =>
X"B15BDDB22ED3989D6A58D0A63D1D1CEBDB8340E917447B31950EC8C347BB0D17",
INIT_29 =>
X"66052893E55DC45710706D8E3CBBD618CA2D67162DE6E8EE0AD2049BA2B46777",
INIT_2A =>
X"977285925069B73AC154A8ECE130AD752A897E48AC719623504164B83C76E0C5",
INIT_2B =>
X"89B4BE42541A847B0223922554D451094A635DE9544205622B36D293799B11A1",
INIT_2C =>
X"79B9CD247A7973EA5B762E132C955D0901C3AE80C74CB38CC58C8EBDD4DBE0E3",
INIT_2D =>
X"2C92774BAA711678215E1A62B54395664089B050AC764D18463D6E025888103D",
INIT_2E =>
X"A94C2C9C964974C62ADC092CC62AA01B53814B569290A0DE47C61E084D49BEDC",
INIT_2F =>
X"7BCBA95019C7D167B6A6BC80584578582C9389EE1757C4D506249C2BBAD9BE9C",
INIT_30 =>
X"81211DC8374AD2D8AAAE52068C386219D13749970D68D60B97CE1ED587786C32",
INIT_31 =>
X"CE616EA9658D4B3724958B4DCB9C7C308929AC8BA7C7B048BE8DD12D31E09A57",
INIT_32 =>
X"CAE0555E5C4AED028CE36ECE5CAEA51E5C790CD086D69513970B538117ED91D4",
INIT_33 =>
X"79EE0487DC6BC15325DE54501B4E6A86C36291590CAAC1D2300BB75E382066E0",
INIT_34 =>
X"48CC0E891D2146B3A1524249B64321EA29EA7A0ECB60066E7AA0CE99035A2B53",
INIT_35 =>
X"ACA96E9CDDDEB7CBE385827B481BC8454A6D97117CBAA7E64421E5D9E6C24946",
INIT_36 =>
X"4CC35D2066B48B1545E9393DC665EDC8EA458C9753EC40910935507B6A3C8582",
INIT_37 =>
X"5C0279A105462789E9AC29566D527E65324A26ECC674D31A3E8A7CED5ACD525D",
INIT_38 =>
X"888551B655EC6E6930C940B71B755A7E3EEC888729349B981ECEE2C4A9437681",
INIT_39 =>
X"A13539E0D35A409D50E07EACE4D86067D219A133EEA04CBBB8533356EAD153AC",
INIT_3A =>
X"D7AE7AA282818050A618B3321458D9190A9C8274402C18C7ED2901487E7D36B0",
INIT_3B =>
X"05B4E9256519A36309D976C500ADE14590D51A175C3D6B68351424C15A8462C5",
INIT_3C =>
X"9BB38E3071EE97A40156A5AD5DBE49E757E16D1BD195DEC7C7A7D79D488AB5AA",
INIT_3D =>
X"13539E09B9339078A1151363907AA370AB6A49B1366A6889DCD2AD14741DA981",
INIT_3E =>
X"765B0AED38804B7D11A8CC166E97A3A3676AE7A1C656A80116A394203D03D4B8",
INIT_3F =>
X"35061DB65D374DB727B6AA34C3ADA0E8D6A4A00489978B220AD0214A73C5D8E9")
port map (
DOA => DATA_toMUX, -- Port A 4-bit Data Output
DOB => open, -- Port B 16-bit Data Output
DOPB => open, -- Port B 2-bit Parity Output
ADDRA => ADDRESS_MUX, -- Port A 12-bit Address Input
ADDRB => ADDRESS_RECEIVE, -- Port B 10-bit Address Input
CLKA => CLK_MUX, -- Port A Clock
CLKB => CLKX1_PS, -- Port B Clock
DIA => "1111", -- Port A 4-bit Data Input
DIB => DATA_fromDES, -- Port B 16-bit Data Input
DIPB => "11", -- Port-B 2-bit parity Input
ENA => EN_toMUX, -- Port A RAM Enable Input
ENB => EN_RECEIVE, -- PortB RAM Enable Input
SSRA => RESET_toMUX, -- Port A Synchronous Set/Reset Input
SSRB => '0', -- Port B Synchronous Set/Reset Input
WEA => '0', -- Port A Write Enable Input
WEB => WRITE_ENABLE -- Port B Write Enable Input
);
end Behavioral;