Unable to generate schematic from netlist!!!! Please help!

[Samiran]

Hi All,

I am trying to generate schematic from a netlist using (File > Import

CDL...) option. As input of CDL In GUI form, I entered:

CDL Netlist File: /home/sdam/netlist
Output Library: Samiran
Output View Name: schematic
Reference Library List: analogLib

The Input netlist is as follows:

---------------------------------------------------------------------------------------------------------------
// Library name: Samiran
// Cell name: TestMyCkt
// View name: schematic
COUTPUT (net9 0) capacitor c=1p
RM2 (0 net9) resistor r=1/gdM2
RM1 (net9 0) resistor r=1/gdM1
VINPUT (net013 0) vsource mag=1m type=sine ampl=1m freq=1K
GM1 (net013 0 net9 0) vccs gm=gmM1
---------------------------------------------------------------------------------------------------------------

and then executed the CDL In. it says:
---------------------------------------------------------------------------------------------------------------
"CDL In has successfully imported the CDL netlist. Read log file
ni.log for more information."
---------------------------------------------------------------------------------------------------------------


But, no schematic view has been created!!!!!


Please please help me!!!! I am not able to figure it out............. :
(


Thanks & regards
Samiran

 

[Riad KACED]

Hi Samiran,

Have you read through the ni.log as advised ?
This log will help debugging your case. Please post if possible

BTW, you can look at the 'Design Data Translator’s Reference' Manual
from your Cadence installtion : $CDSHOME/doc/transref/transref.pdf

Regards,
Riad.