Type of resistence

L

Lanny

Guest
Hi

This resistence, R26 and R27:
http://www.123rf.com/photo_552275_simbol-on-electronic-board-close-up-selective-focus-on-simbol.html


What kind of resistance they are, and where can buy?


Regards
 
Lanny <nospam@noweb.xxx> wrote in message
news:4e37c645$0$15666$4fafbaef@reader2.news.tin.it...
Hi

This resistence, R26 and R27:

http://www.123rf.com/photo_552275_simbol-on-electronic-board-close-up-select
ive-focus-on-simbol.html
What kind of resistance they are, and where can buy?


Regards
So what do the numbers on the tops read as ?
x10 or more magnification required
 
On 8/2/2011 11:41 AM, Lanny wrote:
Hi

This resistence, R26 and R27:
http://www.123rf.com/photo_552275_simbol-on-electronic-board-close-up-selective-focus-on-simbol.html


What kind of resistance they are, and where can buy?
This type of resistors are SMD (Surface Mount Device) resistors.

You can buy these in any good electronic parts shop or online.
Digikey, Farnell


From the wiki: <https://secure.wikimedia.org/wikipedia/en/wiki/Resistor>

Surface mounted resistors are printed with numerical values in a code
related to that used on axial resistors. Standard-tolerance
surface-mount technology (SMT) resistors are marked with a three-digit
code, in which the first two digits are the first two significant digits
of the value and the third digit is the power of ten (the number of
zeroes). For example:
334 = 33 × 104 ohms = 330 kilohms
222 = 22 × 102 ohms = 2.2 kilohms
473 = 47 × 103 ohms = 47 kilohms
105 = 10 × 105 ohms = 1.0 megohm

Resistances less than 100 ohms are written: 100, 220, 470. The final
zero represents ten to the power zero, which is 1. For example:
100 = 10 × 100 ohm = 10 ohms
220 = 22 × 100 ohm = 22 ohms

Sometimes these values are marked as 10 or 22 to prevent a mistake.

Resistances less than 10 ohms have 'R' to indicate the position of the
decimal point (radix point). For example:
4R7 = 4.7 ohms
R300 = 0.30 ohms
0R22 = 0.22 ohms
0R01 = 0.01 ohms

Precision resistors are marked with a four-digit code, in which the
first three digits are the significant figures and the fourth is the
power of ten. For example:
1001 = 100 × 101 ohms = 1.00 kilohm
4992 = 499 × 102 ohms = 49.9 kilohm
1000 = 100 × 100 ohm = 100 ohms

000 and 0000 sometimes appear as values on surface-mount zero-ohm links,
since these have (approximately) zero resistance.

More recent surface-mount resistors are too small, physically, to permit
practical markings to be applied.
 
On Tue, 02 Aug 2011 14:12:10 +0200, tuinkabouter
<dachthetniet@net.invalid> wrote:

On 8/2/2011 11:41 AM, Lanny wrote:
Hi

This resistence, R26 and R27:
http://www.123rf.com/photo_552275_simbol-on-electronic-board-close-up-selective-focus-on-simbol.html


What kind of resistance they are, and where can buy?

This type of resistors are SMD (Surface Mount Device) resistors.

You can buy these in any good electronic parts shop or online.
Digikey, Farnell


From the wiki: <https://secure.wikimedia.org/wikipedia/en/wiki/Resistor

Surface mounted resistors are printed with numerical values in a code
related to that used on axial resistors. Standard-tolerance
surface-mount technology (SMT) resistors are marked with a three-digit
code, in which the first two digits are the first two significant digits
of the value and the third digit is the power of ten (the number of
zeroes).
There is also an SMD resistor marking scheme that uses a mix of numbers
and letters. E.g. 25C = 17.8K 1% and C25 is 10K 5%. A decoder for those
is available free at http://www.schematica.com/

--
Rich Webb Norfolk, VA
 
On 8/2/2011 3:22 PM, Rich Webb wrote:
On Tue, 02 Aug 2011 14:12:10 +0200, tuinkabouter
dachthetniet@net.invalid> wrote:

On 8/2/2011 11:41 AM, Lanny wrote:
Hi

This resistence, R26 and R27:
http://www.123rf.com/photo_552275_simbol-on-electronic-board-close-up-selective-focus-on-simbol.html


What kind of resistance they are, and where can buy?

This type of resistors are SMD (Surface Mount Device) resistors.

You can buy these in any good electronic parts shop or online.
Digikey, Farnell


From the wiki:<https://secure.wikimedia.org/wikipedia/en/wiki/Resistor

Surface mounted resistors are printed with numerical values in a code
related to that used on axial resistors. Standard-tolerance
surface-mount technology (SMT) resistors are marked with a three-digit
code, in which the first two digits are the first two significant digits
of the value and the third digit is the power of ten (the number of
zeroes).

There is also an SMD resistor marking scheme that uses a mix of numbers
and letters. E.g. 25C = 17.8K 1% and C25 is 10K 5%. A decoder for those
is available free at http://www.schematica.com
Perhaps you can update the wiki.
 
On Tue, 02 Aug 2011 09:22:52 -0400, Rich Webb wrote:

On Tue, 02 Aug 2011 14:12:10 +0200, tuinkabouter
dachthetniet@net.invalid> wrote:

On 8/2/2011 11:41 AM, Lanny wrote:
Hi

This resistence, R26 and R27:
http://www.123rf.com/photo_552275_simbol-on-electronic-board-close-up-
selective-focus-on-simbol.html


What kind of resistance they are, and where can buy?

This type of resistors are SMD (Surface Mount Device) resistors.

You can buy these in any good electronic parts shop or online. Digikey,
Farnell


From the wiki:
https://secure.wikimedia.org/wikipedia/en/wiki/Resistor

Surface mounted resistors are printed with numerical values in a code
related to that used on axial resistors. Standard-tolerance
surface-mount technology (SMT) resistors are marked with a three-digit
code, in which the first two digits are the first two significant digits
of the value and the third digit is the power of ten (the number of
zeroes).

There is also an SMD resistor marking scheme that uses a mix of numbers
and letters. E.g. 25C = 17.8K 1% and C25 is 10K 5%. A decoder for those
is available free at http://www.schematica.com/
Not to mention the SMD resistor marking scheme that saves on production
costs by not putting any marking on the thing at all.

--
www.wescottdesign.com
 
"Lanny" <nospam@noweb.xxx> wrote in message
news:4e37c645$0$15666$4fafbaef@reader2.news.tin.it...
Hi

This resistence, R26 and R27:
http://www.123rf.com/photo_552275_simbol-on-electronic-board-close-up-selective-focus-on-simbol.html


What kind of resistance they are, and where can buy?


Regards
As a matter of interest, why do you feel that these devices need replacement
?

Arfa
 
In article <fr1_p.125583$w86.51175@newsfe22.ams2>,
"Arfa Daily" <arfa.daily@ntlworld.com> wrote:

"Lanny" <nospam@noweb.xxx> wrote in message
news:4e37c645$0$15666$4fafbaef@reader2.news.tin.it...

Hi

This resistence, R26 and R27:
http://www.123rf.com/photo_552275_simbol-on-electronic-board-close-up-select
ive-focus-on-simbol.html


What kind of resistance they are, and where can buy?


Regards




As a matter of interest, why do you feel that these devices need replacement
?

Arfa
Seems to be two camps of respondents. But the picture seems to be a
generic stock photo, so I'm in the camp that believes the OP was just
inquiring in general about SMD.
 
What kind of resistance they are, and where can buy?


Regards




As a matter of interest, why do you feel that these devices need
replacement
?

Arfa

Seems to be two camps of respondents. But the picture seems to be a
generic stock photo, so I'm in the camp that believes the OP was just
inquiring in general about SMD.
but this resistence have a polarity?

Regards
 
On Wed, 3 Aug 2011 10:08:11 +0200, "Lanny" <nospam@noweb.xxx> wrote:

What kind of resistance they are, and where can buy?


Regards




As a matter of interest, why do you feel that these devices need
replacement
?

Arfa

Seems to be two camps of respondents. But the picture seems to be a
generic stock photo, so I'm in the camp that believes the OP was just
inquiring in general about SMD.

but this resistence have a polarity?
---
No.

--
JF
 
On 8/3/2011 11:39 AM, Lanny wrote:
but this resistence have a polarity?
---
No.

--
JF

They have a particular name these little resistance?

Regards


They do when I drop one and can't find it
JC
 
On Wed, 3 Aug 2011 17:39:31 +0200, "Lanny" <nospam@noweb.xxx> wrote:

but this resistence have a polarity?
---
No.

--
JF

They have a particular name these little resistance?
---
"Surface mount resistors"

--
JF
 
"John Fields" <jfields@austininstruments.com> ha scritto nel messaggio
news:167j37p05nns6jfkn7bf7lk7iln9eka2f1@4ax.com...
On Wed, 3 Aug 2011 17:39:31 +0200, "Lanny" <nospam@noweb.xxx> wrote:



but this resistence have a polarity?
---
No.

--
JF

They have a particular name these little resistance?

---
"Surface mount resistors"
still answering to that guy?
Do you realize hi's kidding everybody?
 
On 8/3/2011 3:08 AM, Lanny wrote:
but this resistence have a polarity?

Regards
No you're thinking of electrolytic resistors.
They usually have to polarity clearly marked on them.

Jeff



--
"Everything from Crackers to Coffins"
 
On Wed, 3 Aug 2011 22:20:18 +0200, "Vale" <vale@fastwebnet.it> wrote:

"John Fields" <jfields@austininstruments.com> ha scritto nel messaggio
news:167j37p05nns6jfkn7bf7lk7iln9eka2f1@4ax.com...
On Wed, 3 Aug 2011 17:39:31 +0200, "Lanny" <nospam@noweb.xxx> wrote:



but this resistence have a polarity?
---
No.

--
JF

They have a particular name these little resistance?

---
"Surface mount resistors"

still answering to that guy?
---
No, I'm just answering him, not answering to him.
---

Do you realize hi's kidding everybody?
---
Don't spoil my troll.

--
JF
 
On Wed, 03 Aug 2011 15:07:32 -0400, Archon
<Chipbee40_SpamNo@yahoo.com> wrote:

On 8/3/2011 11:39 AM, Lanny wrote:

but this resistence have a polarity?
---
No.

--
JF

They have a particular name these little resistance?

Regards


They do when I drop one and can't find it
JC

They work better at high frequencies if you install them upside down.
Less inductance.

That's the way they always land on the bench anyhow.


John
 
On Wed, 03 Aug 2011 16:46:29 -0500, Jeffrey Angus <grendelair@aim.com>
wrote:

On 8/3/2011 3:08 AM, Lanny wrote:
but this resistence have a polarity?

Regards

No you're thinking of electrolytic resistors.
They usually have to polarity clearly marked on them.

Jeff
There actually were electrolytic resistors, actually electrolytic
rheostats, but they were usually used at AC.

I once saw a big multi-megavolt Marx generator that used liquid
resistors, long clear hoses filled with water and something blue,
copper sulfate or some such. Looked cool.


John
 
On Wed, 03 Aug 2011 16:46:11 -0700, John Larkin
<jjlarkin@highNOTlandTHIStechnologyPART.com> wrote:

On Wed, 03 Aug 2011 15:07:32 -0400, Archon
Chipbee40_SpamNo@yahoo.com> wrote:

On 8/3/2011 11:39 AM, Lanny wrote:

but this resistence have a polarity?
---
No.

--
JF

They have a particular name these little resistance?

Regards


They do when I drop one and can't find it
JC


They work better at high frequencies if you install them upside down.
Less inductance.
Less inductance or higher capacitance (resistive element closer to the plane)?

That's the way they always land on the bench anyhow.
Yours hit the bench?
 

Welcome to EDABoard.com

Sponsor

Back
Top