Turntable Pre Amp

[Bill Harvey]

Hi

I need to build a pre amp to enable me to plug my Record Player Turnrtable
into the Line In of my computer in order to convert some Vinyl to MP3.

Anyone point me to a schematic?

Thanks

--
"It's best to know what your looking for before you start"

E Mail bill_harvey@t-online.de
Home Page http://bill_harvey.bei.t-online.de/home%20page.htm

 

[Lord Garth]

"Bill Harvey" <bill_harvs@hotmail.com> wrote in message
news:bpqtra$4r1$07$1@news.t-online.com...

Hi

I need to build a pre amp to enable me to plug my Record Player Turnrtable
into the Line In of my computer in order to convert some Vinyl to MP3.

Anyone point me to a schematic?

Thanks

Here you go....http://www.geocities.com/rjm003.geo/rjmaudio/pho_a6.html

 

[Larry Green]

"Bill Harvey" <bill_harvs@hotmail.com> wrote in message
news:bpqtra$4r1$07$1@news.t-online.com...

Hi

I need to build a pre amp to enable me to plug my Record Player Turnrtable
into the Line In of my computer in order to convert some Vinyl to MP3.

Anyone point me to a schematic?

Thanks

Do you have a 'tape out' on your stereo amplifier? If so do what I do when I
want to convert my vinyl to .wav, .cda or mp3 etc. This is assuming of
course that you have 'phono in' on that amp and can actually play the
records in the first place.

I have a lead that connects to the stereo amp at the 'tape out' RCA sockets
at one end and the other end is terminated in a 3.5mm stereo jack plug that
plugs into the 'line in' socket on my sound card. This works well for me
when used in conjunction with 'Wave Repair' software that allows me to
remove all the clicks, pops and scratches on the old vinyl.

Larry

 

[Baphomet]

"Bill Harvey" <bill_harvs@hotmail.com> wrote in message
news:bpqtra$4r1$07$1@news.t-online.com...

Hi

I need to build a pre amp to enable me to plug my Record Player Turnrtable
into the Line In of my computer in order to convert some Vinyl to MP3.

Anyone point me to a schematic?

Thanks

http://www.4qdtec.com/preamp.html scroll to bottom "universal preamplfier"

http://www.schematicsforfree.com/audio2/circuits/Pre-Amp_-_Zetex_Low_Noise_Audio_Input_Stage.pdf

http://circuitos.tripod.cl/schem/r74.gif

You might have to either add and or adjust the equalization to conform to
R.I.A.A. but these should give you a start.

 

[tempus fugit]

check on the binaries NG - there's a schem there posted for someone who
asked the same question


"Bill Harvey" <bill_harvs@hotmail.com> wrote in message
news:bpqtra$4r1$07$1@news.t-online.com...

Hi

I need to build a pre amp to enable me to plug my Record Player Turnrtable
into the Line In of my computer in order to convert some Vinyl to MP3.

Anyone point me to a schematic?

Thanks

--
"It's best to know what your looking for before you start"

E Mail bill_harvey@t-online.de
Home Page http://bill_harvey.bei.t-online.de/home%20page.htm