ilgrim-ED761D.15025226022010@70-3-168-216.pools.spcsdns.net...Thanks. However, they don't seem to have the manual for the FET version.Go here for the manual:
http://www.jewellinstruments.com/triplettmanuals.htm
rgds,
/tri-comp
"Pilgrim" <pilgrim@noemail.net> skrev i en meddelelse
news
Some time ago some one gave a site to download Triplett manuals. I can't
seem to find it. Can anyone help? Specifically I need a manual for a
Model 310-FET.
Thanks,
Chuck P.
ilgrim-D95950.07313501032010@70-3-168-216.pools.spcsdns.net...In article <4b8b7eb1$0$36579$edfadb0f@dtext01.news.tele.dk>,
"TRICOMP" <tricomp@writeme.com> wrote:
Go here for the manual:
http://www.jewellinstruments.com/triplettmanuals.htm
rgds,
/tri-comp
"Pilgrim" <pilgrim@noemail.net> skrev i en meddelelse
news
Some time ago some one gave a site to download Triplett manuals. I
can't
seem to find it. Can anyone help? Specifically I need a manual for
a
Model 310-FET.
Thanks,
Chuck P.
Thanks. However, they don't seem to have the manual for the FET
version.
Chuck P.
Thanks. I didn't recognize the number they had listed. Down loaded same,Hi,
It is there I just downloaded it.
--
Wayne
"Pilgrim" <pilgrim@noemail.net> wrote in message
news
In article <4b8b7eb1$0$36579$edfadb0f@dtext01.news.tele.dk>,
"TRICOMP" <tricomp@writeme.com> wrote:
Go here for the manual:
http://www.jewellinstruments.com/triplettmanuals.htm
rgds,
/tri-comp
"Pilgrim" <pilgrim@noemail.net> skrev i en meddelelse
news
Some time ago some one gave a site to download Triplett manuals. I
can't
seem to find it. Can anyone help? Specifically I need a manual for
a
Model 310-FET.
Thanks,
Chuck P.
Thanks. However, they don't seem to have the manual for the FET
version.
Chuck P.
Hi,
It is there I just downloaded it.
When your print control panel pops up there should be a scalingIn article <L8CdnZAxB8gKdhbWnZ2dnUVZ_tWdnZ2d@giganews.com>,
"Wayne" <NOwaynerrSPAM@comcast.net> wrote:
Hi,
It is there I just downloaded it.
--
Wayne
"Pilgrim" <pilgrim@noemail.net> wrote in message
news
In article <4b8b7eb1$0$36579$edfadb0f@dtext01.news.tele.dk>,
"TRICOMP" <tricomp@writeme.com> wrote:
Go here for the manual:
http://www.jewellinstruments.com/triplettmanuals.htm
rgds,
/tri-comp
"Pilgrim" <pilgrim@noemail.net> skrev i en meddelelse
news
Some time ago some one gave a site to download Triplett manuals. I
can't
seem to find it. Can anyone help? Specifically I need a manual for
a
Model 310-FET.
Thanks,
Chuck P.
Thanks. However, they don't seem to have the manual for the FET
version.
Chuck P.
Hi,
It is there I just downloaded it.
Thanks. I didn't recognize the number they had listed. Down loaded same,
but am having trouble printing it out. I am not too computer literate.
All I get printed out is the center section of each download page.
Any suggestions?
Thanks
Chuck P.
Thanks again. Seem to have got it close enough.On Mon, 01 Mar 2010 11:35:48 -0800, Pilgrim
pilgrim@noemail.net>wrote:
In article <L8CdnZAxB8gKdhbWnZ2dnUVZ_tWdnZ2d@giganews.com>,
"Wayne" <NOwaynerrSPAM@comcast.net> wrote:
Hi,
It is there I just downloaded it.
--
Wayne
"Pilgrim" <pilgrim@noemail.net> wrote in message
news
In article <4b8b7eb1$0$36579$edfadb0f@dtext01.news.tele.dk>,
"TRICOMP" <tricomp@writeme.com> wrote:
Go here for the manual:
http://www.jewellinstruments.com/triplettmanuals.htm
rgds,
/tri-comp
"Pilgrim" <pilgrim@noemail.net> skrev i en meddelelse
news
Some time ago some one gave a site to download Triplett manuals. I
can't
seem to find it. Can anyone help? Specifically I need a manual for
a
Model 310-FET.
Thanks,
Chuck P.
Thanks. However, they don't seem to have the manual for the FET
version.
Chuck P.
Hi,
It is there I just downloaded it.
Thanks. I didn't recognize the number they had listed. Down loaded same,
but am having trouble printing it out. I am not too computer literate.
All I get printed out is the center section of each download page.
Any suggestions?
Thanks
Chuck P.
When your print control panel pops up there should be a scaling
setting to "fit to printable area" and "auto rotate and center".
Should also be a preview of what will be printed.
Different print drivers may have different dialog so the wording may
not be exactly the same.