tilt switch report 4 directions

K

Keith Sloan

Guest
Anybody point me in the direction of a tilt switch that has the following

1) Way of determining direction of tilt - 4 directions.

2) Low value for tilt like only a degree or two rather than 17 degrees as is
common.

Thanks Keith
 
Analog devices has some nice accelerometers ( adxl2xxxx) that can easily be
configured for your requirement( been there done that) or you can go the
cheapy route and 'cage a ball' like he pinball machines have.
hi tech
lo tech
it's up to you
 
On Tue, 27 Apr 2004 12:00:32 +0100, the renowned "Keith Sloan"
<Keith_Sloan@uk.ibm.com> wrote:

Anybody point me in the direction of a tilt switch that has the following

1) Way of determining direction of tilt - 4 directions.

2) Low value for tilt like only a degree or two rather than 17 degrees as is
common.

Thanks Keith
Suggest you look into electrolytic sensors as well as other options
that have been suggested.

Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
 
Thanks for the info

"j.b. miller" <invalidjbmiller@cogeco.ca> wrote in message
news:nYrjc.3363$_12.1525@read1.cgocable.net...
Analog devices has some nice accelerometers ( adxl2xxxx) that can easily
be
configured for your requirement( been there done that) or you can go the
cheapy route and 'cage a ball' like he pinball machines have.
hi tech
lo tech
it's up to you
 

Welcome to EDABoard.com

Sponsor

Back
Top