Thermostat...

O

Olden

Guest
Best to ask here or ?

My gas furnace is a Holly.
It has an old mercury two wire thermostat.

I want to change the thermostat so that I can set the same two
temperature ranges, day / night, for every day.

I do not understand thermostats.

The local store does not know how to advise me.

Thermostat suggestions please and maybe a little tutorial.
 
On 16.02.21 21:55, Olden wrote:
Best to ask here or ?

My gas furnace is a Holly.
It has an old mercury two wire thermostat.

I want to change the thermostat so that I can set the same two
temperature ranges, day / night, for every day.

I do not understand thermostats.

The local store does not know how to advise me.

Thermostat suggestions please and maybe a little tutorial.
Click to expand...
It would be nice to know the open voltage and the switch current when
closed.
Around 24 volts any ordinary programmable thermostat unit might do.
 
On 2/16/2021 2:55 PM, Olden wrote:
Best to ask here or ?

My gas furnace is a Holly.
It has an old mercury two wire thermostat.

I want to change the thermostat so that I can set the same two
temperature ranges, day / night, for every day.

I do not understand thermostats.

The local store does not know how to advise me.

Thermostat suggestions please and maybe a little tutorial.
Click to expand...
The easy way is to have two thermostat and a switch. Have one adjusted
for day and the other for night and

day/night switch to go between them. It gets more complicated if you
have an air conditioner to deal with.


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
 
In <602c5820$0$27446$e4fe514c@textnews.kpn.nl> Sjouke Burry <burrynulnulfour@ppllaanneett.nnll> writes:

On 16.02.21 21:55, Olden wrote:
Best to ask here or ?

My gas furnace is a Holly.
It has an old mercury two wire thermostat.

I want to change the thermostat so that I can set the same two
temperature ranges, day / night, for every day.

I do not understand thermostats.

The local store does not know how to advise me.
Click to expand...

There are (or at least were...) plenty of thermostats
with multiple settings that followed the time of
day and used a battery to operate the clock, hence
could be hooked up to a basic two-wire control system
and not worry about wiring for power.

--
_____________________________________________________
Knowledge may be power, but communications is the key
dannyb@panix.com
[to foil spammers, my address has been double rot-13 encoded]
 
Hello, Olden!

On Tue, 16 Feb 2021 12:55:07 -0800
Olden <Olden@Olden.com> wrote:

Best to ask here or ?

My gas furnace is a Holly.
It has an old mercury two wire thermostat.

I want to change the thermostat so that I can set the same two
temperature ranges, day / night, for every day.
Click to expand...

Just an idea: you can use two thermostats and mechanical 24 hour timer to switch them. Something like that: https://www.theben.de/en/syn-161-d-1610011 Timers can be different, with different outputs (output relay type/voltage/current, etc), this is just an example. If you do not need precision time keeping on power loss, it\'s preferable to use a timer without battery (no potential battery leaking out). I do not know your schematics and may be any safety limits, so it\'s just an idea.


------
With Best Regards,
Evgeniy
 
I need to buy on-line.
Any model numbers ?
What terminology do I look for ?

Please help.


danny burstein wrote:
In <602c5820$0$27446$e4fe514c@textnews.kpn.nl> Sjouke Burry <burrynulnulfour@ppllaanneett.nnll> writes:

On 16.02.21 21:55, Olden wrote:
Best to ask here or ?

My gas furnace is a Holly.
It has an old mercury two wire thermostat.

I want to change the thermostat so that I can set the same two
temperature ranges, day / night, for every day.

I do not understand thermostats.

The local store does not know how to advise me.

There are (or at least were...) plenty of thermostats
with multiple settings that followed the time of
day and used a battery to operate the clock, hence
could be hooked up to a basic two-wire control system
and not worry about wiring for power.
Click to expand...
 
On Thursday, February 18, 2021 at 4:19:01 PM UTC-8, Olden wrote:
I need to buy on-line.
Any model numbers ?
What terminology do I look for ?
Click to expand...

Almost any \'smart\' thermostat can do a daily fallback, but this
does mean it\'s a display-and-buttons-and-clock elaborate item.
Honeywell is a big manufacturer, their web site should give you
some ideas
<https://honeywellstore.com/store/products/wi-fi-7-day-programmable-thermostat-honeywell-rth6580wf.htm>

Look at a few, and maybe check out the manuals online.
 
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Olden wrote:
Best to ask here or ?

My gas furnace is a Holly.
It has an old mercury two wire thermostat.

I want to change the thermostat so that I can set the same two
temperature ranges, day / night, for every day.

I do not understand thermostats.

The local store does not know how to advise me.

Thermostat suggestions please and maybe a little tutorial.
Click to expand...

The major thing you need to know is the control voltage - that SHOULD be
stamped / molded into your existing thermostat. After that, it\'s a
quick wire-for-wire swap -- check the existing, it\'s probably labeled as
\"W\" / \"R\" (for \"White\" and \"Red\" wire, respectively). Connect those
wires coming out of the wall to the same terminals of the new thermostat
(ignore Y/B/etc, as those connections are for cooling / multi-stage
heat / etc.).

Then program the thing for whatever temperatures you want.

-----BEGIN PGP SIGNATURE-----
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=P/e0
-----END PGP SIGNATURE-----

--
|_|O|_| Github: https://github.com/dpurgert
|_|_|O| PGP: DDAB 23FB 19FA 7D85 1CC1 E067 6D65 70E5 4CE7 2860
|O|O|O| Former PGP: 05CA 9A50 3F2E 1335 4DC5 4AEE 8E11 DDF3 1279 A281
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top