The Australian Broadband Survey for 2011

D

Don McKenzie

Guest
The Australian Broadband Survey for 2011 was conducted over a four week period — from 1 January 2011 to 1 February 2011,
during which the survey was successfully completed and verified a total of 23,513 times.

As this was an open survey, we have been extremely rigourous about maintaining data integrity. Therefore we have only
considered submissions that had been validated, and have also carefully identified and eliminated instances of ballot
stuffing.

When you read the results, it's important to keep in mind who was surveyed. These results largely represent the views of
informed opinion leaders, and informed consumers. We have not attempted to normalise the results to represent the
broader marketplace, as we believe the information to be more valuable with this bias intact.

The group surveyed are more likely to be advising friends, family and co-workers on technology decisions. Service
providers should pay close attention to this demographic, as their influence wields significant impact.

Full Story:
http://whirlpool.net.au/survey/2010/

Cheers Don...

Ref: http://dontronics-shop.blogspot.com/2011/04/australian-broadband-survey-for-2011.html

=======================


--
Don McKenzie

Dontronics Blog: http://www.GodzillaSeaMonkey.com
Dontronics Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
Web Camera Page: http://www.dontronics.com/webcam
No More Damn Spam: http://www.dontronics.com/spam

These products will reduce in price by 5% every month:
http://www.dontronics-shop.com/minus-5-every-month.html
http://www.dontronics-shop.com/ics.html

Bare Proto PCB for PIC or AVR projects?
"I'd buy that for a Dollar!".
 
On Wed, 20 Apr 2011 15:26:56 +1000, Don McKenzie wrote:

The Australian Broadband Survey for 2011 was conducted over a four week period ĄX from 1 January 2011 to 1 February 2011,
during which the survey was successfully completed and verified a total of 23,513 times.

As this was an open survey, we have been extremely rigourous about maintaining data integrity. Therefore we have only
considered submissions that had been validated, and have also carefully identified and eliminated instances of ballot
stuffing.

When you read the results, it's important to keep in mind who was surveyed. These results largely represent the views of
informed opinion leaders, and informed consumers. We have not attempted to normalise the results to represent the
broader marketplace, as we believe the information to be more valuable with this bias intact.

The group surveyed are more likely to be advising friends, family and co-workers on technology decisions. Service
providers should pay close attention to this demographic, as their influence wields significant impact.

Full Story:
http://whirlpool.net.au/survey/2010/

Cheers Don...

Ref: http://dontronics-shop.blogspot.com/2011/04/australian-broadband-survey-for-2011.html

=======================
Click to expand...
Don, it states it is 2011, but the web address saids 2010
 
On 20-Apr-11 5:51 PM, SolomonW wrote:

Don, it states it is 2011, but the web address saids 2010
Click to expand...
It's the correct survey as it was put up on WP's Industry News web page
just a few days ago.

I took part in the survey when it was put up on WP recently, so I think
that obvious thing is that somebody at WP has created a link for the
2011 survey and stuffed up the year.

I put a note on the WP comment section to tell them about it.


--

Sandgroper
--------------------------------------------
Save planet Earth !
It's the only place that has Pizza and Beer
 
On 21-Apr-11 2:19 AM, Sandgroper wrote:
On 20-Apr-11 5:51 PM, SolomonW wrote:


Don, it states it is 2011, but the web address saids 2010

It's the correct survey as it was put up on WP's Industry News web page
just a few days ago.

I took part in the survey when it was put up on WP recently, so I think
that obvious thing is that somebody at WP has created a link for the
2011 survey and stuffed up the year.

I put a note on the WP comment section to tell them about it.
Click to expand...
yes thanks is correct, and very informative.
Must have taken some time to fill out the questionnaire.

Here is one that reads correctly, but if they change it, this will be broken also.
http://x2t.com/whirlpool-net-au-survey-2011

Sometimes it pays to bite your lip and wear it, as I'm sure thousands will now have the link as written.

Cheers Don...

================


--
Don McKenzie

Dontronics Blog: http://www.GodzillaSeaMonkey.com
Dontronics Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
Web Camera Page: http://www.dontronics.com/webcam
No More Damn Spam: http://www.dontronics.com/spam

These products will reduce in price by 5% every month:
http://www.dontronics-shop.com/minus-5-every-month.html
http://www.dontronics-shop.com/ics.html

Bare Proto PCB for PIC or AVR projects?
"I'd buy that for a Dollar!".
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top