Test Jigs available-Sharp and Hitachi

B

Barry & Nikki

Guest
I have the following items. Please bare with me being I have found very
limited info. on these. I am assuming that if you are looking at this post
then you are familiar with test jigs. Anyhow I have the following:

Sharp Jig- QPWBF2382TAZZ w/ QPWBN2381TAZZ attached to it. I could not
find anything out about this item. It has 8 slide switches and one push
button switch. From Left--Right Top--bottom they are labeled as follows:
Sensor, Error Display, Manual SW-P Adj, (push button) Auto SW-P Adj.,
(bottom) VCR Adj, Low Bat, A-Track, Adj Mode, RE Test. There are also
various test pin clips on the right hand side which are labeled: H-Amp-SW,
H-SW-P, 16.5V, EE Lev, W/D, PB FM

Sharp Jig- QPWBF2450TAZZ including QCNW-1275TAZZ (VTR Adj. Jig cable)
The first one mentioned has 8 switches and one push button (stop Adj.)
labeled as follows: 1.) CAM/VTR Power switch 2.)Sensar Adj. 3.)Mechanism
Adj. 4.)Battery Adj. 5.)Error Indication 6.)Pass Mode 7.) CAH Adj. 8.)VTR
Adj. Then there are 14 test pins labeled TP1-14

Hitachi DSP R Interface Board Jig MCM part #7099448 w/ DSP AV output
adapter MCM part #7099456. This jig also has three spring clip test probes
(black, yellow, white). Has a 9-pin female serial type connector as well as
a 25-pin connector.

Sharp "Fixture" jig: w/ extension cable. RUNTK0309TAZZ . Not much to
explain other than a bunch of surface mount electronics including a remote
control sensor diode and three female RCA Plugs labeled: Video Out, Monitor
Out, & Video In.

OK now that that is over with and if you are still baring with me; if
you need pics. I can email them to you so that you can see exactly what I am
describing. Just inquire about a specific item and I will get to it ASAP. As
for what I am expecting; I know these are very pricey yet I am not expecting
anything near what they are "worth". You let me know what they are worth to
you and we can go from there. I am also more than willing to trade; I am
always searching for most any car audio related parts and accessories. So
feel free to email me (must remove appropriate items from address to send)
if any or all of these items interest you. Thanks and take care.
 

Welcome to EDABoard.com

Sponsor

Back
Top