Tektronix 2236 tube

[grant]

Hi all, I am looking for a replacement tube for my out of focus 2236.
Anybody have one?

Thanks, Grant

 

[Sam Goldwasser]

glee@soundtrek.net (grant) writes:

Hi all, I am looking for a replacement tube for my out of focus 2236.
Anybody have one?

Are you sure the problem is the CRT and not the focus HV supply?

--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: The email address in this message header may no longer work. To
contact me, please use the Feedback Form at repairfaq.org. Thanks.

 

[Jim Yanik]

glee@soundtrek.net (grant) wrote in
news:c4805da7.0311181529.77585cb2@posting.google.com:

Hi all, I am looking for a replacement tube for my out of focus 2236.
Anybody have one?

Thanks, Grant

First check the 1/2W carbon film resistors located around the focus pot on
the main PCB,IIRC,they are either 1MegR or 510K(focus divider string).
They have a habit of increasing in value and finally opening.
Replace with 1/2W carbon COMPOSITION resistors of the same marked value.
This is a very common failure in the 2200 series.

--
Jim Yanik,NRA member
jyanik-at-kua.net

 

[grant]

Jim Yanik <jyanik@abuse.gov> wrote in message news:<Xns9437C8E9FC7F1jyanikkuanet@204.117.192.21>...

glee@soundtrek.net (grant) wrote in
news:c4805da7.0311181529.77585cb2@posting.google.com:

Hi all, I am looking for a replacement tube for my out of focus 2236.
Anybody have one?

Thanks, Grant

First check the 1/2W carbon film resistors located around the focus pot on
the main PCB,IIRC,they are either 1MegR or 510K(focus divider string).
They have a habit of increasing in value and finally opening.
Replace with 1/2W carbon COMPOSITION resistors of the same marked value.
This is a very common failure in the 2200 series.

You were on target Jim, one of the 510k resistors was out. The
local calibration people here in Kansas city said it was un-
repariable because the tube was not available. Boy were they wrong.
Thanks again, it's good to have the old scope back again.

Grant