Tek 7603/7D20 Manuals?? anyone?? anyone??

[DJ Bartlett]

Dear NewsGroup,

I recently purchased a Tektronix 7603 Oscilloscope with a 7D20 Programmable
Digitizer plug-in from the local electronic dismantlers, and I haven't been
having much luck in obtaining the manuals for it.

The majority of calibration and setting behavior is understandable to me
after fiddling with it for a couple of months, but there are a couple of
items that are, to me, a little counterintuitive, or not very useful, or
possibly malfunctioning in some minor way, and there is definitely some need
for calibration beyond what is available on the front panel.

I would far rather find a maintenance/calibration/user's guide than try to
figure it out entirely through trial and error.

Anybody happen to have such manuals lying about, collecting dust, or (better
yet) in digital form? Barring that, any specific suggestions about locating
them, would be appreciated.

Thanks in advance,
DJ
Please respond to djb.spam@.spameGeniusLabs.com (remove all instances of
..spam before replying)

 

[Walter Harley]

"DJ Bartlett" <djb-spam@eGeniusLabs.com> wrote in message
news:QyzSb.7949$KU6.4417@newssvr29.news.prodigy.com...

Dear NewsGroup,

I recently purchased a Tektronix 7603 Oscilloscope with a 7D20
Programmable
Digitizer plug-in from the local electronic dismantlers, and I haven't
been
having much luck in obtaining the manuals for it.

Tried http://www.manualsplus.com?

 

[Jim Yanik]

ISTR that relays were a big problem in those 7D20 units.

--
Jim Yanik
jyanik-at-kua.net

 

[Steve J. Noll]

On Fri, 30 Jan 2004 20:57:20 GMT, "DJ Bartlett"
<djb-spam@eGeniusLabs.com> wrote:

Dear NewsGroup,

I recently purchased a Tektronix 7603 Oscilloscope with a 7D20 Programmable
Digitizer plug-in from the local electronic dismantlers, and I haven't been
having much luck in obtaining the manuals for it.

The majority of calibration and setting behavior is understandable to me
after fiddling with it for a couple of months, but there are a couple of
items that are, to me, a little counterintuitive, or not very useful, or
possibly malfunctioning in some minor way, and there is definitely some need
for calibration beyond what is available on the front panel.

I would far rather find a maintenance/calibration/user's guide than try to
figure it out entirely through trial and error.

Anybody happen to have such manuals lying about, collecting dust, or (better
yet) in digital form? Barring that, any specific suggestions about locating
them, would be appreciated.

Thanks in advance,
DJ
Please respond to djb.spam@.spameGeniusLabs.com (remove all instances of
.spam before replying)

There is a directory of test equipment manual dealers at:
http://www.big-list.com