Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hello,
I would like to get information/data sheets on the Tek 465 scope. Is there
a .pdf file I can download?
Thank you.
Pete
Hello,
I would like to get information/data sheets on the Tek 465 scope. Is there
a .pdf file I can download?
Thank you.
Pete
*shrug*its an 100 Mhz dual trace.
uses older phos memory screen (not very usefull if you ask me)
The 465 was NOT a storage scope, although there were versions, 464 &its an 100 Mhz dual trace.
uses older phos memory screen (not very usefull if you ask me)
On Wed, 07 Apr 2004 03:37:29 -0700 Jamie
jamie_5_not_valid_after_5_Please@charter.net> wrote in Message id:
1077art8579tede@corp.supernews.com>:
its an 100 Mhz dual trace.
uses older phos memory screen (not very usefull if you ask me)
*shrug*
A tool is only as good as it's user makes it. I've been using mine for
close to twenty years, troubleshooting everything from monitors, power
supplies and floppy drives and from to Multibus boards to Pentium-class
microprocessor based embedded systems. I've only recently upgraded to a
2445B when the traces in the 465 developed 60Hz noise - and yes I know
it's probably the power supply caps, but I can't be bothered to repair
it.
On Wed, 07 Apr 2004 03:37:29 -0700 Jamie
jamie_5_not_valid_after_5_Please@charter.net> wrote:
its an 100 Mhz dual trace.
uses older phos memory screen (not very usefull if you ask me)
The 465 was NOT a storage scope, although there were versions, 464 &
466, which were.
Of course any CRT has some phosphor persistence, but this is generally
not confused with memory. Tek made a number of CRT storage scopes
which used "screen storage" which used a special CRT which would keep
the phosphor refreshed and hold an image on the screen. The 465 was
not one of them.
Digital storage is different from both of these.
The 465 and 465B were probably 2 of Teks most popular scopes. Both are
excellent.
-
-----------------------------------------------
Jim Adney jadney@vwtype3.org
Madison, WI 53711 USA
-----------------------------------------------
465 is a NON-storage scope,the 464 and 466 were storage scopes.my 465 does have a Phosphor Memory CRT.
it just that they get a little sucky afrer a while
they don't show a nice even image after a while.
and it does hold it the image for quite some time.
Jim Adney wrote:
On Wed, 07 Apr 2004 03:37:29 -0700 Jamie
jamie_5_not_valid_after_5_Please@charter.net> wrote:
its an 100 Mhz dual trace.
uses older phos memory screen (not very usefull if you ask me)
The 465 was NOT a storage scope, although there were versions, 464 &
466, which were.
Of course any CRT has some phosphor persistence, but this is generally
not confused with memory. Tek made a number of CRT storage scopes
which used "screen storage" which used a special CRT which would keep
the phosphor refreshed and hold an image on the screen. The 465 was
not one of them.
Digital storage is different from both of these.
The 465 and 465B were probably 2 of Teks most popular scopes. Both are
excellent.
-
-----------------------------------------------
Jim Adney jadney@vwtype3.org
Madison, WI 53711 USA
-----------------------------------------------
scope approx to uV in 10V.Jim Adney <jadney@vwtype3.org> wrote in
news:1eim70df11jkha6eua73inlb1ooruthk3n@4ax.com:
On Mon, 12 Apr 2004 15:12:33 +0000 (UTC) Jim Yanik <jyanik@abuse.gov
wrote:
Both 464 and 466 are 'screen storage',the 468 was the digital storage
scope.
Okay, but what's the difference between the 464 and the 466?
466 has reduced scan,giving a higher storage writing rate.
465 etc have much greater dynamic on screen range than any? digital