Teflon tubing

[Franc Zabkar]

I'm looking for a supplier of teflon tubing in Australia. In
particular I'm after a small quantity of 1/4" OD, 3/16" ID tubing.
I'll be cutting it to length to make bushes for the locating dowels
for the basket in a breadmaker.


- Franc Zabkar
--
Please remove one 's' from my address when replying by email.

 

[Stephen Robinson]

Franc Zabkar wrote:

I'm looking for a supplier of teflon tubing in Australia. In
particular I'm after a small quantity of 1/4" OD, 3/16" ID tubing.
I'll be cutting it to length to make bushes for the locating dowels
for the basket in a breadmaker.


- Franc Zabkar

Not sure if you have access to a lathe, but RS sell teflon rod. You
might have to buy a metre of it, so could be expensive.

Stephen

 

[Mark Harriss]

Stephen Robinson wrote:

Franc Zabkar wrote:

I'm looking for a supplier of teflon tubing in Australia. In
particular I'm after a small quantity of 1/4" OD, 3/16" ID tubing.
I'll be cutting it to length to make bushes for the locating dowels
for the basket in a breadmaker.


- Franc Zabkar


Not sure if you have access to a lathe, but RS sell teflon rod. You
might have to buy a metre of it, so could be expensive.

Stephen

Hydraulic companies may be a source to try, I use to have some
with a stainless braid on the outside for high pressures.

 

[Phil Allison]

"Franc Zabkar"

I'm looking for a supplier of teflon tubing in Australia. In
particular I'm after a small quantity of 1/4" OD, 3/16" ID tubing.
I'll be cutting it to length to make bushes for the locating dowels
for the basket in a breadmaker.

** Maybe you can use brass tubing ?

Hobby shops all sell it in imperial sizes, in 1/32 inch steps.

Some hobby shops may sell Teflon tubing - model boat builders s use it to
run flexible prop drives in.




.......... Phil

 

[Geoff C]

Stephen Robinson <sterob@westnet.com.au> wrote in news:42f74c28$1
@quokka.wn.com.au:

Franc Zabkar wrote:
I'm looking for a supplier of teflon tubing in Australia. In
particular I'm after a small quantity of 1/4" OD, 3/16" ID tubing.
I'll be cutting it to length to make bushes for the locating dowels
for the basket in a breadmaker.


- Franc Zabkar

Not sure if you have access to a lathe, but RS sell teflon rod. You
might have to buy a metre of it, so could be expensive.

Stephen

WARNING!. Unless you know what you are doing, it is hazardous to machine
teflon, flourine gas may be liberated if the temperature of the teflon near
the tool reaches a high enough temperature.

 

[Geoff C]

Franc Zabkar <fzabkar@optussnet.com.au> wrote in
news:1u2ef1pf95u7lm5jfq535mc5mcibqdmk4q@4ax.com:

I'm looking for a supplier of teflon tubing in Australia. In
particular I'm after a small quantity of 1/4" OD, 3/16" ID tubing.
I'll be cutting it to length to make bushes for the locating dowels
for the basket in a breadmaker.


- Franc Zabkar

Aus Plastics (australia) PTY LTD in Springvale, Melbourne are a small
operation which sell PTFE spaghetti tubing. Also EXTECH, a catalog sales
company for lab equipment. DOTMAR for large stock sizes and billets.