Technics SL-B100 Turntable Grounding Wire

[Rob Willison]

Hi,

I just recently had a Technics SL-B100 turntable refurbished with a
new cartridge and needle. I don't have a receiver yet, but I was
speaking over the phone to someone who might sell me one, and he asked
if the piece has a grounding wire. I looked in the back and I see a
small hole next to the red and white wires that plug into a receiver,
but no wire.

Do I need a grounding wire for this unit, or not? Any help would be
greatly, greatly appreciated. I've had a very hard time setting this
all up, and I'm a first timer.

Best,

Rob

 

[Franc Zabkar]

On Sun, 8 Aug 2010 21:11:31 -0700 (PDT), Rob Willison
<willison@gmail.com> put finger to keyboard and composed:

Do I need a grounding wire for this unit, or not?

Here is a library of turntable manuals:
http://www.vinylengine.com/library/technics.shtml

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

 

[Mark Zacharias]

"Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message
news:m5iv56db07d007ckcj4so7m27plq2bb7hu@4ax.com...

On Sun, 8 Aug 2010 21:11:31 -0700 (PDT), Rob Willison
willison@gmail.com> put finger to keyboard and composed:

Do I need a grounding wire for this unit, or not?

Here is a library of turntable manuals:
http://www.vinylengine.com/library/technics.shtml

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

If it has a metal tonearm, yes.

Many Technics models of this time had a detachable ground wire, which
frequently got pulled out and lost. I have been able to rig replacements.

Mark Z.

 

[David Nebenzahl]

On 8/9/2010 4:42 AM Mark Zacharias spake thus:

"Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message
news:m5iv56db07d007ckcj4so7m27plq2bb7hu@4ax.com...

On Sun, 8 Aug 2010 21:11:31 -0700 (PDT), Rob Willison
willison@gmail.com> put finger to keyboard and composed:

Do I need a grounding wire for this unit, or not?

Here is a library of turntable manuals:
http://www.vinylengine.com/library/technics.shtml

If it has a metal tonearm, yes.

Many Technics models of this time had a detachable ground wire, which
frequently got pulled out and lost. I have been able to rig replacements.

Should be super-simple; aren't they just screwed to the metal deck on
the bottom (assuming there is one)? If not, then probably to the bottom
of the tonearm mount.


--
The fashion in killing has an insouciant, flirty style this spring,
with the flaunting of well-defined muscle, wrapped in flags.

- Comment from an article on Antiwar.com (http://antiwar.com)