TEAC GF-350 turntable

[jimd]

The turntable on my TEAC GF-350 is turning too fast. (I've replaced the
belt, so that's not the problem.)
Does anyone have a schematic of the motor and control? The speed selector
switch works; speed increases
as the switch is moved from 33 to 45 to 78, but all are too fast...


-------------------------------------
jad



##-----------------------------------------------#
Delivered via http://www.electrondepot.com
Electronics Enthusiasts' Community of the Ne
Web and RSS access to your favorite newsgroup -
aus.electronics - 38745 messages and counting
##-----------------------------------------------##

 

[Chris]

On Feb 11, 12:41 am, jbdurham_at_yahoo_dot_...@foo.com (jimd) wrote:

The turntable on my TEAC GF-350 is turning too fast.  (I've replaced the
belt, so that's not the problem.)
Does anyone have a schematic of the motor and control?  The speed selector
switch works; speed increases
as the switch is moved from 33 to 45 to 78, but all are too fast...

-------------------------------------
jad

##-----------------------------------------------##
Delivered via  http://www.electrondepot.com/
Electronics Enthusiasts' Community of the Net
Web and RSS access to your favorite newsgroup -
aus.electronics - 38745 messages and counting!
##-----------------------------------------------##

It's available at http://elektrotanya.com/teac_gf-350_sm.pdf/download.html
but the means of controlling the speed is almost certainly built into
the motor housing and the internal circuitry isn't shown - the
schematic just shows external resistors for setting the speed. There
appears to be a body of comments on the web suggesting the belt
tension affects the speed, but that could be nonsense.

Chris