TDS 2002 psu noise

Guest
Hi all,

I have a Tektronix TDS 2002, and it has a great issue: it is noisy.

Its psu (switched-mode PSU) is very noisy, and radiates a 44 kHz signal
that contaminates DUT (dispositive under test).

I hope that Tektronix fixes this nasty problem.

regards,

luis.
 
luismc60@gmail.com wrote in
news:1133389726.415399.197910@g47g2000cwa.googlegroups.com:

Hi all,

I have a Tektronix TDS 2002, and it has a great issue: it is noisy.

Its psu (switched-mode PSU) is very noisy, and radiates a 44 kHz signal
that contaminates DUT (dispositive under test).

I hope that Tektronix fixes this nasty problem.

regards,

luis.
Did you send them a letter or email? Or have it checked at a TEK service
center?
www.tek.com

--
Jim Yanik
jyanik
at
kua.net
 
Jim,


Yes, i do.

I went to Livingstone technical service, and they told me that is an
issue that ALL TDA2002 suffer, and they don't fixes that. My scope is
under warranty and Livingstone don't repair it.

Livingstone technical service was capable of found the same failure I
saw, follwing my instructions on how to measure and seeing it, but they
don't repair it because the same failure was saw in all scopes TDS2000
series they measured in their workshop.

amazing.

luis.


Jim Yanik ha escrito:

luismc60@gmail.com wrote in
news:1133389726.415399.197910@g47g2000cwa.googlegroups.com:

Hi all,

I have a Tektronix TDS 2002, and it has a great issue: it is noisy.

Its psu (switched-mode PSU) is very noisy, and radiates a 44 kHz signal
that contaminates DUT (dispositive under test).

I hope that Tektronix fixes this nasty problem.

regards,

luis.



Did you send them a letter or email? Or have it checked at a TEK service
center?
www.tek.com

--
Jim Yanik
jyanik
at
kua.net
 
luismc60@gmail.com wrote in
news:1133418230.073816.109530@f14g2000cwb.googlegroups.com:

Jim,


Yes, i do.

I went to Livingstone technical service, and they told me that is an
issue that ALL TDA2002 suffer, and they don't fixes that. My scope is
under warranty and Livingstone don't repair it.

Livingstone technical service was capable of found the same failure I
saw, follwing my instructions on how to measure and seeing it, but
they don't repair it because the same failure was saw in all scopes
TDS2000 series they measured in their workshop.

amazing.

luis.


Jim Yanik ha escrito:

luismc60@gmail.com wrote in
news:1133389726.415399.197910@g47g2000cwa.googlegroups.com:

Hi all,

I have a Tektronix TDS 2002, and it has a great issue: it is noisy.

Its psu (switched-mode PSU) is very noisy, and radiates a 44 kHz
signal that contaminates DUT (dispositive under test).

I hope that Tektronix fixes this nasty problem.

regards,

luis.



Did you send them a letter or email? Or have it checked at a TEK
service center?
www.tek.com

--
Jim Yanik
jyanik
at
kua.net
Then you need to contact TEKTRONIX directly.
Not a subsidiary,but the US factory.

--
Jim Yanik
jyanik
at
kua.net
 

Welcome to EDABoard.com

Sponsor

Back
Top