TAA611B info needed

N

Nocturnal1

Guest
Hi,
Does anyone have a link to info on the low power amplifier chip TAA611B ?

I specifically need to know the supply voltage range, but would like all
other info available. I scoured the net for the datasheet to no avail.

Thank you,
Tom in Mn
nocone *at* uslink -dot- com
 
"Nocturnal1" <file13@nojunkmail.com> wrote in
news:3fb12387_3@newspeer2.tds.net:

Hi,
Does anyone have a link to info on the low power amplifier chip TAA611B ?

I specifically need to know the supply voltage range, but would like all
other info available. I scoured the net for the datasheet to no avail.

Thank you,
Tom in Mn
nocone *at* uslink -dot- com
Click to expand...
Hi,

The only thing I could find is a schematic where it is used:
http://www.qrz.ru/reference/micro2/pic/2.shtml.

Unfortunately no supply voltages here.


HTH,

--
Gert van den Heuvel
webmaster www.HobbyElectronics.info
 
Thank you for your efforts - any little bit of information like that is
useful and I appreciate the time you took to help me search.
I know I 9VDC will work fine, but don't want to blow the chips with 12V if I
tried it.
~Tom


"Gert van den Heuvel" <newsRemovethiS@hobbyelectronics.info> wrote in
message news:Xns94326F1395070newshobbyelectronics@195.121.6.84...
"Nocturnal1" <file13@nojunkmail.com> wrote in
news:3fb12387_3@newspeer2.tds.net:

Hi,
Does anyone have a link to info on the low power amplifier chip TAA611B
?

I specifically need to know the supply voltage range, but would like all
other info available. I scoured the net for the datasheet to no avail.

Thank you,
Tom in Mn
nocone *at* uslink -dot- com




Hi,

The only thing I could find is a schematic where it is used:
http://www.qrz.ru/reference/micro2/pic/2.shtml.

Unfortunately no supply voltages here.


HTH,

--
Gert van den Heuvel
webmaster www.HobbyElectronics.info
Click to expand...
 
"Nocturnal1" <file13@nojunkmail.com> kirjoitti
viestissä:3fb12387_3@newspeer2.tds.net...
Hi,
Does anyone have a link to info on the low power amplifier chip TAA611B ?

I specifically need to know the supply voltage range, but would like all
other info available. I scoured the net for the datasheet to no avail.

Thank you,
Tom in Mn
nocone *at* uslink -dot- com


My 1980 SGS-Ates databook says that the abs max supply voltage is 15V.
Click to expand...
Most of the parameters are specd at 6V and 12V.
juhani
 
THANK YOU!!!
I appreciate the time you took to research this.
~Tom

"Juhani" <juhani32@yahoo.co.uk> wrote in message
news:bp8ll3$ki5$1@phys-news1.kolumbus.fi...
"Nocturnal1" <file13@nojunkmail.com> kirjoitti
viestissä:3fb12387_3@newspeer2.tds.net...
Hi,
Does anyone have a link to info on the low power amplifier chip TAA611B
?

I specifically need to know the supply voltage range, but would like all
other info available. I scoured the net for the datasheet to no avail.

Thank you,
Tom in Mn
nocone *at* uslink -dot- com


My 1980 SGS-Ates databook says that the abs max supply voltage is 15V.
Most of the parameters are specd at 6V and 12V.
juhani
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top