sylvania dual vcr/dvd combo

[buddy]

I need to change the drive belt on the vcr it looks like I would have to
pull the whole board out to get underneath the transport ,does this sound
right or is there a better why of doing it,older vcr's you could take the
transport out model number is Sylvania dvc-845 E any help?
thanks

 

[b]

On Jan 2, 11:35 pm, "buddy" <buddy...@hotmail.com> wrote:

I need to change the drive belt on the vcr  it looks like I would have to
pull the whole board out to get underneath the transport ,does this sound
right or is there a better why of doing it,older vcr's you could take the
transport out      model number is   Sylvania dvc-845 E     any help?
thanks

In most the later centre-transport vcrs, you first have to remove the
connectors to the heads then unscrew and remove the deck , then unclip
and remove the pcb. It's not as bad as it sounds, tends to take under
10 mins.
-B

 

[buddy]

"b" <reverend_rogers@yahoo.com> wrote in message
news:51736d5e-ebaa-44fb-ba72-46f2b40bc457@a40g2000vbu.googlegroups.com...
On Jan 2, 11:35 pm, "buddy" <buddy...@hotmail.com> wrote:

I need to change the drive belt on the vcr it looks like I would have to
pull the whole board out to get underneath the transport ,does this sound
right or is there a better why of doing it,older vcr's you could take the
transport out model number is Sylvania dvc-845 E any help?
thanks

In most the later centre-transport vcrs, you first have to remove the
connectors to the heads then unscrew and remove the deck , then unclip
and remove the pcb. It's not as bad as it sounds, tends to take under
10 mins.
-B

Ok thank you finished it up today I had to take dvd rom out pull the one
piece main board then 2 screws holding the transport to the board just to
get to the belt ..older ones were easier lol I can't wait for spring
fishing thanks again