Surface lights failed on GE Microwave oven JVM 1339BW02

A

Al Thumbs

Guest
I have had this oven for 15 years, and it is working well. Recently,
the stovetop lights at the bottom of this built-in unit quit working.
I replaced both bulbs but that didn't do it.

I found a post online about a similar problem that said there is a
foil trace on the circuit board that might be cracked, and that
repairing it may fix my problem. But I have no idea how to get to the
board, which is behind the keypad. I don't even know how to get it off
the wall.

Grateful for all help!

Al Thumbs
 
On Mar 10, 1:39 pm, Al Thumbs <bcdr...@comcast.net> wrote:
I have had this oven for 15 years, and it is working well. Recently,
the stovetop lights at the bottom of this built-in unit quit working.
I replaced both bulbs but that didn't do it.

I found a post online about a similar problem that said there is a
foil trace on the circuit board that might be cracked, and that
repairing it may fix my problem. But I have no idea how to get to the
board, which is behind the keypad. I don't even know how to get it off
the wall.

Grateful for all help!

Al Thumbs
Click to expand...
Well, maybe I DO know how to get it off the wall, found some
instructions that indicate it slides out from a hanger. But how to fix
those lights?

AT
 
On Thu, 10 Mar 2011 11:05:18 -0800 (PST), Al Thumbs
<bcdrums@comcast.net> put finger to keyboard and composed:

Well, maybe I DO know how to get it off the wall, found some
instructions that indicate it slides out from a hanger. But how to fix
those lights?
Click to expand...
Do these exploded views help you at all?
http://www.searspartsdirect.com/partsdirect/part-model/GE-Parts/Microwave-Parts/Model-JVM1339BW02/0432/0123370?pathTaken=&prst=0&shdMod=JVM1339BW02

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 
On Mar 11, 12:08 am, Franc Zabkar <fzab...@iinternode.on.net> wrote:
On Thu, 10 Mar 2011 11:05:18 -0800 (PST), Al Thumbs
bcdr...@comcast.net> put finger to keyboard and composed:

Well, maybe I DO know how to get it off the wall, found some
instructions that indicate it slides out from a hanger. But how to fix
those lights?

Do these exploded views help you at all?http://www.searspartsdirect.com/partsdirect/part-model/GE-Parts/Micro...

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
Click to expand...
Yes, thanks.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top