SuperSpice: how to add a curve into the graph ?

[Franck]

Hi,

I have downloaded SuperSpice and I don't anderstand how it's works.

1) In the example called "impedance.sss" there is 2 curves in the graph,
where are define theses curves ?
How to remove one curve ?

2) To begin, I would like to plot the curve of the load of a capacitor
through a resistor in function of time.
see my file here: http://franckcl.free.fr/sspice.sss

How to do this ?

Thank you
Franck

 

[Damir]

On Sat, 22 Jan 2005 11:59:30 +0100, "Franck" <nospam@free.fr> wrote:

Hi,

I have downloaded SuperSpice and I don't anderstand how it's works.

1) In the example called "impedance.sss" there is 2 curves in the graph,
where are define theses curves ?
How to remove one curve ?

2) To begin, I would like to plot the curve of the load of a capacitor
through a resistor in function of time.
see my file here: http://franckcl.free.fr/sspice.sss

How to do this ?

Thank you
Franck

Go to sci.electronics.cad group and ask there.

Damir

 

[Helmut Sennewald]

Hello Franck,
don't forget to take a look to other SPICE programs if you are free in your
choice .
Here is the link to the free LTSPICE.
http://ltspice.linear.com/software/swcadiii.exe

There is also a news group with hundreds of examples and about 4600
messages.

http://groups.yahoo.com/group/LTspice/

Best Regards,
Helmut

"Franck" <nospam@free.fr> schrieb im Newsbeitrag
news:41f231f2$0$26195$626a14ce@news.free.fr...

Hi,

I have downloaded SuperSpice and I don't anderstand how it's works.

1) In the example called "impedance.sss" there is 2 curves in the graph,
where are define theses curves ?
How to remove one curve ?

2) To begin, I would like to plot the curve of the load of a capacitor
through a resistor in function of time.
see my file here: http://franckcl.free.fr/sspice.sss

How to do this ?

Thank you
Franck

 

[Franck]

Thank you all,
I have found how to do with a transient run.
Franck


"Franck" <nospam@free.fr> a écrit dans le message de
news:41f231f2$0$26195$626a14ce@news.free.fr...

Hi,

I have downloaded SuperSpice and I don't anderstand how it's works.

1) In the example called "impedance.sss" there is 2 curves in the graph,
where are define theses curves ?
How to remove one curve ?

2) To begin, I would like to plot the curve of the load of a capacitor
through a resistor in function of time.
see my file here: http://franckcl.free.fr/sspice.sss

How to do this ?

Thank you
Franck