Suggestions Replacing P4 CPU Heat Sink Retainer?

[KenO]

Inherited a Dell Dimension 2300 that suddenly shut down for some
reason besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat sink
retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which appears
to be screwed onto the motherboard and surrounds the CPU socket. On of
the 'legs' which sticks up from this has broken. As a result one end
of the heatsink cannot be tightly clamped to the CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/thread/aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same place
in the shop for 5 years) I found one of the heatsink retainers just
lying in the case. Upon furter inspection i found that the plasic
square box that is mounted to the motherboard that the heatsink
attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have
not found anything of interest.

Am open to any comments, suggestions, tips...

Thanks

Ken

 

[Ian Field]

"KenO" <kenitholson@yahoo.com> wrote in message
news:8e4499ae-01b6-40ac-9c93-d1b3d914be2b@r9g2000yql.googlegroups.com...

Inherited a Dell Dimension 2300 that suddenly shut down for some
reason besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat sink
retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which appears
to be screwed onto the motherboard and surrounds the CPU socket. On of
the 'legs' which sticks up from this has broken. As a result one end
of the heatsink cannot be tightly clamped to the CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/thread/aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same place
in the shop for 5 years) I found one of the heatsink retainers just
lying in the case. Upon furter inspection i found that the plasic
square box that is mounted to the motherboard that the heatsink
attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have
not found anything of interest.

Am open to any comments, suggestions, tips...

Sign up to freecycle & freegle and scrounge a PC that's 2 or 3x faster and
doesn't have its CPU cooler falling off.

 

[Michael A. Terrell]

KenO wrote:

Inherited a Dell Dimension 2300 that suddenly shut down for some
reason besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat sink
retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which appears
to be screwed onto the motherboard and surrounds the CPU socket. On of
the 'legs' which sticks up from this has broken. As a result one end
of the heatsink cannot be tightly clamped to the CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/thread/aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same place
in the shop for 5 years) I found one of the heatsink retainers just
lying in the case. Upon furter inspection i found that the plasic
square box that is mounted to the motherboard that the heatsink
attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have
not found anything of interest.

Am open to any comments, suggestions, tips...

Pentium 4 Socket 478 Heatsink Retention Module $1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU


--
It's easy to think outside the box, when you have a cutting torch.

 

[Meat Plow]

On Wed, 13 Jul 2011 16:26:58 -0400, Michael A. Terrell wrote:

KenO wrote:

Inherited a Dell Dimension 2300 that suddenly shut down for some reason
besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat sink
retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which appears to
be screwed onto the motherboard and surrounds the CPU socket. On of the
'legs' which sticks up from this has broken. As a result one end of the
heatsink cannot be tightly clamped to the CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/thread/
aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink

+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same place
in the shop for 5 years) I found one of the heatsink retainers just
lying in the case. Upon furter inspection i found that the plasic
square box that is mounted to the motherboard that the heatsink
attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have not
found anything of interest.

Am open to any comments, suggestions, tips...


Pentium 4 Socket 478 Heatsink Retention Module $1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU

Those don't always work on Dell. Last one I worked on the bolt pattern
didn't line up with the holes in the mainboard. Most dell desktop used
a single 120mm fan mounted on back drawing air through a shroud encasing
a heatsink of fins that was about 4 or 5 inches tall. This one was in
pieces when it was given to me and part of the original retainer were
missing. This was an LGA also. I did find the missing part later at a
PC shop a friend owns. He said he had just had one in that the mainboard
was toast. Not a great machine, hyperthreading single core 3.0 ghz Intel.
Got to have at least a dual core these days.


--
Live Fast Die Young, Leave A Pretty Corpse

 

On Thu, 14 Jul 2011 00:31:32 +0000 (UTC), Meat Plow
<mhywattt@yahoo.com> wrote:

On Wed, 13 Jul 2011 16:26:58 -0400, Michael A. Terrell wrote:

KenO wrote:

Inherited a Dell Dimension 2300 that suddenly shut down for some reason
besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat sink
retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which appears to
be screwed onto the motherboard and surrounds the CPU socket. On of the
'legs' which sticks up from this has broken. As a result one end of the
heatsink cannot be tightly clamped to the CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/thread/
aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink
+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same place
in the shop for 5 years) I found one of the heatsink retainers just
lying in the case. Upon furter inspection i found that the plasic
square box that is mounted to the motherboard that the heatsink
attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have not
found anything of interest.

Am open to any comments, suggestions, tips...


Pentium 4 Socket 478 Heatsink Retention Module $1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU

Those don't always work on Dell. Last one I worked on the bolt pattern
didn't line up with the holes in the mainboard. Most dell desktop used
a single 120mm fan mounted on back drawing air through a shroud encasing
a heatsink of fins that was about 4 or 5 inches tall. This one was in
pieces when it was given to me and part of the original retainer were
missing. This was an LGA also. I did find the missing part later at a
PC shop a friend owns. He said he had just had one in that the mainboard
was toast. Not a great machine, hyperthreading single core 3.0 ghz Intel.
Got to have at least a dual core these days.
Ahh, the luxury of unreasonable feelings of entitlement!!!

An acquaintance sent over a Thinkpad X40 a couple of weeks ago. He'd
picked it up for $20 at a flea market. 1.2Ghz Pentium M, 500 Megs of
RAM, 20 Gig hard drive, wireless networking, no CD drive, Win XP. He
thought he had 'bricked' it trying to install Win7 from a thumb drive.
After 5 minutes investigation I found the 'clover leaf' power cord was
bad. I hook up a good power cord, it works, the battery even takes a
charge, and send it back to him.

A week later he reports he added another Gig of RAM ($30) a new power
cord ($5), and Win7 and it works wonderfully. "It's the ideal system
to use at a coffee shop".

So for under $100 (a significant portion of which was for shipping)
he's got something that is faster than an iPad, has a real keyboard,
and can be upgraded. Not all people measure their importance by the
speed of their computer.

PlainBill

 

[Ian Field]

<PlainBill@yawhoo.com> wrote in message
news:skgu17ttc6j1tem4ue5clos8go24ga2ija@4ax.com...

On Thu, 14 Jul 2011 00:31:32 +0000 (UTC), Meat Plow
mhywattt@yahoo.com> wrote:

On Wed, 13 Jul 2011 16:26:58 -0400, Michael A. Terrell wrote:

KenO wrote:

Inherited a Dell Dimension 2300 that suddenly shut down for some reason
besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat sink
retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which appears to
be screwed onto the motherboard and surrounds the CPU socket. On of the
'legs' which sticks up from this has broken. As a result one end of the
heatsink cannot be tightly clamped to the CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/thread/
aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink
+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same place
in the shop for 5 years) I found one of the heatsink retainers just
lying in the case. Upon furter inspection i found that the plasic
square box that is mounted to the motherboard that the heatsink
attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have not
found anything of interest.

Am open to any comments, suggestions, tips...


Pentium 4 Socket 478 Heatsink Retention Module $1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU

Those don't always work on Dell. Last one I worked on the bolt pattern
didn't line up with the holes in the mainboard. Most dell desktop used
a single 120mm fan mounted on back drawing air through a shroud encasing
a heatsink of fins that was about 4 or 5 inches tall. This one was in
pieces when it was given to me and part of the original retainer were
missing. This was an LGA also. I did find the missing part later at a
PC shop a friend owns. He said he had just had one in that the mainboard
was toast. Not a great machine, hyperthreading single core 3.0 ghz Intel.
Got to have at least a dual core these days.
Ahh, the luxury of unreasonable feelings of entitlement!!!

An acquaintance sent over a Thinkpad X40 a couple of weeks ago. He'd
picked it up for $20 at a flea market. 1.2Ghz Pentium M, 500 Megs of
RAM, 20 Gig hard drive, wireless networking, no CD drive, Win XP. He
thought he had 'bricked' it trying to install Win7 from a thumb drive.
After 5 minutes investigation I found the 'clover leaf' power cord was
bad. I hook up a good power cord, it works, the battery even takes a
charge, and send it back to him.

A week later he reports he added another Gig of RAM ($30) a new power
cord ($5), and Win7 and it works wonderfully. "It's the ideal system
to use at a coffee shop".

So for under $100 (a significant portion of which was for shipping)
he's got something that is faster than an iPad, has a real keyboard,
and can be upgraded. Not all people measure their importance by the
speed of their computer.

PlainBill

Something like that would be perfect for reading my collection of e-books
while sitting on the bog.

 

[Meat Plow]

On Thu, 14 Jul 2011 12:44:24 -0700, PlainBill wrote:

On Thu, 14 Jul 2011 00:31:32 +0000 (UTC), Meat Plow <mhywattt@yahoo.com
wrote:

On Wed, 13 Jul 2011 16:26:58 -0400, Michael A. Terrell wrote:

KenO wrote:

Inherited a Dell Dimension 2300 that suddenly shut down for some
reason besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat sink
retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which appears
to be screwed onto the motherboard and surrounds the CPU socket. On
of the 'legs' which sticks up from this has broken. As a result one
end of the heatsink cannot be tightly clamped to the CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/
thread/
aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink
+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same
place in the shop for 5 years) I found one of the heatsink retainers
just lying in the case. Upon furter inspection i found that the
plasic square box that is mounted to the motherboard that the
heatsink attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have
not found anything of interest.

Am open to any comments, suggestions, tips...


Pentium 4 Socket 478 Heatsink Retention Module $1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU

Those don't always work on Dell. Last one I worked on the bolt pattern
didn't line up with the holes in the mainboard. Most dell desktop used a
single 120mm fan mounted on back drawing air through a shroud encasing a
heatsink of fins that was about 4 or 5 inches tall. This one was in
pieces when it was given to me and part of the original retainer were
missing. This was an LGA also. I did find the missing part later at a PC
shop a friend owns. He said he had just had one in that the mainboard
was toast. Not a great machine, hyperthreading single core 3.0 ghz
Intel. Got to have at least a dual core these days.
Ahh, the luxury of unreasonable feelings of entitlement!!!

An acquaintance sent over a Thinkpad X40 a couple of weeks ago. He'd
picked it up for $20 at a flea market. 1.2Ghz Pentium M, 500 Megs of
RAM, 20 Gig hard drive, wireless networking, no CD drive, Win XP. He
thought he had 'bricked' it trying to install Win7 from a thumb drive.
After 5 minutes investigation I found the 'clover leaf' power cord was
bad. I hook up a good power cord, it works, the battery even takes a
charge, and send it back to him.

A week later he reports he added another Gig of RAM ($30) a new power
cord ($5), and Win7 and it works wonderfully. "It's the ideal system to
use at a coffee shop".

So for under $100 (a significant portion of which was for shipping) he's
got something that is faster than an iPad, has a real keyboard, and can
be upgraded. Not all people measure their importance by the speed of
their computer.

PlainBill

My Dell Mini 910 with 8 gig SSD runs 7 Professional perfectly It has an
Intel Atom hyperthreading CPU that runs at 1.3 ghz and 2 gigs of DDR2
ram. I have an additional 8 gig SD card in it for storage. Cold boot time
to login screen is about 30 seconds. So I'm not bashing lower performance
computers. Just for some things, a dual core is needed. I upgraded my
son's HT 3.0 ghz single intel to a dual core, he plays games. It
increased his video frame rate from 15 fps to 30. Some of those games
need at least a dual core. Myself I run a quad core AMD Phenom II 955
on an Asus M48At-E mobo with 4 gigs Corsair DDR3 FSB at 1600 MHZ.
I can encode raw avi video into MPEG2 at about 200 FPS. What took hours
on a single core 2.0 GHZ AMD64 now takes minutes. So again it all has its
place. I still have an Asus M6Bne, 1.8 ghz 15.4 widescreen laptop from
2004 I use daily. And an Athalon T-Bird 1.0 ghz box downstairs not being
used.



--
Live Fast Die Young, Leave A Pretty Corpse

 

[KenO]

Hi Everyone,

Thanks for all your comments!

While the cost of the plastic Pentium 4 Socket 478 Heatsink Retention
Module is low ($1.59: http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU
) I am not impressed with the design/quality of this part and would
like to do a more reliable repair.

Also agree with Meat Plow "Those don't always work on Dell. Last one
I worked on the bolt pattern didn't line up with the holes in the
mainboard. Most dell desktop used a single 120mm fan mounted on back
drawing air through a shroud encasing a heatsink of fins that was
about 4 or 5 inches tall." This is the setup for the Dell Dimension
2300.

Meat Plow "This one was in pieces when it was given to me and part of
the original retainer were missing." Did you ever get this PC
working? If so did you get another Dell Heatsink Retention Module or
repair the original one?

Ken

 

[Michael A. Terrell]

KenO wrote:

Hi Everyone,

Thanks for all your comments!

While the cost of the plastic Pentium 4 Socket 478 Heatsink Retention
Module is low ($1.59: http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU
) I am not impressed with the design/quality of this part and would
like to do a more reliable repair.

I don't really care. All the plastic mounts are cheap. I also don't
think much of Dell motherboards.


--
It's easy to think outside the box, when you have a cutting torch.

 

On Thu, 14 Jul 2011 21:41:11 +0000 (UTC), Meat Plow
<mhywattt@yahoo.com> wrote:

On Thu, 14 Jul 2011 12:44:24 -0700, PlainBill wrote:

On Thu, 14 Jul 2011 00:31:32 +0000 (UTC), Meat Plow <mhywattt@yahoo.com
wrote:

On Wed, 13 Jul 2011 16:26:58 -0400, Michael A. Terrell wrote:

KenO wrote:

Inherited a Dell Dimension 2300 that suddenly shut down for some
reason besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat sink
retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which appears
to be screwed onto the motherboard and surrounds the CPU socket. On
of the 'legs' which sticks up from this has broken. As a result one
end of the heatsink cannot be tightly clamped to the CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/
thread/
aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink
+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same
place in the shop for 5 years) I found one of the heatsink retainers
just lying in the case. Upon furter inspection i found that the
plasic square box that is mounted to the motherboard that the
heatsink attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have
not found anything of interest.

Am open to any comments, suggestions, tips...


Pentium 4 Socket 478 Heatsink Retention Module $1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU

Those don't always work on Dell. Last one I worked on the bolt pattern
didn't line up with the holes in the mainboard. Most dell desktop used a
single 120mm fan mounted on back drawing air through a shroud encasing a
heatsink of fins that was about 4 or 5 inches tall. This one was in
pieces when it was given to me and part of the original retainer were
missing. This was an LGA also. I did find the missing part later at a PC
shop a friend owns. He said he had just had one in that the mainboard
was toast. Not a great machine, hyperthreading single core 3.0 ghz
Intel. Got to have at least a dual core these days.
Ahh, the luxury of unreasonable feelings of entitlement!!!

An acquaintance sent over a Thinkpad X40 a couple of weeks ago. He'd
picked it up for $20 at a flea market. 1.2Ghz Pentium M, 500 Megs of
RAM, 20 Gig hard drive, wireless networking, no CD drive, Win XP. He
thought he had 'bricked' it trying to install Win7 from a thumb drive.
After 5 minutes investigation I found the 'clover leaf' power cord was
bad. I hook up a good power cord, it works, the battery even takes a
charge, and send it back to him.

A week later he reports he added another Gig of RAM ($30) a new power
cord ($5), and Win7 and it works wonderfully. "It's the ideal system to
use at a coffee shop".

So for under $100 (a significant portion of which was for shipping) he's
got something that is faster than an iPad, has a real keyboard, and can
be upgraded. Not all people measure their importance by the speed of
their computer.

PlainBill

My Dell Mini 910 with 8 gig SSD runs 7 Professional perfectly It has an
Intel Atom hyperthreading CPU that runs at 1.3 ghz and 2 gigs of DDR2
ram. I have an additional 8 gig SD card in it for storage. Cold boot time
to login screen is about 30 seconds. So I'm not bashing lower performance
computers. Just for some things, a dual core is needed. I upgraded my
son's HT 3.0 ghz single intel to a dual core, he plays games. It
increased his video frame rate from 15 fps to 30. Some of those games
need at least a dual core. Myself I run a quad core AMD Phenom II 955
on an Asus M48At-E mobo with 4 gigs Corsair DDR3 FSB at 1600 MHZ.
I can encode raw avi video into MPEG2 at about 200 FPS. What took hours
on a single core 2.0 GHZ AMD64 now takes minutes. So again it all has its
place. I still have an Asus M6Bne, 1.8 ghz 15.4 widescreen laptop from
2004 I use daily. And an Athalon T-Bird 1.0 ghz box downstairs not being
used.
You mention two purposes where higher performance is appropriate.

I'm of the opinion that few people (other than professional game
developers) NEED a higher performance system. Encoding video can be a
different matter. Years ago I discovered a 2.4Ghz P4 with 1 Gig of
RAM could transcode a AVI file into DVD format VIRTUALLY in a matter
of minutes - I started the process before going to bed, in the morning
there was a DVD waiting.

Not that there is something wrong with using a high performance system
for trivial purposes; Intel and AMD's bottom line would be less
impressive if the only market for their high end processors was Civil
Engineers designing a suspension bridge.

PlainBill

 

[doug]

On Jul 13, 8:03 pm, KenO <kenithol...@yahoo.com> wrote:

Inherited a Dell Dimension 2300 that suddenly shut down for some
reason besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat sink
retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which appears
to be screwed onto the motherboard and surrounds the CPU socket. On of
the 'legs' which sticks up from this has broken. As a result one end
of the heatsink cannot be tightly clamped to the CPU.http://groups.google..com/group/uk.comp.homebuilt/browse_thread/thread...

"When i opened the box to clean it out (been sitting in the same place
in the shop for 5 years) I found one of the heatsink retainers just
lying in the case. Upon furter inspection i found that the plasic
square box that is mounted to the motherboard that the heatsink
attaches to is broken."http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have
not found anything of interest.

Am open to any comments, suggestions, tips...

Thanks

Ken

I had this same problem on a 2350 dell. I simply made
new retaining clips from metal strips.works ok.

 

[Aliem]

doug <doug.morsit@gmail.com> wrote in
<news:85e2730f-f419-4fb3-86d1-28e46d2186a1@v7g2000vbk.googlegroups.com>:

On Jul 13, 8:03 pm, KenO <kenithol...@yahoo.com> wrote:
Inherited a Dell Dimension 2300 that suddenly shut down for some
reason besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat sink
retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which appears
to be screwed onto the motherboard and surrounds the CPU socket. On of
the 'legs' which sticks up from this has broken. As a result one end
of the heatsink cannot be tightly clamped to the CPU.http://groups.google.com/group/uk.comp.homebuilt/browse_thread/thread...

"When i opened the box to clean it out (been sitting in the same place
in the shop for 5 years) I found one of the heatsink retainers just
lying in the case. Upon furter inspection i found that the plasic
square box that is mounted to the motherboard that the heatsink
attaches to is broken."http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have
not found anything of interest.

Am open to any comments, suggestions, tips...

Thanks

Ken

I had this same problem on a 2350 dell. I simply made
new retaining clips from metal strips.works ok.

I had a similar problem with a Dell XPS 200 that a client had problems
with. The CPU heatsink mounting screws had pulled out of their tapped
holes in the motherboard backing plate, causing the CPU to overheat
and the fan to run at full speed all the time, which was very noisy.

Fixed it by getting longer screws and four nuts. Used the nuts, rather
than the tapped holes in the motherboard backing plate, and it worked
a treat. Still in use today, as a matter of fact. It's a bit of a pain
to have to remove the covers on both sides (to get to the nuts, so the
screws can be loosened) just to remove the heatsink for cleaning and
re-application of TIM, but at least the CPU isn't overheating now, and
the fan stays at a sane (and quiet) speed.

That's why I build my own computers. Time was, way back when Dell was
new, that they built quality machines. Now they're glorified eMachines
with a higher price tag.


--

___ ___ ___ ___
/ /\ / /\ ___ / /\ / /\
/ /::\ / /:/ /__/\ / /::\ / /::|
/ /:/\:\ / /:/ \__\:\ / /:/\:\ / /:|:|
/ /::\ \:\ / /:/ / /::\ / /::\ \:\ / /:/|:|__
/__/:/\:\_\:\ /__/:/ __/ /:/\/ /__/:/\:\ \:\ /__/:/ |:| /\
\__\/ \:\/:/ \ \:\ /__/\/:/ \ \:\ \:\_\/ \__\/ |:|/:/
\__\::/ \ \:\ \ \::/ \ \:\ \:\ | |:/:/
/ /:/ \ \:\ \ \:\ \ \:\_\/ |__|::/
/__/:/ \ \:\ \__\/ \ \:\ /__/:/
\__\/ \__\/ \__\/ \__\/


WHO IS 'MEAT PLOW' from Alt.Usenet.Kooks (AUK)?

The obese, abusive, ugly, snaggle-toothed, giant-headed, gay 'bear'
biker retard who likes to surf gay porn sites as 'BlancoBear' while
wearing only assless chaps:

William Malone Griffith, Jr.
(aka Milt, Meat Plow, BlancoBear, Meat@petitmorte.net, Tripp)
308 10th Street NE
North Canton, OH 44720-2023

Some of this sick fuck's best work, and comments from others about
him:
http://groups.google.com/group/alt.buzzard.rules/msg/f630759d6303a19d
Message-ID: <SFexc.17128428$Of.2846155@news.easynews.com>

Willy claims to be a member of SPUTUM (Subgenius Police, Usenet
Tactical Unit, Mobile), but subgenius doesn't even BEGIN to describe
Willy...
http://groups.google.com/group/soc.net-people/msg/b42fac45ef5210f9
Is yer CapsLock on, Willy?

Evidence that Meat Plow is William Malone Griffith, II:
--------------------
http://groups.google.com/group/alt.usenet.kooks/msg/5650f8e1e7dedefa
Message-ID: <fc5167ee7ad8e6f64bbe528026c00d98@rip.ax.lt>

http://groups.google.com/group/sci.electronics.repair/msg/e52ffbb346f5b764
Message-ID: <ac995ab01f76a177f4012486eb671c0e@rip.ax.lt>

http://groups.google.com/group/alt.usenet.kooks/msg/a94a2a11df601e39
Message-ID: <f6ccd46e74bff6e99d49781388db38c7@rip.ax.lt>

http://groups.google.com/group/sci.electronics.repair/msg/ef80aad2e7db945d
Message-ID: <2abe74de52d65b6046cc0bdd3c108d86@rip.ax.lt>
--------------------

Meat Plow personal info:
--------------------
Birthdate: Oct 3, 1955

Amateur Radio callsign N8NCX
Technician Plus
(2 meter, 6 meter)
--------------------


--------------------
Photo of MeatPlow in Belden Village Music store (his sister's music
store):
(Note the guitars in the background, the planet-sized head,
the rotten-Chiclet teeth, and general look of retardation)
http://www.productwiki.com/william-malone-griffith-ii/lists/
http://images.productwiki.com/upload/images/william_malone_griffith_ii_avatar_1_0-150-150.jpg

Photo of William Malone Griffith, Jr. from uffnet.com:
(Note that it's the same person as in the photo above)
http://www.uffnet.com/library/headlines/images/news1376621745xlb.jpg

He's got his father's nose and eyes:
http://www.legacy.com/guestbook/kentucky/guestbook.aspx?pid=2527782
http://mi-cache.legacy.com/usercontent/guestbook/photos/2005-09/6966764.jpg
--------------------

Meat Plow email addresses:
--------------------
http://web.archive.org/web/20010305113423/http://www.k1hk.org/ugb_archive3.html
"Bill N8NCX wgriffit@neo.rr.com"

wgriffit at neo.rr.com (neo = North East Ohio)
mhywattt at yahoo.com
mhywatt at yahoo.com
--------------------

Meat Plow admits to being from Ohio:
--------------------
Message-ID: <pan.2011.05.17.23.07.01@emutt.macspoofer.lmao>
Message-ID: <pan.2011.05.17.23.09.38@emutt.macspoofer.lmao>
--------------------

Meat Plow's brushes with the law:
--------------------
1}
http://www.starkcountycjis.org/crim/crim_display_docket_main?pass_case_no=11543&pass_case_type=VBD&pass_case_year=2002&pass_first_name=William&pass_last_name=Griffith

2}
http://www.starkcountycjis.org/civil/civil_display_docket_main?case_year_no=2009-3533&litigant_txt=Griffith
--------------------

Meat Plow quotes:
--------------------
Message-ID: <pan.2011.05.18.22.21.28@emutt.macspoofer.lmao>
"I have no shame here in Usenet."

Message-ID: <pan.2011.05.20.01.22.52@emutt.macspoofer.lmao>
"I'd bet $200.00 of that Keiser money you still have that you will
leave before me."

Meat Plow describes his high-powered legal team:
Message-ID: <pan.2011.05.25.00.08.32@emutt.macspoofer.lmao>
"You know i have a legal team who specializes in internet law. And I
won't hesitate to get them in on the action."

Message-ID: <pan.2011.05.25.00.16.43@emutt.macspoofer.lmao>
"I haven't changed nor do I plan on it any time in the near future.
And yes I am bullet-proof as I have proved it."

Meat Plow visits a massage parlor for a Happy Ending massage.
But they refused to give him a Happy Ending his second time there.
That explains why he's gay, he can't even PAY for HAND JOBS from
women.
-----
http://www.clreviews.com/forums/showpost.php?p=11679
"One time I got a HE, and the 2nd time I didn't. I was asked if I was
there both times and said I was. That's is why I didn't know if I said
something wrong the 2nd time which made me not get a HE."

Well, at least we know what he does with his weekends.
-----

Meat Plow losing his connection to reality, insinuating that he's law
enforcement:
Message-ID: <pan.2011.07.02.00.58.38@emutt.macspoofer.lmao>
"I could be LE posing as Meat Plow. It can't be dis-proven."

--------------------


Oh, William, what would yer family say if they learned yer secrets?

Mother:
...----------------------------.
Catherine & Angelo Griffith

4760 Echovalley St. NW
North Canton, OH 44720-7504
330-494-5785
'----------------------------'


Sister:
...----------------------------------------.
Pamela L. & Roger R. Werling
{ son Todd E. Werling (Ft. Wayne, IN) }
{ son Chris (Kennesaw, GA) }
{ son Keith (Ft. Wayne, IN) }
{ grandson Easton }
{ grandson Zakary }
{ granddaughter Camella }

7704 Bisque Court
Fort Wayne, IN 46825-3501
260-489-6086
'----------------------------------------'


Sister:
...----------------------------------------------.
Cheryl J. & Jason 'Sparky' Humberto E. Rivera
{ daughter Christina }
{ daughter Rosalio (North Canton, OH) }
{ daughter Maria (North Canton, OH) }
{ son Len Gray (Ft. Worth, TX) }

5225 Echo Valley St. NW
North Canton, OH 44720-9702
----------------------------------------------
Belden Village Music
6787 Wales Ave NW
North Canton, OH 44720
beldenvillagemusic.com
330-497-9292
----------------------------------------------
Rosalio B & Maria I Rivera
444 Wales Rd. NE
Massillon, OH 44646-5875
330-833-4291
----------------------------------------------
PO Box 35093
Canton, OH 44735
'----------------------------------------------'


Sister:
...---------------------------------------.
Carol L. & Ric A. Campbell
{ son Richard }
{ son Christopher (North Canton, OH) }
{ son Brandon († 30 May 1996) }
{ daughter Erin }

6794 William Tell Ave NW
North Canton, OH 44720-6546
330-497-7980
330-499-5107
---------------------------------------
PO Box 36473
Canton, OH 44735
'---------------------------------------'


Sister:
...----------------------------------.
Christine H. & Shelton M. Vick
{ son Matthew }

3915 Harvard Ave NW
Canton, OH 44709-1538
330-493-5645
----------------------------------
Re/Max Edge Realty
North Canton / Massillon / Canton
Realtor Christine H. Vick

6929 Portage St. NW
North Canton, OH 44720-6535
330-236-5100
888-830-6509 (fax)
330-904-0883 (cell)
www.MyOhioHomeFinder.com
MyOhioHomeFinder@gmail.com
'----------------------------------'


Sister:
...----------------------------.
Angela C. & Mark Warshefski

11 SE 12th St.
Pompano Beach, FL 33060
954-785-4716
----------------------------
4760 Echovalley St. NW
North Canton, OH 44720-7504
330-942-0584
'----------------------------'


Cousin:
...-------------------------.
Eddy Dailey

Bergholz Super Mart
861 Washington St.
Bergholz, OH 43908
740-768-1018
-------------------------
Bergholz Financial Corp.
dba SuperMart
PO Box 545
524 Garfield St.
Bergholz, OH 43908
'-------------------------'


Cousin:
...--------------------.
Donna L. Dailey

524 5th St.
Bergholz, OH 43908
740-768-2416
--------------------
Bergholz Super Mart
861 Washington St.
Bergholz, OH 43908
740-768-1018
--------------------
Bergholz, OH EMT
'--------------------'


Cousin:
...-------------------.
Bill & Joyce Leas
{ son Billy }

243 2nd St.
Bergholz, OH 43908
'-------------------'


Niece:
...---------------------------.
Rachel & Adam T. Livengood
{ son Lukas }
{ daughter Lauren }

6342 Palmer Dr. NW
Canton, OH 44718
330-497-7754
'---------------------------'


Izzatchoo, or yer dead daddy?
...--------------------------------.
William M. Griffith

between 3rd and 4th St.
between Monroe and Lincoln Ave.
Bergholz, OH 43908
740-768-2539
'--------------------------------'


What would yer landlord for 308 10th St. NE,
North Canton, OH say if they learned yer secrets?
...----------------------------.
David S. and Joan R. Shaner

2095 Waterbury Dr.
Uniontown OH 44312
330-699-4042
'----------------------------'


What would the employees at yer family's
business say if they learned yer secrets?
...-----------------------------------------.
Ohio Kentucky Oil Corporation
aka Ohio Oil & Gas Exploration (defunct)
aka Ohio Kentucky Coal Company (defunct)

5112 Portage St. NW
Canton, OH 44720-6856
(330) 494-8810
(330) 497-7980
-----------------------------------------
110 E. Lowry Lane
Lexington, KY 40503
(800) BUY 4 OIL
(800) 289-4645
(859) 223-5656
(859) 223-5946
(859) 276-0699 (fax)
(859) 276-3500
(859) 276-4080
-----------------------------------------
http://www.ohiokentuckyoil.com
oilstrike@insightbb.com
admin@ohiokentuckyoil.net
'-----------------------------------------'


----------
Oh, but wait, Ohio Oil & Gas Exploration is no longer incorporated in
Ohio:
Daddy Griffith's petrol exploration company (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:384125

Nor are any of the other businesses yer daddy started. You let them
all fail:
Daddy Griffith's stables (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:377966

Daddy Griffith's motel business (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:377965

Daddy Griffith's drilling company (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:347837

Daddy Griffith's metals business (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:552193

And Ohio Kentucky Oil Corporation is on its last legs, inundated with
securities fraud lawsuits and EPA lawsuits. It's barred from
soliciting investors in Tennessee due to securities fraud, it's under
investigation in Ohio and Kentucky, it owns no oil assets or wells,
and it no longer does any of its own drilling. It'll be gone soon,
too.

And you've squandered everything Daddy Griffith earned from his
businesses, so yer now poor, adding insult to injury.
----------


You being poor is why you issued the following. You knew you didn't
have ten thousand dollars or so to defend yerself against yet another
lawsuit:

William Malone Griffith, II's grovelfest of an apology for being a
fucktard stauker:
==================================================
http://groups.google.com/group/alt.usenet.kooks/browse_thread/thread/8d753c94bd612f4e
http://www.freak-search.com/en/thread/3859383/meat_plow_exposed
http://groups.google.com/group/alt.usenet.kooks/msg/c9fccf0d1ab26ace
Message-ID: <3n4c2e.bi4.17.1@news.alt.net>

Title: Apology to Charles Novins

The witnesses to this abject, groveling apology:

Angela Griffith = Angela C. Griffith-Warshefski, William Malone
Griffith, Jr.'s sister

Catherine Griffith = William Malone Griffith, Jr.'s mother

Julia M. Griffith = ?

Cheri Griffith = Cheryl J. Griffith-Rivera, William Malone Griffith,
Jr.'s sister

Justin M. Griffith = ?

Kristy Griffith = Christine H. Griffith-Vick, William Malone Griffith,
Jr.'s sister

-----

Questions yet to be answered:
Who are Julia M. Griffith and Justin Griffith?

Angela C. Griffith-Warshefski came all the way from Pompano Beach,
Florida to witness and sign MeatPlow's apology letter?

Or did William Malone Griffith, Jr. forge the witness signatures,
which would indicate some level of insincerity in the apology?

If William Malone Griffith, Jr. did indeed forge the witness
signatures, is his family cognizant of him using them in this way?

Who is Deborah Ann Griffith?

-----
Who is Sherri Renee Christie, William D. Christie (age 54) and Lillie
L. Christie, and how are they associated with William Malone Griffith,
II?

1345 Bison St. NW
Massillon, OH 44647
330-833-5313 (Sherri)
330-837-4967 (William)

2524 Meadows Ave NW
Apt. 4
Massillon, OH 44647

PO Box 36221
Canton, OH 44735
-----

==================================================

It's time for a digital enema to flush this turd named William Malone
Griffith, II out of the system.

The exit is -.
|
'-----.
.---. .-----. |
| | '---. | |
'-. `-----|-' |
| '---'
'------------->
thataway

 

[KenO]

Hi Doug,

"I had this same problem on a 2350 dell. I simply made new retaining
clips from metal strips.works ok."

Sounds Good!!!

Any suggestions? Also if you were going to make "new retaining clips"
again, would you make any changes in either design or material?

Ken

 

[Bob Villa]

Aliem

http://www.google.com/url?sa=D&q=http://images.productwiki.com/upload/images/william_malone_griffith_ii_avatar_1_0-150-150.jpg

....and a handsome lad he is too!

 

[Meat Plow]

On Fri, 15 Jul 2011 14:40:21 -0400, Michael A. Terrell wrote:

KenO wrote:

Hi Everyone,

Thanks for all your comments!

While the cost of the plastic Pentium 4 Socket 478 Heatsink Retention
Module is low ($1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU ) I am not
impressed with the design/quality of this part and would like to do a
more reliable repair.


I don't really care. All the plastic mounts are cheap. I also don't
think much of Dell motherboards.

Most Dell mainboards were made by Intel. So you don't like Intel main
boards. Or you don't like Dell's limited BIOS.



--
Live Fast Die Young, Leave A Pretty Corpse

 

[Meat Plow]

On Fri, 15 Jul 2011 17:58:47 -0700, PlainBill wrote:

On Thu, 14 Jul 2011 21:41:11 +0000 (UTC), Meat Plow <mhywattt@yahoo.com
wrote:

On Thu, 14 Jul 2011 12:44:24 -0700, PlainBill wrote:

On Thu, 14 Jul 2011 00:31:32 +0000 (UTC), Meat Plow
mhywattt@yahoo.com> wrote:

On Wed, 13 Jul 2011 16:26:58 -0400, Michael A. Terrell wrote:

KenO wrote:

Inherited a Dell Dimension 2300 that suddenly shut down for some
reason besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat
sink retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which
appears to be screwed onto the motherboard and surrounds the CPU
socket. On of the 'legs' which sticks up from this has broken. As a
result one end of the heatsink cannot be tightly clamped to the
CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/
thread/
aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink
+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same
place in the shop for 5 years) I found one of the heatsink
retainers just lying in the case. Upon furter inspection i found
that the plasic square box that is mounted to the motherboard that
the heatsink attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have
not found anything of interest.

Am open to any comments, suggestions, tips...


Pentium 4 Socket 478 Heatsink Retention Module $1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU

Those don't always work on Dell. Last one I worked on the bolt pattern
didn't line up with the holes in the mainboard. Most dell desktop used
a single 120mm fan mounted on back drawing air through a shroud
encasing a heatsink of fins that was about 4 or 5 inches tall. This
one was in pieces when it was given to me and part of the original
retainer were missing. This was an LGA also. I did find the missing
part later at a PC shop a friend owns. He said he had just had one in
that the mainboard was toast. Not a great machine, hyperthreading
single core 3.0 ghz Intel. Got to have at least a dual core these
days.
Ahh, the luxury of unreasonable feelings of entitlement!!!

An acquaintance sent over a Thinkpad X40 a couple of weeks ago. He'd
picked it up for $20 at a flea market. 1.2Ghz Pentium M, 500 Megs of
RAM, 20 Gig hard drive, wireless networking, no CD drive, Win XP. He
thought he had 'bricked' it trying to install Win7 from a thumb drive.
After 5 minutes investigation I found the 'clover leaf' power cord was
bad. I hook up a good power cord, it works, the battery even takes a
charge, and send it back to him.

A week later he reports he added another Gig of RAM ($30) a new power
cord ($5), and Win7 and it works wonderfully. "It's the ideal system
to use at a coffee shop".

So for under $100 (a significant portion of which was for shipping)
he's got something that is faster than an iPad, has a real keyboard,
and can be upgraded. Not all people measure their importance by the
speed of their computer.

PlainBill

My Dell Mini 910 with 8 gig SSD runs 7 Professional perfectly It has
an Intel Atom hyperthreading CPU that runs at 1.3 ghz and 2 gigs of DDR2
ram. I have an additional 8 gig SD card in it for storage. Cold boot
time to login screen is about 30 seconds. So I'm not bashing lower
performance computers. Just for some things, a dual core is needed. I
upgraded my son's HT 3.0 ghz single intel to a dual core, he plays
games. It increased his video frame rate from 15 fps to 30. Some of
those games need at least a dual core. Myself I run a quad core AMD
Phenom II 955 on an Asus M48At-E mobo with 4 gigs Corsair DDR3 FSB at
1600 MHZ. I can encode raw avi video into MPEG2 at about 200 FPS. What
took hours on a single core 2.0 GHZ AMD64 now takes minutes. So again it
all has its place. I still have an Asus M6Bne, 1.8 ghz 15.4 widescreen
laptop from 2004 I use daily. And an Athalon T-Bird 1.0 ghz box
downstairs not being used.
You mention two purposes where higher performance is appropriate. I'm
of the opinion that few people (other than professional game developers)
NEED a higher performance system. Encoding video can be a different
matter. Years ago I discovered a 2.4Ghz P4 with 1 Gig of RAM could
transcode a AVI file into DVD format VIRTUALLY in a matter of minutes -
I started the process before going to bed, in the morning there was a
DVD waiting.

I've done a lot of home video from 8 and mini DV into DVD. Last one was
with a P4 # 3.0 ghz, hyper threading and 4 gigs of ram. It took hours
to encode a 20 GB raw AVI into DVD using Sony DVD Architect. I'm sorry
but I don't believe you.

Not that there is something wrong with using a high performance system
for trivial purposes; Intel and AMD's bottom line would be less
impressive if the only market for their high end processors was Civil
Engineers designing a suspension bridge.

PlainBill

You are being a bit narrow minded.



--
Live Fast Die Young, Leave A Pretty Corpse

 

[Aliem]

Meat Plow <mhywattt@yahoo.com> wrote in
<news:4rs5su.iho.17.5@news.alt.net>:

On Fri, 15 Jul 2011 17:58:47 -0700, PlainBill wrote:

On Thu, 14 Jul 2011 21:41:11 +0000 (UTC), Meat Plow <mhywattt@yahoo.com
wrote:

On Thu, 14 Jul 2011 12:44:24 -0700, PlainBill wrote:

On Thu, 14 Jul 2011 00:31:32 +0000 (UTC), Meat Plow
mhywattt@yahoo.com> wrote:

On Wed, 13 Jul 2011 16:26:58 -0400, Michael A. Terrell wrote:

KenO wrote:

Inherited a Dell Dimension 2300 that suddenly shut down for some
reason besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat
sink retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which
appears to be screwed onto the motherboard and surrounds the CPU
socket. On of the 'legs' which sticks up from this has broken. As a
result one end of the heatsink cannot be tightly clamped to the
CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/
thread/
aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink
+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same
place in the shop for 5 years) I found one of the heatsink
retainers just lying in the case. Upon furter inspection i found
that the plasic square box that is mounted to the motherboard that
the heatsink attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have
not found anything of interest.

Am open to any comments, suggestions, tips...


Pentium 4 Socket 478 Heatsink Retention Module $1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU

Those don't always work on Dell. Last one I worked on the bolt pattern
didn't line up with the holes in the mainboard. Most dell desktop used
a single 120mm fan mounted on back drawing air through a shroud
encasing a heatsink of fins that was about 4 or 5 inches tall. This
one was in pieces when it was given to me and part of the original
retainer were missing. This was an LGA also. I did find the missing
part later at a PC shop a friend owns. He said he had just had one in
that the mainboard was toast. Not a great machine, hyperthreading
single core 3.0 ghz Intel. Got to have at least a dual core these
days.
Ahh, the luxury of unreasonable feelings of entitlement!!!

An acquaintance sent over a Thinkpad X40 a couple of weeks ago. He'd
picked it up for $20 at a flea market. 1.2Ghz Pentium M, 500 Megs of
RAM, 20 Gig hard drive, wireless networking, no CD drive, Win XP. He
thought he had 'bricked' it trying to install Win7 from a thumb drive.
After 5 minutes investigation I found the 'clover leaf' power cord was
bad. I hook up a good power cord, it works, the battery even takes a
charge, and send it back to him.

A week later he reports he added another Gig of RAM ($30) a new power
cord ($5), and Win7 and it works wonderfully. "It's the ideal system
to use at a coffee shop".

So for under $100 (a significant portion of which was for shipping)
he's got something that is faster than an iPad, has a real keyboard,
and can be upgraded. Not all people measure their importance by the
speed of their computer.

PlainBill

My Dell Mini 910 with 8 gig SSD runs 7 Professional perfectly It has
an Intel Atom hyperthreading CPU that runs at 1.3 ghz and 2 gigs of DDR2
ram. I have an additional 8 gig SD card in it for storage. Cold boot
time to login screen is about 30 seconds. So I'm not bashing lower
performance computers. Just for some things, a dual core is needed. I
upgraded my son's HT 3.0 ghz single intel to a dual core, he plays
games. It increased his video frame rate from 15 fps to 30. Some of
those games need at least a dual core. Myself I run a quad core AMD
Phenom II 955 on an Asus M48At-E mobo with 4 gigs Corsair DDR3 FSB at
1600 MHZ. I can encode raw avi video into MPEG2 at about 200 FPS. What
took hours on a single core 2.0 GHZ AMD64 now takes minutes. So again it
all has its place. I still have an Asus M6Bne, 1.8 ghz 15.4 widescreen
laptop from 2004 I use daily. And an Athalon T-Bird 1.0 ghz box
downstairs not being used.
You mention two purposes where higher performance is appropriate. I'm
of the opinion that few people (other than professional game developers)
NEED a higher performance system. Encoding video can be a different
matter. Years ago I discovered a 2.4Ghz P4 with 1 Gig of RAM could
transcode a AVI file into DVD format VIRTUALLY in a matter of minutes -
I started the process before going to bed, in the morning there was a
DVD waiting.

I've done a lot of home video from 8 and mini DV into DVD. Last one was
with a P4 # 3.0 ghz, hyper threading and 4 gigs of ram. It took hours
to encode a 20 GB raw AVI into DVD using Sony DVD Architect. I'm sorry
but I don't believe you.

Alas, it's true. You see, except on the highest of the high-end,
newest processors, the intercommunication between processor cores
actually slowed some processes down vs. a single-core processor.

But we'll just chalk this up to yet one more thing you know nothing
about, hey.

Not that there is something wrong with using a high performance system
for trivial purposes; Intel and AMD's bottom line would be less
impressive if the only market for their high end processors was Civil
Engineers designing a suspension bridge.

PlainBill

You are being a bit narrow minded.

Not at all. People waste a lot of money buying or building computers
that are orders of magnitude faster than needed for what they intend
to use it for.

For instance, I have a client who purchased the latest (at the time)
6-core Intel CPU and a very expensive motherboard, with 24 GB of RAM,
one of the fastest GPUs out there, a specialized case and custom
cooling system.

What does this client do with the machine? Watches YouTube videos,
reads email, keeps track of diet / caloric intake, and does finances
on it.

None of the programs said client uses require the kind of processing
horsepower the machine's got. When I advised the client that it'd be
more economically advantageous to buy a lower-end machine and put the
saved money to good use elsewhere, it was like talking to a brick
wall. They just HAD to have the latest and greatest, nothing else was
'good enough'.

Now, I've got a similar machine, but I DO put mine to good use. Six
cores (12 threads with hyperthreading), at 3.73 GHz, almost always
maxed out, looking for arbitrage opportunities in currencies via a
complex algorithm that so swamped my old machine that it couldn't
compute the results in real-time. So my purchase of said computer
components was justified (and has already paid for itself many times
over). The client's was not.

See that? Both sides of the coin. Hard to argue with someone who's got
recent, relevant experience on both points of view, hey.

But do go on about wasting money, Willy. We would all love to take
financial advice from a man who, at 56 years of age, is so broke he's
admittedly got to survive on $50 per week of food for two people (and,
in all likelihood, has to get government cheese to supplement his
diet), who has an $8666.97 credit card bill that he's not been able to
pay for two years (and got sued for, by FIA Card Services and Bank Of
America), has to rent his shitshack hovel rather than owning a home,
is considering whoring himself out as a guitar plunker on the weekends
at local dives to earn some extra scratch, and has a broken-down,
bought-used, 8 year old, 80,000 mile GMC junker with a bad engine that
he can't afford to take to a mechanic to get fixed.

So do enlighten us as to yer secrets of financial success, Bill.

--
Live Fat Die Broke, Leave A Pustulent Corpse

Fixed yer .sig to reflect yer reality.

Yer welcome.

Perhaps you should change yer .sig to something that better suits yer
future, such as "My retirement plan is a bullet."


--
___ ___ ___ ___
/\ \ /\__\ ___ /\ \ /\__\
/::\ \ /:/ / /\ \ /::\ \ /::| |
/:/\:\ \ /:/ / \:\ \ /:/\:\ \ /:|:| |
/::\~\:\ \ /:/ / /::\__\ /::\~\:\ \ /:/|:| |__
/:/\:\ \:\__\ /:/__/ __/:/\/__/ /:/\:\ \:\__\ /:/ |:| /\__\
\/__\:\/:/ / \:\ \ /\/:/ / \:\~\:\ \/__/ \/__|:|/:/ /
\::/ / \:\ \ \::/__/ \:\ \:\__\ |:/:/ /
/:/ / \:\ \ \:\__\ \:\ \/__/ |::/ /
/:/ / \:\__\ \/__/ \:\__\ /:/ /
\/__/ \/__/ \/__/ \/__/


WHO IS 'MEAT PLOW' from Alt.Usenet.Kooks (AUK)?

The obese, abusive, ugly, snaggle-toothed, giant-headed, gay 'bear'
biker retard who likes to surf gay porn sites as 'BlancoBear' while
wearing only assless chaps:

William Malone Griffith, Jr.
(aka Milt, Meat Plow, BlancoBear, Meat@petitmorte.net, Tripp)
308 10th Street NE
North Canton, OH 44720-2023

Some of this sick fuck's best work, and comments from others about
him:
http://groups.google.com/group/alt.buzzard.rules/msg/f630759d6303a19d
Message-ID: <SFexc.17128428$Of.2846155@news.easynews.com>

Willy claims to be a member of SPUTUM (Subgenius Police, Usenet
Tactical Unit, Mobile), but subgenius doesn't even BEGIN to describe
Willy...
http://groups.google.com/group/soc.net-people/msg/b42fac45ef5210f9
Is yer CapsLock on, Willy?

Evidence that Meat Plow is William Malone Griffith, II:
--------------------
http://groups.google.com/group/alt.usenet.kooks/msg/5650f8e1e7dedefa
Message-ID: <fc5167ee7ad8e6f64bbe528026c00d98@rip.ax.lt>

http://groups.google.com/group/sci.electronics.repair/msg/e52ffbb346f5b764
Message-ID: <ac995ab01f76a177f4012486eb671c0e@rip.ax.lt>

http://groups.google.com/group/alt.usenet.kooks/msg/a94a2a11df601e39
Message-ID: <f6ccd46e74bff6e99d49781388db38c7@rip.ax.lt>

http://groups.google.com/group/sci.electronics.repair/msg/ef80aad2e7db945d
Message-ID: <2abe74de52d65b6046cc0bdd3c108d86@rip.ax.lt>
--------------------

Meat Plow personal info:
--------------------
Birthdate: Oct 3, 1955

Amateur Radio callsign N8NCX
Technician Plus
(2 meter, 6 meter)
--------------------


--------------------
Photo of MeatPlow in Belden Village Music store (his sister's music
store):
(Note the guitars in the background, the planet-sized head,
the rotten-Chiclet teeth, and general look of retardation)
http://www.productwiki.com/william-malone-griffith-ii/lists/
http://images.productwiki.com/upload/images/william_malone_griffith_ii_avatar_1_0-150-150.jpg

Photo of William Malone Griffith, Jr. from uffnet.com:
(Note that it's the same person as in the photo above)
http://www.uffnet.com/library/headlines/images/news1376621745xlb.jpg

He's got his father's nose and eyes:
http://www.legacy.com/guestbook/kentucky/guestbook.aspx?pid=2527782
http://mi-cache.legacy.com/usercontent/guestbook/photos/2005-09/6966764.jpg
--------------------

Meat Plow email addresses:
--------------------
http://web.archive.org/web/20010305113423/http://www.k1hk.org/ugb_archive3.html
"Bill N8NCX wgriffit@neo.rr.com"

wgriffit at neo.rr.com (neo = North East Ohio)
mhywattt at yahoo.com
mhywatt at yahoo.com
--------------------

Meat Plow admits to being from Ohio:
--------------------
Message-ID: <pan.2011.05.17.23.07.01@emutt.macspoofer.lmao>
Message-ID: <pan.2011.05.17.23.09.38@emutt.macspoofer.lmao>
--------------------

Meat Plow's brushes with the law:
--------------------
1}
http://www.starkcountycjis.org/crim/crim_display_docket_main?pass_case_no=11543&pass_case_type=VBD&pass_case_year=2002&pass_first_name=William&pass_last_name=Griffith

2}
http://www.starkcountycjis.org/civil/civil_display_docket_main?case_year_no=2009-3533&litigant_txt=Griffith
--------------------

Meat Plow quotes:
--------------------
Message-ID: <pan.2011.05.18.22.21.28@emutt.macspoofer.lmao>
"I have no shame here in Usenet."

Message-ID: <pan.2011.05.20.01.22.52@emutt.macspoofer.lmao>
"I'd bet $200.00 of that Keiser money you still have that you will
leave before me."

Meat Plow describes his high-powered legal team:
Message-ID: <pan.2011.05.25.00.08.32@emutt.macspoofer.lmao>
"You know i have a legal team who specializes in internet law. And I
won't hesitate to get them in on the action."

Message-ID: <pan.2011.05.25.00.16.43@emutt.macspoofer.lmao>
"I haven't changed nor do I plan on it any time in the near future.
And yes I am bullet-proof as I have proved it."

Meat Plow visits a massage parlor for a Happy Ending massage.
But they refused to give him a Happy Ending his second time there.
That explains why he's gay, he can't even PAY for HAND JOBS from
women.
-----
http://www.clreviews.com/forums/showpost.php?p=11679
"One time I got a HE, and the 2nd time I didn't. I was asked if I was
there both times and said I was. That's is why I didn't know if I said
something wrong the 2nd time which made me not get a HE."

Well, at least we know what he does with his weekends.
-----

Meat Plow losing his connection to reality, insinuating that he's law
enforcement:
Message-ID: <pan.2011.07.02.00.58.38@emutt.macspoofer.lmao>
"I could be LE posing as Meat Plow. It can't be dis-proven."

--------------------


Oh, William, what would yer family say if they learned yer secrets?

Mother:
...----------------------------.
Catherine & Angelo Griffith

4760 Echovalley St. NW
North Canton, OH 44720-7504
330-494-5785
'----------------------------'


Sister:
...----------------------------------------.
Pamela L. & Roger R. Werling
{ son Todd E. Werling (Ft. Wayne, IN) }
{ son Chris (Kennesaw, GA) }
{ son Keith (Ft. Wayne, IN) }
{ grandson Easton }
{ grandson Zakary }
{ granddaughter Camella }

7704 Bisque Court
Fort Wayne, IN 46825-3501
260-489-6086
'----------------------------------------'


Sister:
...----------------------------------------------.
Cheryl J. & Jason 'Sparky' Humberto E. Rivera
{ daughter Christina }
{ daughter Rosalio (North Canton, OH) }
{ daughter Maria (North Canton, OH) }
{ son Len Gray (Ft. Worth, TX) }

5225 Echo Valley St. NW
North Canton, OH 44720-9702
----------------------------------------------
Belden Village Music
6787 Wales Ave NW
North Canton, OH 44720
beldenvillagemusic.com
330-497-9292
----------------------------------------------
Rosalio B & Maria I Rivera
444 Wales Rd. NE
Massillon, OH 44646-5875
330-833-4291
----------------------------------------------
PO Box 35093
Canton, OH 44735
'----------------------------------------------'


Sister:
...---------------------------------------.
Carol L. & Ric A. Campbell
{ son Richard }
{ son Christopher (North Canton, OH) }
{ son Brandon († 30 May 1996) }
{ daughter Erin }

6794 William Tell Ave NW
North Canton, OH 44720-6546
330-497-7980
330-499-5107
---------------------------------------
PO Box 36473
Canton, OH 44735
'---------------------------------------'


Sister:
...----------------------------------.
Christine H. & Shelton M. Vick
{ son Matthew }

3915 Harvard Ave NW
Canton, OH 44709-1538
330-493-5645
----------------------------------
Re/Max Edge Realty
North Canton / Massillon / Canton
Realtor Christine H. Vick

6929 Portage St. NW
North Canton, OH 44720-6535
330-236-5100
888-830-6509 (fax)
330-904-0883 (cell)
www.MyOhioHomeFinder.com
MyOhioHomeFinder@gmail.com
'----------------------------------'


Sister:
...----------------------------.
Angela C. & Mark Warshefski

11 SE 12th St.
Pompano Beach, FL 33060
954-785-4716
----------------------------
4760 Echovalley St. NW
North Canton, OH 44720-7504
330-942-0584
'----------------------------'


Cousin:
...-------------------------.
Eddy Dailey

Bergholz Super Mart
861 Washington St.
Bergholz, OH 43908
740-768-1018
-------------------------
Bergholz Financial Corp.
dba SuperMart
PO Box 545
524 Garfield St.
Bergholz, OH 43908
'-------------------------'


Cousin:
...--------------------.
Donna L. Dailey

524 5th St.
Bergholz, OH 43908
740-768-2416
--------------------
Bergholz Super Mart
861 Washington St.
Bergholz, OH 43908
740-768-1018
--------------------
Bergholz, OH EMT
'--------------------'


Cousin:
...-------------------.
Bill & Joyce Leas
{ son Billy }

243 2nd St.
Bergholz, OH 43908
'-------------------'


Niece:
...---------------------------.
Rachel & Adam T. Livengood
{ son Lukas }
{ daughter Lauren }

6342 Palmer Dr. NW
Canton, OH 44718
330-497-7754
'---------------------------'


Izzatchoo, or yer dead daddy?
...--------------------------------.
William M. Griffith

between 3rd and 4th St.
between Monroe and Lincoln Ave.
Bergholz, OH 43908
740-768-2539
'--------------------------------'


What would yer landlord for 308 10th St. NE,
North Canton, OH say if they learned yer secrets?
...----------------------------.
David S. and Joan R. Shaner

2095 Waterbury Dr.
Uniontown OH 44312
330-699-4042
'----------------------------'


What would the employees at yer family's
business say if they learned yer secrets?
...-----------------------------------------.
Ohio Kentucky Oil Corporation
aka Ohio Oil & Gas Exploration (defunct)
aka Ohio Kentucky Coal Company (defunct)

5112 Portage St. NW
Canton, OH 44720-6856
(330) 494-8810
(330) 497-7980
-----------------------------------------
110 E. Lowry Lane
Lexington, KY 40503
(800) BUY 4 OIL
(800) 289-4645
(859) 223-5656
(859) 223-5946
(859) 276-0699 (fax)
(859) 276-3500
(859) 276-4080
-----------------------------------------
http://www.ohiokentuckyoil.com
oilstrike@insightbb.com
admin@ohiokentuckyoil.net
'-----------------------------------------'


----------
Oh, but wait, Ohio Oil & Gas Exploration is no longer incorporated in
Ohio:
Daddy Griffith's petrol exploration company (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:384125

Nor are any of the other businesses yer daddy started. You let them
all fail:
Daddy Griffith's stables (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:377966

Daddy Griffith's motel business (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:377965

Daddy Griffith's drilling company (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:347837

Daddy Griffith's metals business (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:552193

And Ohio Kentucky Oil Corporation is on its last legs, inundated with
securities fraud lawsuits and EPA lawsuits. It's barred from
soliciting investors in Tennessee due to securities fraud, it's under
investigation in Ohio and Kentucky, it owns no oil assets or wells,
and it no longer does any of its own drilling. It'll be gone soon,
too.

And you've squandered everything Daddy Griffith earned from his
businesses, so yer now poor, adding insult to injury.
----------


You being poor is why you issued the following. You knew you didn't
have ten thousand dollars or so to defend yerself against yet another
lawsuit:

William Malone Griffith, II's grovelfest of an apology for being a
fucktard stauker:
==================================================
http://groups.google.com/group/alt.usenet.kooks/browse_thread/thread/8d753c94bd612f4e
http://www.freak-search.com/en/thread/3859383/meat_plow_exposed
http://groups.google.com/group/alt.usenet.kooks/msg/c9fccf0d1ab26ace
Message-ID: <3n4c2e.bi4.17.1@news.alt.net>

Title: Apology to Charles Novins

The witnesses to this abject, groveling apology:

Angela Griffith = Angela C. Griffith-Warshefski, William Malone
Griffith, Jr.'s sister

Catherine Griffith = William Malone Griffith, Jr.'s mother

Julia M. Griffith = ?

Cheri Griffith = Cheryl J. Griffith-Rivera, William Malone Griffith,
Jr.'s sister

Justin M. Griffith = ?

Kristy Griffith = Christine H. Griffith-Vick, William Malone Griffith,
Jr.'s sister

-----

Questions yet to be answered:
Who are Julia M. Griffith and Justin M. Griffith?

Angela C. Griffith-Warshefski came all the way from Pompano Beach,
Florida to witness and sign MeatPlow's apology letter?

Or did William Malone Griffith, Jr. forge the witness signatures,
which would indicate some level of insincerity in the apology?

If William Malone Griffith, Jr. did indeed forge the witness
signatures, is his family cognizant of him using them in this way?

Who is Deborah Ann Griffith?

-----
Who is Sherri Renee Christie, William D. Christie (age 54) and Lillie
L. Christie, and how are they associated with William Malone Griffith,
II?

1345 Bison St. NW
Massillon, OH 44647
330-833-5313 (Sherri)
330-837-4967 (William)

2524 Meadows Ave NW
Apt. 4
Massillon, OH 44647

PO Box 36221
Canton, OH 44735
-----

==================================================

It's time for a digital enema to flush this turd named William Malone
Griffith, II out of the system.

The exit is -.
|
'-----.
.---. .-----. |
| | '---. | |
'-. `-----|-' |
| '---'
'------------->
thataway

 

[doug]

On Jul 16, 7:24 pm, KenO <kenithol...@yahoo.com> wrote:

Hi Doug,

"I had this same problem on a 2350 dell. I simply made new retaining
clips from metal strips.works ok."

Sounds Good!!!

Any suggestions?  Also if you were going to make "new retaining clips"
again, would you make any changes in either design or material?

Ken

Hi Ken,well on my p.c. the original retainer clips had nothing
to latch on to,as the plastic `slots` on heatsink base had
broken off.I made up `L` shaped brackets 25mm.by 25mm
with 6mm hole drilled each end,removed 4 screws and lifted
off heatsink base,slid homebrew clips under the base,
refit h.sink base with the screws passing thru` the holes in
the homemade clips.This now gave the original spring clamps
somewhere to hook on to ! Hope you can follow this Ken !
Am not sure how to include a piccy with this post, or would
have taken snap with digi.cam. Still learning here ! !
HTH doug

 

[Aliem]

Meat Plow <mhywattt@yahoo.com> wrote in
<news:4rs4t1.iho.17.4@news.alt.net>:

On Fri, 15 Jul 2011 14:40:21 -0400, Michael A. Terrell wrote:

KenO wrote:

Hi Everyone,

Thanks for all your comments!

While the cost of the plastic Pentium 4 Socket 478 Heatsink Retention
Module is low ($1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU ) I am not
impressed with the design/quality of this part and would like to do a
more reliable repair.

I don't really care. All the plastic mounts are cheap. I also don't
think much of Dell motherboards.

Most Dell mainboards were made by Intel. So you don't like Intel main
boards. Or you don't like Dell's limited BIOS.

Or he doesn't like the quality of the mounting hardware that are used
to fasten the motherboard and coolers, or he doesn't like the fact
that Dell seems to use the cheapest, lowest-end motherboards available
for any given product line, or he doesn't like the fact that Dell uses
proprietary mounting methods for their fans / power supplies /
coolers, or he doesn't like the fact that Dell's quality has suffered
greatly of late, etc., etc.

Dell seems to be going the route of becoming the Apple of PC
products... proprietary, expensive (for what you get) and not quite
suited for doing actual work. A generic toy of a computer best suited
to those who don't tax their machines much beyond checking email.

--
Live Fat Die Broke, Leave A Pustulent Corpse

Fixed yer .sig for you.

Yer welcome.


--

___ ___ ___ ___
/ /\ / /\ ___ / /\ / /\
/ /::\ / /:/ /__/\ / /::\ / /::|
/ /:/\:\ / /:/ \__\:\ / /:/\:\ / /:|:|
/ /::\ \:\ / /:/ / /::\ / /::\ \:\ / /:/|:|__
/__/:/\:\_\:\ /__/:/ __/ /:/\/ /__/:/\:\ \:\ /__/:/ |:| /\
\__\/ \:\/:/ \ \:\ /__/\/:/ \ \:\ \:\_\/ \__\/ |:|/:/
\__\::/ \ \:\ \ \::/ \ \:\ \:\ | |:/:/
/ /:/ \ \:\ \ \:\ \ \:\_\/ |__|::/
/__/:/ \ \:\ \__\/ \ \:\ /__/:/
\__\/ \__\/ \__\/ \__\/


WHO IS 'MEAT PLOW' from Alt.Usenet.Kooks (AUK)?

The obese, abusive, ugly, snaggle-toothed, giant-headed, gay 'bear'
biker retard who likes to surf gay porn sites as 'BlancoBear' while
wearing only assless chaps:

William Malone Griffith, Jr.
(aka Milt, Meat Plow, BlancoBear, Meat@petitmorte.net, Tripp)
308 10th Street NE
North Canton, OH 44720-2023

Some of this sick fuck's best work, and comments from others about
him:
http://groups.google.com/group/alt.buzzard.rules/msg/f630759d6303a19d
Message-ID: <SFexc.17128428$Of.2846155@news.easynews.com>

Willy claims to be a member of SPUTUM (Subgenius Police, Usenet
Tactical Unit, Mobile), but subgenius doesn't even BEGIN to describe
Willy...
http://groups.google.com/group/soc.net-people/msg/b42fac45ef5210f9
Is yer CapsLock on, Willy?

Evidence that Meat Plow is William Malone Griffith, II:
--------------------
http://groups.google.com/group/alt.usenet.kooks/msg/5650f8e1e7dedefa
Message-ID: <fc5167ee7ad8e6f64bbe528026c00d98@rip.ax.lt>

http://groups.google.com/group/sci.electronics.repair/msg/e52ffbb346f5b764
Message-ID: <ac995ab01f76a177f4012486eb671c0e@rip.ax.lt>

http://groups.google.com/group/alt.usenet.kooks/msg/a94a2a11df601e39
Message-ID: <f6ccd46e74bff6e99d49781388db38c7@rip.ax.lt>

http://groups.google.com/group/sci.electronics.repair/msg/ef80aad2e7db945d
Message-ID: <2abe74de52d65b6046cc0bdd3c108d86@rip.ax.lt>
--------------------

Meat Plow personal info:
--------------------
Birthdate: Oct 3, 1955

Amateur Radio callsign N8NCX
Technician Plus
(2 meter, 6 meter)
--------------------


--------------------
Photo of MeatPlow in Belden Village Music store (his sister's music
store):
(Note the guitars in the background, the planet-sized head,
the rotten-Chiclet teeth, and general look of retardation)
http://www.productwiki.com/william-malone-griffith-ii/lists/
http://images.productwiki.com/upload/images/william_malone_griffith_ii_avatar_1_0-150-150.jpg

Photo of William Malone Griffith, Jr. from uffnet.com:
(Note that it's the same person as in the photo above)
http://www.uffnet.com/library/headlines/images/news1376621745xlb.jpg

He's got his father's nose and eyes:
http://www.legacy.com/guestbook/kentucky/guestbook.aspx?pid=2527782
http://mi-cache.legacy.com/usercontent/guestbook/photos/2005-09/6966764.jpg
--------------------

Meat Plow email addresses:
--------------------
http://web.archive.org/web/20010305113423/http://www.k1hk.org/ugb_archive3.html
"Bill N8NCX wgriffit@neo.rr.com"

wgriffit at neo.rr.com (neo = North East Ohio)
mhywattt at yahoo.com
mhywatt at yahoo.com
--------------------

Meat Plow admits to being from Ohio:
--------------------
Message-ID: <pan.2011.05.17.23.07.01@emutt.macspoofer.lmao>
Message-ID: <pan.2011.05.17.23.09.38@emutt.macspoofer.lmao>
--------------------

Meat Plow's brushes with the law:
--------------------
1}
http://www.starkcountycjis.org/crim/crim_display_docket_main?pass_case_no=11543&pass_case_type=VBD&pass_case_year=2002&pass_first_name=William&pass_last_name=Griffith

2}
http://www.starkcountycjis.org/civil/civil_display_docket_main?case_year_no=2009-3533&litigant_txt=Griffith
--------------------

Meat Plow quotes:
--------------------
Message-ID: <pan.2011.05.18.22.21.28@emutt.macspoofer.lmao>
"I have no shame here in Usenet."

Message-ID: <pan.2011.05.20.01.22.52@emutt.macspoofer.lmao>
"I'd bet $200.00 of that Keiser money you still have that you will
leave before me."

Meat Plow describes his high-powered legal team:
Message-ID: <pan.2011.05.25.00.08.32@emutt.macspoofer.lmao>
"You know i have a legal team who specializes in internet law. And I
won't hesitate to get them in on the action."

Message-ID: <pan.2011.05.25.00.16.43@emutt.macspoofer.lmao>
"I haven't changed nor do I plan on it any time in the near future.
And yes I am bullet-proof as I have proved it."

Meat Plow visits a massage parlor for a Happy Ending massage.
But they refused to give him a Happy Ending his second time there.
That explains why he's gay, he can't even PAY for HAND JOBS from
women.
-----
http://www.clreviews.com/forums/showpost.php?p=11679
"One time I got a HE, and the 2nd time I didn't. I was asked if I was
there both times and said I was. That's is why I didn't know if I said
something wrong the 2nd time which made me not get a HE."

Well, at least we know what he does with his weekends.
-----

Meat Plow losing his connection to reality, insinuating that he's law
enforcement:
Message-ID: <pan.2011.07.02.00.58.38@emutt.macspoofer.lmao>
"I could be LE posing as Meat Plow. It can't be dis-proven."

--------------------


Oh, William, what would yer family say if they learned yer secrets?

Mother:
...----------------------------.
Catherine & Angelo Griffith

4760 Echovalley St. NW
North Canton, OH 44720-7504
330-494-5785
'----------------------------'


Sister:
...----------------------------------------.
Pamela L. & Roger R. Werling
{ son Todd E. Werling (Ft. Wayne, IN) }
{ son Chris (Kennesaw, GA) }
{ son Keith (Ft. Wayne, IN) }
{ grandson Easton }
{ grandson Zakary }
{ granddaughter Camella }

7704 Bisque Court
Fort Wayne, IN 46825-3501
260-489-6086
'----------------------------------------'


Sister:
...----------------------------------------------.
Cheryl J. & Jason 'Sparky' Humberto E. Rivera
{ daughter Christina }
{ daughter Rosalio (North Canton, OH) }
{ daughter Maria (North Canton, OH) }
{ son Len Gray (Ft. Worth, TX) }

5225 Echo Valley St. NW
North Canton, OH 44720-9702
----------------------------------------------
Belden Village Music
6787 Wales Ave NW
North Canton, OH 44720
beldenvillagemusic.com
330-497-9292
----------------------------------------------
Rosalio B & Maria I Rivera
444 Wales Rd. NE
Massillon, OH 44646-5875
330-833-4291
----------------------------------------------
PO Box 35093
Canton, OH 44735
'----------------------------------------------'


Sister:
...---------------------------------------.
Carol L. & Ric A. Campbell
{ son Richard }
{ son Christopher (North Canton, OH) }
{ son Brandon († 30 May 1996) }
{ daughter Erin }

6794 William Tell Ave NW
North Canton, OH 44720-6546
330-497-7980
330-499-5107
---------------------------------------
PO Box 36473
Canton, OH 44735
'---------------------------------------'


Sister:
...----------------------------------.
Christine H. & Shelton M. Vick
{ son Matthew }

3915 Harvard Ave NW
Canton, OH 44709-1538
330-493-5645
----------------------------------
Re/Max Edge Realty
North Canton / Massillon / Canton
Realtor Christine H. Vick

6929 Portage St. NW
North Canton, OH 44720-6535
330-236-5100
888-830-6509 (fax)
330-904-0883 (cell)
www.MyOhioHomeFinder.com
MyOhioHomeFinder@gmail.com
'----------------------------------'


Sister:
...----------------------------.
Angela C. & Mark Warshefski

11 SE 12th St.
Pompano Beach, FL 33060
954-785-4716
----------------------------
4760 Echovalley St. NW
North Canton, OH 44720-7504
330-942-0584
'----------------------------'


Cousin:
...-------------------------.
Eddy Dailey

Bergholz Super Mart
861 Washington St.
Bergholz, OH 43908
740-768-1018
-------------------------
Bergholz Financial Corp.
dba SuperMart
PO Box 545
524 Garfield St.
Bergholz, OH 43908
'-------------------------'


Cousin:
...--------------------.
Donna L. Dailey

524 5th St.
Bergholz, OH 43908
740-768-2416
--------------------
Bergholz Super Mart
861 Washington St.
Bergholz, OH 43908
740-768-1018
--------------------
Bergholz, OH EMT
'--------------------'


Cousin:
...-------------------.
Bill & Joyce Leas
{ son Billy }

243 2nd St.
Bergholz, OH 43908
'-------------------'


Niece:
...---------------------------.
Rachel & Adam T. Livengood
{ son Lukas }
{ daughter Lauren }

6342 Palmer Dr. NW
Canton, OH 44718
330-497-7754
'---------------------------'


Izzatchoo, or yer dead daddy?
...--------------------------------.
William M. Griffith

between 3rd and 4th St.
between Monroe and Lincoln Ave.
Bergholz, OH 43908
740-768-2539
'--------------------------------'


What would yer landlord for 308 10th St. NE,
North Canton, OH say if they learned yer secrets?
...----------------------------.
David S. and Joan R. Shaner

2095 Waterbury Dr.
Uniontown OH 44312
330-699-4042
'----------------------------'


What would the employees at yer family's
business say if they learned yer secrets?
...-----------------------------------------.
Ohio Kentucky Oil Corporation
aka Ohio Oil & Gas Exploration (defunct)
aka Ohio Kentucky Coal Company (defunct)

5112 Portage St. NW
Canton, OH 44720-6856
(330) 494-8810
(330) 497-7980
-----------------------------------------
110 E. Lowry Lane
Lexington, KY 40503
(800) BUY 4 OIL
(800) 289-4645
(859) 223-5656
(859) 223-5946
(859) 276-0699 (fax)
(859) 276-3500
(859) 276-4080
-----------------------------------------
http://www.ohiokentuckyoil.com
oilstrike@insightbb.com
admin@ohiokentuckyoil.net
'-----------------------------------------'


----------
Oh, but wait, Ohio Oil & Gas Exploration is no longer incorporated in
Ohio:
Daddy Griffith's petrol exploration company (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:384125

Nor are any of the other businesses yer daddy started. You let them
all fail:
Daddy Griffith's stables (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:377966

Daddy Griffith's motel business (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:377965

Daddy Griffith's drilling company (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:347837

Daddy Griffith's metals business (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:77_CHARTER_NUM:552193

And Ohio Kentucky Oil Corporation is on its last legs, inundated with
securities fraud lawsuits and EPA lawsuits. It's barred from
soliciting investors in Tennessee due to securities fraud, it's under
investigation in Ohio and Kentucky, it owns no oil assets or wells,
and it no longer does any of its own drilling. It'll be gone soon,
too.

And you've squandered everything Daddy Griffith earned from his
businesses, so yer now poor, adding insult to injury.
----------


You being poor is why you issued the following. You knew you didn't
have ten thousand dollars or so to defend yerself against yet another
lawsuit:

William Malone Griffith, II's grovelfest of an apology for being a
fucktard stauker:
==================================================
http://groups.google.com/group/alt.usenet.kooks/browse_thread/thread/8d753c94bd612f4e
http://www.freak-search.com/en/thread/3859383/meat_plow_exposed
http://groups.google.com/group/alt.usenet.kooks/msg/c9fccf0d1ab26ace
Message-ID: <3n4c2e.bi4.17.1@news.alt.net>

Title: Apology to Charles Novins

The witnesses to this abject, groveling apology:

Angela Griffith = Angela C. Griffith-Warshefski, William Malone
Griffith, Jr.'s sister

Catherine Griffith = William Malone Griffith, Jr.'s mother

Julia M. Griffith = ?

Cheri Griffith = Cheryl J. Griffith-Rivera, William Malone Griffith,
Jr.'s sister

Justin M. Griffith = ?

Kristy Griffith = Christine H. Griffith-Vick, William Malone Griffith,
Jr.'s sister

-----

Questions yet to be answered:
Who are Julia M. Griffith and Justin M. Griffith?

Angela C. Griffith-Warshefski came all the way from Pompano Beach,
Florida to witness and sign MeatPlow's apology letter?

Or did William Malone Griffith, Jr. forge the witness signatures,
which would indicate some level of insincerity in the apology?

If William Malone Griffith, Jr. did indeed forge the witness
signatures, is his family cognizant of him using them in this way?

Who is Deborah Ann Griffith?

-----
Who is Sherri Renee Christie, William D. Christie (age 54) and Lillie
L. Christie, and how are they associated with William Malone Griffith,
II?

1345 Bison St. NW
Massillon, OH 44647
330-833-5313 (Sherri)
330-837-4967 (William)

2524 Meadows Ave NW
Apt. 4
Massillon, OH 44647

PO Box 36221
Canton, OH 44735
-----

==================================================

It's time for a digital enema to flush this turd named William Malone
Griffith, II out of the system.

The exit is -.
|
'-----.
.---. .-----. |
| | '---. | |
'-. `-----|-' |
| '---'
'------------->
thataway

 

On Sun, 17 Jul 2011 20:23:24 +0000 (UTC), Meat Plow
<mhywattt@yahoo.com> wrote:

On Fri, 15 Jul 2011 17:58:47 -0700, PlainBill wrote:

On Thu, 14 Jul 2011 21:41:11 +0000 (UTC), Meat Plow <mhywattt@yahoo.com
wrote:

On Thu, 14 Jul 2011 12:44:24 -0700, PlainBill wrote:

On Thu, 14 Jul 2011 00:31:32 +0000 (UTC), Meat Plow
mhywattt@yahoo.com> wrote:

On Wed, 13 Jul 2011 16:26:58 -0400, Michael A. Terrell wrote:

KenO wrote:

Inherited a Dell Dimension 2300 that suddenly shut down for some
reason besides a power outage.

Found reason when opened the case and found a broken P4 cpu heat
sink retainer and loose heat sink.

Did some searching and found others with same problem.

For example:

"The heatsink is clamped onto a black plastic moulding which
appears to be screwed onto the motherboard and surrounds the CPU
socket. On of the 'legs' which sticks up from this has broken. As a
result one end of the heatsink cannot be tightly clamped to the
CPU.
http://groups.google.com/group/uk.comp.homebuilt/browse_thread/
thread/
aa39dd6016df30b9/d2b013fe15c9c2ab?hl=en&q=broken+P4+heat+sink
+retainer#d2b013fe15c9c2ab

"When i opened the box to clean it out (been sitting in the same
place in the shop for 5 years) I found one of the heatsink
retainers just lying in the case. Upon furter inspection i found
that the plasic square box that is mounted to the motherboard that
the heatsink attaches to is broken."
http://forums.pcper.com/showthread.php?t=465220

Since this OEM part tends to fail would like to do a more permanent
repair.

Did a search using [best P4 CPU heat sink retainer] but so far have
not found anything of interest.

Am open to any comments, suggestions, tips...


Pentium 4 Socket 478 Heatsink Retention Module $1.59:
http://www.geeks.com/details.asp?invtid=WRP4-16W1-51&cat=CPU

Those don't always work on Dell. Last one I worked on the bolt pattern
didn't line up with the holes in the mainboard. Most dell desktop used
a single 120mm fan mounted on back drawing air through a shroud
encasing a heatsink of fins that was about 4 or 5 inches tall. This
one was in pieces when it was given to me and part of the original
retainer were missing. This was an LGA also. I did find the missing
part later at a PC shop a friend owns. He said he had just had one in
that the mainboard was toast. Not a great machine, hyperthreading
single core 3.0 ghz Intel. Got to have at least a dual core these
days.
Ahh, the luxury of unreasonable feelings of entitlement!!!

An acquaintance sent over a Thinkpad X40 a couple of weeks ago. He'd
picked it up for $20 at a flea market. 1.2Ghz Pentium M, 500 Megs of
RAM, 20 Gig hard drive, wireless networking, no CD drive, Win XP. He
thought he had 'bricked' it trying to install Win7 from a thumb drive.
After 5 minutes investigation I found the 'clover leaf' power cord was
bad. I hook up a good power cord, it works, the battery even takes a
charge, and send it back to him.

A week later he reports he added another Gig of RAM ($30) a new power
cord ($5), and Win7 and it works wonderfully. "It's the ideal system
to use at a coffee shop".

So for under $100 (a significant portion of which was for shipping)
he's got something that is faster than an iPad, has a real keyboard,
and can be upgraded. Not all people measure their importance by the
speed of their computer.

PlainBill

My Dell Mini 910 with 8 gig SSD runs 7 Professional perfectly It has
an Intel Atom hyperthreading CPU that runs at 1.3 ghz and 2 gigs of DDR2
ram. I have an additional 8 gig SD card in it for storage. Cold boot
time to login screen is about 30 seconds. So I'm not bashing lower
performance computers. Just for some things, a dual core is needed. I
upgraded my son's HT 3.0 ghz single intel to a dual core, he plays
games. It increased his video frame rate from 15 fps to 30. Some of
those games need at least a dual core. Myself I run a quad core AMD
Phenom II 955 on an Asus M48At-E mobo with 4 gigs Corsair DDR3 FSB at
1600 MHZ. I can encode raw avi video into MPEG2 at about 200 FPS. What
took hours on a single core 2.0 GHZ AMD64 now takes minutes. So again it
all has its place. I still have an Asus M6Bne, 1.8 ghz 15.4 widescreen
laptop from 2004 I use daily. And an Athalon T-Bird 1.0 ghz box
downstairs not being used.
You mention two purposes where higher performance is appropriate. I'm
of the opinion that few people (other than professional game developers)
NEED a higher performance system. Encoding video can be a different
matter. Years ago I discovered a 2.4Ghz P4 with 1 Gig of RAM could
transcode a AVI file into DVD format VIRTUALLY in a matter of minutes -
I started the process before going to bed, in the morning there was a
DVD waiting.

I've done a lot of home video from 8 and mini DV into DVD. Last one was
with a P4 # 3.0 ghz, hyper threading and 4 gigs of ram. It took hours
to encode a 20 GB raw AVI into DVD using Sony DVD Architect. I'm sorry
but I don't believe you.

That's because you don't read carefully and lack comprehension.

I set up the transcoding in the evening, just before I go to bed.
The task completes while I am sleeping. From my point of view, my
computer was unavailable only for a few minutes.

Not that there is something wrong with using a high performance system
for trivial purposes; Intel and AMD's bottom line would be less
impressive if the only market for their high end processors was Civil
Engineers designing a suspension bridge.

PlainBill

You are being a bit narrow minded.
And you allow, nay encourage, a few pieces of etched silicon to hold

your sense of self esteem hostage.

PlainBill