D
Daniel Gray
Guest
Greetings all,
I have an HP 3310B Function Generator I've acquired (surplus), that has a
marginal square wave output. The wave shape looks more like a saw tooth,
with the leading edge taller than the trailing edge. Not having a book on
this little beauty, I was wondering if anyone might know if there is an
adjustment available for this characteristic, and if so, where it might be
found.
FWIW I verified probe compensation before viewing wave shape. all other
functions of unit appear fine. Sine triangle waves well defined.
Thanks in advance.
Dan Gray
I have an HP 3310B Function Generator I've acquired (surplus), that has a
marginal square wave output. The wave shape looks more like a saw tooth,
with the leading edge taller than the trailing edge. Not having a book on
this little beauty, I was wondering if anyone might know if there is an
adjustment available for this characteristic, and if so, where it might be
found.
FWIW I verified probe compensation before viewing wave shape. all other
functions of unit appear fine. Sine triangle waves well defined.
Thanks in advance.
Dan Gray