spice netlist 2 schematic (cadence composer)

[Rajeswaran M]

Hi,

Is there any cadence tool/flow to convert the spice netlist to schematic?

Regards
Rajeswaran

 

[Bernd Fischer]

In newer versions of Cadence DFII, CDL in uses the auto schematic generation
which is used also by Verilog in.

You can try that.

Bernd

Rajeswaran M wrote:

Hi,

Is there any cadence tool/flow to convert the spice netlist to schematic?

Regards
Rajeswaran

 

[Andrew Beckett]

On Fri, 24 Mar 2006 16:42:34 +0100, Bernd Fischer
<""bernd.fischer\"@xignal-A%&HY%$v#&G=.de"> wrote:

In newer versions of Cadence DFII, CDL in uses the auto schematic generation
which is used also by Verilog in.

You can try that.

Bernd

Rajeswaran M wrote:
Hi,

Is there any cadence tool/flow to convert the spice netlist to schematic?

Regards
Rajeswaran

And in IC610, there will be a proper SPICE/spectre to schematic generator,
rather than just the SPICE-like CDL format.

Andrew.

 

[John Gianni]

Andrew Beckett wrote:

In IC610, there will be a proper SPICE/spectre to schematic generator,
rather than just the SPICE-like CDL format.

In addition to the Spice-generation enhancements in the next DFII
release, as Andrew has correctly noted, there are plenty of home-grown
Spice-to-Schematic SKILL programs out there that you can avail yourself
use of.

Contact your Cadence sales team for example as I know of a few which
are written mostly by the service AEs for Customers on a case-by-case
basis. You'll have schematics in a jiffy.

--
John Gianni
Nothing stated by me here is prior sanctioned by my employer.