special 330nF/100V wanted!!!

N

news

Guest
Hello everybody!
I can't find anywhere such capacitor, could you advice where can I buy it?
330nF/100V or 63V ( 250pcs. )
isolation PPS type:
SMR10 334K100A03L4 EVOX RIFA
or
SMR10 334K63A01L4 EVOX RIFA

please respond on :
a.szostek@dgtronik.com.pl

thank you in advance.

Adam Szostek
DGTronik
 
On Mon, 8 May 2006 12:51:49 +0200, "news" <a.szostek@dgtronik.com.pl>
wrote:

Hello everybody!
I can't find anywhere such capacitor, could you advice where can I buy it?
330nF/100V or 63V ( 250pcs. )
isolation PPS type:
SMR10 334K100A03L4 EVOX RIFA
or
SMR10 334K63A01L4 EVOX RIFA

please respond on :
a.szostek@dgtronik.com.pl

thank you in advance.

Adam Szostek
DGTronik
Click to expand...
In another NG you said that you had tried the Poland distributor for
EVOX RIFA and they couldn't help you with these parts I am wondering
just how you approached them.

Not meaning to criticise, but in my experience when I have needed a
component which was not carried in stock in my country all I had to do
was tell the distributor "I wish to place an order for XYZ..." They
would then tell me "OK, but our minimum order value/qty is (value/qty)
and we will indent them from the manufacturer...". Now I don't know
the unit cost of the caps you want but I feel confident that a qty of
250 might just come close to the required value. Even if it didn't
then just order a few more and you'll have some spare. If the extra
stock is a problem you can't use or sell, then explain to your
customer (I assume there is one for these caps) that you will have to
charge for the total of the indent value. Or, don't tell him and cover
your indent cost plus profit, that's what a distributor does by
insisting on a minimum order value, so you are no different.

Of course there is the alternative of finding an equivalent from
another manufacturer or buying in from overseas suppliers who do have
them. I suppose you did try Google to look for alternative sources for
Metallized Polyphenylene Sulfide caps?

For example Dearborn http://www.dei2000.com/products/filmCapacitor.asp

Ask them to quote on a suitable type.

Next step if that doesn't succeed, research on the manufacturers of
film capacitors. (bottom half of this page)

http://www.interfacebus.com/capacitor.html

I'm sure one of them can help.
 
330nf green cap from 63vac to 100vdc
330nf polyester 600vac to 2000vdc

www.wescomponents.com

ph 02-97979866
fax 02-97166015
thay are in sydeny



"news" <a.szostek@dgtronik.com.pl> wrote in message
news:e3n7v6$7gh$1@nemesis.news.tpi.pl...
Hello everybody!
I can't find anywhere such capacitor, could you advice where can I buy it?
330nF/100V or 63V ( 250pcs. )
isolation PPS type:
SMR10 334K100A03L4 EVOX RIFA
or
SMR10 334K63A01L4 EVOX RIFA

please respond on :
a.szostek@dgtronik.com.pl

thank you in advance.

Adam Szostek
DGTronik
Click to expand...
 
Hi!
unfortunately distributors stocks are completely empty...
we are checking the equivalents from site you mentioned.
Thanks
Adam


Uzytkownik "Ross Herbert" <rherber1@bigpond.net.au> napisal w wiadomosci
news:1duv525djpdfrpspm59og81pbj73qm52j5@4ax.com...
On Mon, 8 May 2006 12:51:49 +0200, "news" <a.szostek@dgtronik.com.pl
wrote:

Hello everybody!
I can't find anywhere such capacitor, could you advice where can I buy
it?
330nF/100V or 63V ( 250pcs. )
isolation PPS type:
SMR10 334K100A03L4 EVOX RIFA
or
SMR10 334K63A01L4 EVOX RIFA

please respond on :
a.szostek@dgtronik.com.pl

thank you in advance.

Adam Szostek
DGTronik

In another NG you said that you had tried the Poland distributor for
EVOX RIFA and they couldn't help you with these parts I am wondering
just how you approached them.

Not meaning to criticise, but in my experience when I have needed a
component which was not carried in stock in my country all I had to do
was tell the distributor "I wish to place an order for XYZ..." They
would then tell me "OK, but our minimum order value/qty is (value/qty)
and we will indent them from the manufacturer...". Now I don't know
the unit cost of the caps you want but I feel confident that a qty of
250 might just come close to the required value. Even if it didn't
then just order a few more and you'll have some spare. If the extra
stock is a problem you can't use or sell, then explain to your
customer (I assume there is one for these caps) that you will have to
charge for the total of the indent value. Or, don't tell him and cover
your indent cost plus profit, that's what a distributor does by
insisting on a minimum order value, so you are no different.

Of course there is the alternative of finding an equivalent from
another manufacturer or buying in from overseas suppliers who do have
them. I suppose you did try Google to look for alternative sources for
Metallized Polyphenylene Sulfide caps?

For example Dearborn http://www.dei2000.com/products/filmCapacitor.asp

Ask them to quote on a suitable type.

Next step if that doesn't succeed, research on the manufacturers of
film capacitors. (bottom half of this page)

http://www.interfacebus.com/capacitor.html

I'm sure one of them can help.
Click to expand...
 
On Tue, 9 May 2006 11:12:02 +0200, "news" <a.szostek@dgtronik.com.pl>
wrote:

Hi!
unfortunately distributors stocks are completely empty...
we are checking the equivalents from site you mentioned.
Thanks
Adam
Click to expand...
Yes, I realise that the distributor doesn't have stock. However, the
job of a distributor is to act on your behalf and get the stock you
require in for you providing you place an order in accordance with the
minimum value/qty as stipulated by that company. They can't just say
"we don't have stock" and forget about you. They MUST take your order
or you would have a case to take direct to the manufacturer
complaining about the lack of representation of their product by the
distributor. At least that's how it works here...

Why don't you ask the distributor what is the minimum order value/qty
for indented stock?

In component sourcing there are always ways and means of getting what
you want... you just have to know how to be persuasive.


Uzytkownik "Ross Herbert" <rherber1@bigpond.net.au> napisal w wiadomosci
news:1duv525djpdfrpspm59og81pbj73qm52j5@4ax.com...
On Mon, 8 May 2006 12:51:49 +0200, "news" <a.szostek@dgtronik.com.pl
wrote:

Hello everybody!
I can't find anywhere such capacitor, could you advice where can I buy
it?
330nF/100V or 63V ( 250pcs. )
isolation PPS type:
SMR10 334K100A03L4 EVOX RIFA
or
SMR10 334K63A01L4 EVOX RIFA

please respond on :
a.szostek@dgtronik.com.pl

thank you in advance.

Adam Szostek
DGTronik

In another NG you said that you had tried the Poland distributor for
EVOX RIFA and they couldn't help you with these parts I am wondering
just how you approached them.

Not meaning to criticise, but in my experience when I have needed a
component which was not carried in stock in my country all I had to do
was tell the distributor "I wish to place an order for XYZ..." They
would then tell me "OK, but our minimum order value/qty is (value/qty)
and we will indent them from the manufacturer...". Now I don't know
the unit cost of the caps you want but I feel confident that a qty of
250 might just come close to the required value. Even if it didn't
then just order a few more and you'll have some spare. If the extra
stock is a problem you can't use or sell, then explain to your
customer (I assume there is one for these caps) that you will have to
charge for the total of the indent value. Or, don't tell him and cover
your indent cost plus profit, that's what a distributor does by
insisting on a minimum order value, so you are no different.

Of course there is the alternative of finding an equivalent from
another manufacturer or buying in from overseas suppliers who do have
them. I suppose you did try Google to look for alternative sources for
Metallized Polyphenylene Sulfide caps?

For example Dearborn http://www.dei2000.com/products/filmCapacitor.asp

Ask them to quote on a suitable type.

Next step if that doesn't succeed, research on the manufacturers of
film capacitors. (bottom half of this page)

http://www.interfacebus.com/capacitor.html

I'm sure one of them can help.
Click to expand...
 
On Tue, 9 May 2006 18:56:02 +1000, "crazy frog"
<dingding@bumbadabum.com> wrote:

330nf green cap from 63vac to 100vdc
330nf polyester 600vac to 2000vdc

www.wescomponents.com

ph 02-97979866
fax 02-97166015
thay are in sydeny
Click to expand...
Sorry, but green caps and polyester are not equivalent to metallized
Polyphenylene Sulfide (PPS). PPS is the replacement for Polycarbonate
in caps.

Without knowing just what the application and working environment are
for the caps I would be hesitant to simply swap PPS for MKT or
polyester film. They may well work,but.....


"news" <a.szostek@dgtronik.com.pl> wrote in message
news:e3n7v6$7gh$1@nemesis.news.tpi.pl...
Hello everybody!
I can't find anywhere such capacitor, could you advice where can I buy it?
330nF/100V or 63V ( 250pcs. )
isolation PPS type:
SMR10 334K100A03L4 EVOX RIFA
or
SMR10 334K63A01L4 EVOX RIFA

please respond on :
a.szostek@dgtronik.com.pl

thank you in advance.

Adam Szostek
DGTronik
Click to expand...
 
will metalised poly 250vdc 160vac axial
work.

"news" <a.szostek@dgtronik.com.pl> wrote in message
news:e3n7v6$7gh$1@nemesis.news.tpi.pl...
Hello everybody!
I can't find anywhere such capacitor, could you advice where can I buy it?
330nF/100V or 63V ( 250pcs. )
isolation PPS type:
SMR10 334K100A03L4 EVOX RIFA
or
SMR10 334K63A01L4 EVOX RIFA

please respond on :
a.szostek@dgtronik.com.pl

thank you in advance.

Adam Szostek
DGTronik
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top