speaker wire to RCA phono connector-- can this be used for p

[John Abnarthy]

I see these all over Ebay:

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.Xphono+to+screw.TRS0&_nkw=phono+to+screw&_sacat=0

They might be perfect for a project I have, except I want to use them to
transfer power of around 12 VDC @ 1 amp between components. Will these
connectors work for that, or is there truly a "balun" that's maybe a
coil of wire that would burn up when used for a power purpose?

Thank you,
John

 

[pfjw@aol.com]

On Thursday, April 27, 2017 at 8:48:04 AM UTC-4, John Abnarthy wrote:
or is there truly a "balun" that's maybe a
> coil of wire that would burn up when used for a power purpose?

Yes, and yes, it would.

Keep in mind that an RCA plug is a particularly wretched option for transferring power as it has exposed surfaces that may be shorted very easily. Yes, it may be only 12V, but still not a good idea.

I suggest either you use a standard barrel-type plug as with many wall-warts these days, or a phono-jack such as what was used in bygone days. These are much more difficult to short.

Peter Wieck
Melrose Park, PA

 

[Ralph Mowery]

In article <odsp40$pcg$1@dont-email.me>, jabnar@excite.net says...

I see these all over Ebay:

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.Xphono+to+screw.TRS0&_nkw=phono+to+screw&_sacat=0

They might be perfect for a project I have, except I want to use them to
transfer power of around 12 VDC @ 1 amp between components. Will these
connectors work for that, or is there truly a "balun" that's maybe a
coil of wire that would burn up when used for a power purpose?

Thank you,
John

I did see some that looked to be the same with the word balun in it. I
doubt any of those would have an actual balun type of transformer in
them. At the price they show, I would give them a try, especially
looking at the ones that do not hae the word balun in the description.

They probably use the word balun to describe going from a ballanced 2
wire system to one that is not ballanced.

 

[pfjw@aol.com]

On Thursday, April 27, 2017 at 10:31:27 AM UTC-4, Ralph Mowery wrote:

I did see some that looked to be the same with the word balun in it. I
doubt any of those would have an actual balun type of transformer in
them. At the price they show, I would give them a try, especially
looking at the ones that do not hae the word balun in the description.

They probably use the word balun to describe going from a ballanced 2
wire system to one that is not balanced.

These *are* transformer-based devices and not designed for any level of current other than AV signal currents.

Apart from all that, using an RCA jack or plug for the stated purpose is just not a very good solution in the first place.

Peter Wieck
Melrose Park, PA

 

[Jeff Liebermann]

On Thu, 27 Apr 2017 08:48:00 -0400, John Abnarthy <jabnar@excite.net>
wrote:

I see these all over Ebay:

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.Xphono+to+screw.TRS0&_nkw=phono+to+screw&_sacat=0

They might be perfect for a project I have, except I want to use them to
transfer power of around 12 VDC @ 1 amp between components. Will these
connectors work for that, or is there truly a "balun" that's maybe a
coil of wire that would burn up when used for a power purpose?

Fast answer as I run out the door. Yes, there's a balun inside. This
is the BNC version, but the phono plug variety is the same.
<http://www.cctvforum.com/viewtopic.php?f=6&t=29652>
Scroll down for the wiring diagram.

I've used these by the bucket load for security camera installations.
Plan on about 5% of what you buy being defective in some manner.

However, they are NOT made to handle DC. The transformer shorts the
line at both ends. See wiring diagram above. Also, there's no such
thing a speaker wire as I've seen speakers fed with almost every gauge
of wire available.

Perhaps it would be helpful if you disclose what you're trying to
accomplish and what you have to work with? There are similar device
made to handle DC over (for example) CAT5 without shoving DC through a
transformer (and causing the core to saturate).
--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

 

[Phil Allison]

John Abnarthy wrote:

I see these all over Ebay:

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.Xphono+to+screw.TRS0&_nkw=phono+to+screw&_sacat=0

They might be perfect for a project I have, except I want to use them to
transfer power of around 12 VDC @ 1 amp between components. Will these
connectors work for that, or is there truly a "balun" that's maybe a
coil of wire that would burn up when used for a power purpose?

** Not usable, as others have said already.

2-pin microphone plugs and sockets make excellent DC power connectors - low cost, polarised, short cct proof and very sturdy.

https://www.picclickimg.com/00/s/NzY4WDEwMjQ=/z/-OIAAOSwkx5XEFnd/$/502-Pin-Female-Microphone-Plug-Ham-Radio-CB-MicF2PIN-_57.jpg


...... Phil

 

[Michael A. Terrell]

John Abnarthy wrote:

I see these all over Ebay:

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.Xphono+to+screw.TRS0&_nkw=phono+to+screw&_sacat=0


They might be perfect for a project I have, except I want to use them to
transfer power of around 12 VDC @ 1 amp between components. Will these
connectors work for that, or is there truly a "balun" that's maybe a
coil of wire that would burn up when used for a power purpose?

I would use these CCTV power connectors:

2-1-x-5-5mm-DC-Power-12V-Male-Female-Jack-Adapter-Plug-Connector-for-CCTV-Camera


http://www.ebay.com/itm/221808269068


--
Never piss off an Engineer!

They don't get mad.

They don't get even.

They go for over unity! ;-)